BUK794R1-40BT,127

BUK71/794R1-40BT TrenchMOS™ standard level FET Rev. 01 — 4 November 2004 Product data 1. Product profile 1.1 Description N-channel enhancement mode field-effect power transistor in a plastic package using Philips High-Performance Automotive (HPA) TrenchMOS™ technology. The devices include TrenchPLUS diodes for over-temperature protection. Product availability: BUK714R1-40BT in SOT426 (D2-PAK) BUK794R1-40BT in SOT263B (TO-220AB). 1.2 Features ■ Integrated temperature sensor ■ Very low on-state resistance ■ Q101 compliant ■ 175 °C rated. 1.3 Applications ■ Electrical Power Assisted Steering ■ Motors, lamps and solenoids ■ 12 V loads ■ General purpose power switching. 1.4 Quick reference data ■ ■ ■ ID ≤ 75 A ■ Ptot ≤ 272 W. RDSon = 3.4 mΩ (typ) VDS ≤ 40 V 2. Pinning information Table 1: Pinning - SOT426 and SOT263B, simplified outline and symbol Pin Description 1 gate (g) 2 anode (a) 3 drain (d) 4 cathode (k) 5 source (s) mb mounting base; connected to drain (d) Simplified outline Symbol mb d a s k mb g 1 2 3 4 5 03nm72 Front view SOT426 (D2-PAK) MBK127 1 5 MBL263 SOT263B (TO-220AB) BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 3. Limiting values Table 2: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDS drain-source voltage (DC) VDGR drain-gate voltage (DC) VGS gate-source voltage (DC) ID drain current (DC) Conditions RGS = 20 kΩ Min Max Unit - 40 V - 40 V - ±20 V Tmb = 25 °C; VGS = 10 V; Figure 2 and 3 [1] - 187 A [2] - 75 A Tmb = 100 °C; VGS = 10 V; Figure 2 [2] - 75 A IDM peak drain current Tmb = 25 °C; pulsed; tp ≤ 10 µs; Figure 3 - 748 A Ptot total power dissipation Tmb = 25 °C; Figure 1 - 272 W Tstg storage temperature −55 +175 °C Tj junction temperature −55 +175 °C [1] - 187 A [2] - 75 A Tmb = 25 °C; pulsed; tp ≤ 10 µs - 748 A unclamped inductive load; ID = 75 A; VDS ≤ 40 V; VGS = 10 V; RGS = 50 Ω; starting Tmb = 25 °C - 1.5 J Human Body Model; C = 100 pF; R = 1.5 kΩ - 4 kV Source-drain diode reverse drain current (DC) IDR IDRM peak reverse drain current Tmb = 25 °C Avalanche ruggedness EDS(AL)S non-repetitive drain-source avalanche energy Electrostatic discharge Vesd [1] [2] Electrostatic discharge voltage; pins 1,3,5 Current is limited by power dissipation chip rating. Continuous current is limited by package. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 2 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 03na19 120 03nm69 200 ID (A) Pder (%) 150 80 100 40 50 Capped at 75 A due to package 0 0 0 50 100 150 200 Tmb (°C) 0 50 100 150 200 Tmb (°C) VGS ≥ 10 V P tot P der = ----------------------- × 100% P ° tot ( 25 C ) Fig 1. Normalized total power dissipation as a function of mounting base temperature. Fig 2. Continuous drain current as a function of mounting base temperature. 03nm68 103 ID (A) tp = 10 µs limit RDSon = VDS/ ID 100 µs 102 1 ms Capped at 75 A due to package D.C. 10 ms 10 1 10-1 100 ms 1 10 VDS (V) 102 Tmb = 25 °C; IDM single pulse. Fig 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 3 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 4. Thermal characteristics Table 3: Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Figure 4 - - 0.55 K/W SOT263B (TO-220AB) vertical in still air - - 60 K/W SOT426 (D2-PAK) minimum footprint; mounted on a PCB - - 50 K/W Rth(j-mb) thermal resistance from junction to mounting base Rth(j-a) thermal resistance from junction to ambient 4.1 Transient thermal impedance 03ni64 1 Z th(j-mb) (K/W) 10-1 δ = 0.5 0.2 0.1 0.05 0.02 10-2 δ= P tp T single shot t tp T 10-3 10-6 10-5 10-4 10-3 10-2 10-1 1 tp (s) 10 Fig 4. Transient thermal impedance from junction to mounting base as a function of pulse duration. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 4 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 5. Characteristics Table 4: Characteristics Tj = 25 °C unless otherwise specified Symbol Parameter Conditions Min Typ Max Unit Static characteristics V(BR)DSS VGS(th) IDSS drain-source breakdown voltage ID = 0.25 mA; VGS = 0 V Tj = 25 °C 40 - - V Tj = −55 °C 36 - - V gate-source threshold voltage ID = 1 mA; VDS = VGS; Figure 9 drain-source leakage current Tj = 25 °C 2 3 4 V Tj = 175 °C 1 - - V Tj = −55 °C - - 4.4 V Tj = 25 °C - 0.02 1 µA Tj = 175 °C - - 500 µA - 2 100 nA Tj = 25 °C - 3.4 4.1 mΩ Tj = 175 °C - - 7.8 mΩ VDS = 40 V; VGS = 0 V IGSS gate-source leakage current VGS = ±20 V; VDS = 0 V RDSon drain-source on-state resistance VGS = 10 V; ID = 50 A; Figure 7 and 8 VF temperature sense diode forward voltage IF = 1 mA 1.58 1.60 1.63 V SF temperature sense diode temperature coefficient IF = 1 mA; −55 °C < Tj < 175 °C −2.55 −2.83 −3.11 mV/K VGS = 10 V; VDD = 32 V; ID = 25 A; Figure 14 - 83 - nC - 18 - nC - 29 - nC VGS = 0 V; VDS = 25 V; f = 1 MHz; Figure 12 - 5106 6808 pF - 1389 1667 pF - 527 721 pF - 38 - ns - 82 - ns Dynamic characteristics Qg(tot) total gate charge Qgs gate-to-source charge Qgd gate-to-drain (Miller) charge Ciss input capacitance Coss output capacitance Crss reverse transfer capacitance VDD = 30 V; RL = 1.2 Ω; VGS = 10 V; RG = 10 Ω td(on) turn-on delay time tr rise time td(off) turn-off delay time - 141 - ns tf fall time - 90 - ns Ld internal drain inductance from drain lead 6 mm from package to center of die - 4.5 - nH from contact screw on mounting base to center of die SOT263B - 3.5 - nH from upper edge of drain mounting base to center of die SOT426 - 2.5 - nH © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 5 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET Table 4: Characteristics…continued Tj = 25 °C unless otherwise specified Symbol Parameter Conditions Min Typ Max Unit Ls internal source inductance from source lead to source bond pad; lead length 6 mm - 7.5 - nH Source-drain diode VSD source-drain (diode forward) voltage IS = 25 A; VGS = 0 V; Figure 16 - 0.85 1.2 V trr reverse recovery time - 70 - ns Qr recovered charge IS = 20 A; dIS/dt = −100 A/µs VGS = −10 V; VDS = 30 V - 55 - nC © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 6 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 03nq15 300 20 ID (A) 03nq17 12 Label is VGS (V) RDSon 10 (mΩ) 7 6.5 200 8 6 100 4 5.5 5 4.5 0 0 0 2 4 6 8 10 VDS (V) Tj = 25 °C; tp = 300 µs 4 12 16 VGS (V) 20 Tj = 25 °C; ID = 50 A Fig 5. Output characteristics: drain current as a function of drain-source voltage; typical values. Fig 6. Drain-source on-state resistance as a function of gate-source voltage; typical values. 03nq16 20 RDSon 8 6 Lable is VGS (V) 03aa27 2 a (mW) 6.5 15 1.5 10 1 7 5 8 0.5 10 20 0 0 100 200 ID (A) 300 Tj = 25 °C 0 -60 60 120 Tj (°C) 180 R DSon a = ---------------------------R DSon ( 25 °C ) Fig 7. Drain-source on-state resistance as a function of drain current; typical values. Fig 8. Normalized drain-source on-state resistance factor as a function of junction temperature. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data 0 Rev. 01 — 4 November 2004 7 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 03aa32 5 VGS(th) (V) 03aa35 10-1 ID (A) 4 max 10-2 3 typ 10-3 2 min 10-4 min typ max 10-5 1 0 -60 10-6 0 60 120 0 180 Tj (°C) 2 4 6 VGS (V) Tj = 25 °C; VDS = VGS ID = 1 mA; VDS = VGS Fig 9. Gate-source threshold voltage as a function of junction temperature. 03nq18 120 Fig 10. Sub-threshold drain current as a function of gate-source voltage. 03nh35 8000 C (pF) gfs (S) Ciss 6000 80 Coss 4000 40 2000 Crss 0 0 0 25 50 75 ID (A) 100 Tj = 25 °C; VDS = 25 V 10-1 10 VDS (V) 102 VGS = 0 V; f = 1 MHz Fig 11. Forward transconductance as a function of drain current; typical values. Fig 12. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data 1 Rev. 01 — 4 November 2004 8 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 03nq19 100 03nq21 10 VGS ID (A) (V) 8 75 VDD = 14 V 6 Tj = 175 °C 50 VDD = 32 V 4 Tj = 25 °C 25 2 0 0 0 2 4 6 VGS (V) 0 25 50 75 Q (nC) 100 g Tj = 25 °C; ID = 25 A VDS = 25 V Fig 13. Transfer characteristics: drain current as a function of gate-source voltage; typical values. 03nq79 1.8 Fig 14. Gate-source voltage as a function of turn-on gate charge; typical values. 03nq20 100 IS (A) VF (V) 75 1.6 Tj = 175 °C 1.4 50 1.2 25 Tj = 25 °C 0 1.0 0 50 100 150 Tj (°C) 200 IF = 1 mA 0.0 0.6 0.9 V 1.2 SD (V) VGS = 0 V Fig 15. Forward voltage of temperature sense diode as a function of junction temperature; typical values. Fig 16. Reverse diode current as a function of reverse diode voltage; typical values. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data 0.3 Rev. 01 — 4 November 2004 9 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 6. Package outline Plastic single-ended package; heatsink mounted; 1 mounting hole; 5-lead TO-220 SOT263B E p1 A ∅p A1 q D1 mounting base D L1 Q L2 m L 1 5 e b c w M 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b c D D1 E e L mm 4.5 4.1 1.39 1.27 0.85 0.70 0.7 0.4 15.8 15.2 6.4 5.9 10.3 9.7 1.7 15.0 13.5 (1) L1 2.4 1.6 L2 (2) 0.5 m ∅p p1 q Q w 0.8 0.6 3.8 3.6 4.3 4.1 3.0 2.7 2.6 2.2 0.4 Notes 1. Terminal dimensions are uncontrolled in this zone. 2. Positional accuracy of the terminals is controlled in this zone. OUTLINE VERSION REFERENCES IEC SOT263B JEDEC EIAJ 5-lead TO-220 EUROPEAN PROJECTION ISSUE DATE 01-01-11 Fig 17. SOT263B (TO-220AB). © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 10 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET Plastic single-ended surface mounted package (D2-PAK); 5 leads (one lead cropped) SOT426 A A1 E D1 mounting base D HD 3 1 2 4 e e Lp 5 b e c e Q 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b c D max. D1 E e Lp HD Q mm 4.50 4.10 1.40 1.27 0.85 0.60 0.64 0.46 11 1.60 1.20 10.30 9.70 1.70 2.90 2.10 15.80 14.80 2.60 2.20 OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-06-25 04-10-13 SOT426 Fig 18. SOT426 (D2-PAK) © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 11 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 7. Soldering 10.85 10.60 10.50 1.50 7.50 7.40 1.70 2.25 2.15 8.15 8.275 8.35 1.50 4.60 0.30 4.85 5.40 7.95 8.075 3.00 0.20 solder lands 1.70 (2×) solder resist 3.40 0.90 1.00 8.15 MSD058 occupied area solder paste Dimensions in mm. Fig 19. Reflow soldering footprint for SOT426. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 12 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 8. Revision history Table 5: Revision history Rev Date 01 20041104 CPCN Description - Product data; initial version. © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Product data Rev. 01 — 4 November 2004 13 of 15 BUK71/794R1-40BT Philips Semiconductors TrenchMOS™ standard level FET 9. Data sheet status Level Data sheet status[1] Product status[2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. Definitions customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 12. Trademarks TrenchMOS — is a trademark of Koninklijke Philips Electronics N.V. 11. Disclaimers Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors Contact information For additional information, please visit http://www.semiconductors.philips.com. For sales office addresses, send e-mail to: sales.addresses@www.semiconductors.philips.com. Product data Fax: +31 40 27 24825 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 9397 750 13954 Rev. 01 — 4 November 2004 14 of 15 Philips Semiconductors BUK71/794R1-40BT TrenchMOS™ standard level FET Contents 1 1.1 1.2 1.3 1.4 2 3 4 4.1 5 6 7 8 9 10 11 12 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Transient thermal impedance . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 14 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 © Koninklijke Philips Electronics N.V. 2004. Printed in The Netherlands All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 4 November 2004 Document order number: 9397 750 13954 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nexperia: BUK794R1-40BT