FRDM-KE16Z

www.nxp.com 5V Robust MCUs with Touch and CAN NXP Communicator Introducing KE1xZ64/32 5V Robust MCUs with Touch and CAN Based on the Arm Cortex‐M0+ with up to 48 MHz performance, providing up to 64 KB flash and 8 KB RAM along with a complete set of analog/digital features including Touch Sense and CAN, the KE1xZ64/32 MCUs extend the Kinetis E family with smaller memory footprint options for broad scalability. Communicator Finalization Date: Jan 2019 Global Full Market Launch Date: March 7, 2019 Embargo Date: None NXP, the NXP logo, NXP SECURE CONNECTIONS FOR A SMARTER WORLD, Airfast, Altivec, CodeWarrior, ColdFire, ColdFire+, CoolFlux, CoolFluxDSP, the CoolFlux logo, Embrace, Freescale, the Freescale logo, GreenChip, the GreenChip logo, HITAG, ICODE, I-CODE, JCOP, JCOS, Kinetis, Layerscape, LifeVibes, MagniV, Mantis, MIFARE, the MIFARE logo, MIFARE CLASSIC, MIFARE DESFire, MIFARE FleX, MIFARE Plus, MIFARE Ultralight, MIFARE4Mobile, the MIFARE4Mobile logo, MiGLO, mobileGT, NTAG, the NTAG logo, PEG, PowerQUICC, Processor Expert, QorIQ, QorIQ Qonverge, Qorivva, RoadLINK, the RoadLINK logo, SafeAssure, SmartLX, SMARTMOS, SmartMX, StarCore, Symphony, Tower, TriMedia, UCODE, the UCODE DNA logo, VortiQa and Vybrid are trademarks of NXP B.V. All other product or service names are the property of their respective owners. AMBA, Arm, Arm7, Arm7TDMI, Arm9, Arm11, Artisan, big.LITTLE, Cordio, CoreLink, CoreSight, Cortex, DesignStart, DynamIQ, Jazelle, Keil, Mali, Mbed, Mbed Enabled, NEON, POP, RealView, SecurCore, Socrates, Thumb, TrustZone, ULINK, ULINK2, ULINK-ME, ULINKPLUS, ULINKpro, µVision, Versatile are trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by NXP Semiconductors is under license. © 2019 NXP B.V. Kinetis E Kinetis E Portfolio The Kinetis E portfolio is a 5V MCU family that includes MCUs ranging from 8KB up to 512KB Flash, from 20 MHz Arm® Cortex®‐M0+ MCUs to 168 MHz Arm Cortex‐M4 MCUs, and peripherals such as CAN, Touch, and ECC to address a variety of application requirements. With 2.7‐5.5 V supply and focus on EMC/ESD robustness, Kinetis E family is well suited for a wide range of applications in electrical harsh environments Kinetis KE1xZ Product Family The 5 V Kinetis KE1xZ MCU family features a 48/72 MHz Arm Cortex‐M0+ core with up to 256 KB flash, 32 KB SRAM, and a complete set of analog/digital features. The new Touch Sense Interface (TSI) provides a high level of stability and accuracy for your HMI system, while the 1‐ Msps ADC and FlexTimer modules offer a perfect solution for Brushless DC (BLDC) motor‐ control systems. Kinetis KE1xZ64/32 Product Family KE1xZ64 product family is based on CM0+ core running at 48 MHz, offering smaller memory options: 64KB/8KB or 32KB/4KB Flash/SRAM. It expands the KE1xZ series down to 64KB and 32KB flash options, 8KB and 4KB SRAM options, leading to optimized BOM cost along with TSI and CAN interfaces • KE14Z: broad offering with mixed‐signal integration, ADC, ACMP, Timers, PDB, now ranging from 32KB Flash to 256KB Flash • KE15Z: expansion from KE14Z family, with addition of TSI module, now ranging from 32KB Flash to 256KB Flash • KE16Z: NEW, expanding from KE15Z family, with addition of CAN module Target Applications Kinetis E Target Application x Home Appliance o A/C, washer, MWO, induction cooker etc. o UI, main board control (touch, non‐touch) x Motor and Power Control o Motor, inverter and fan control o Low power UPS communication and UI control x Industrial Control o Factory automation, HMI control, alarm monitor o Elevator external calling board o Circuit breaker, MCCB/ACB x General 5V Robust Use Cases KE1xZ64/32 Market Positioning KE1xZ64/32 Product Overview KE1xZ64/32 Key Highlights x Robust for harsh EMC environment x 2.7V – 5.5V Power Supply & 5V I/O pads x EMC Test Performance x Capacitive Touch sensing solution that provides a compelling user experience x Supports both self‐cap and mutual‐cap mode x 25 touch sensing channels x High performance in liquid tolerance x Rich feature integration for industrial and motor control x CAN bus x PWM, Timers, 1Msps ADC, Comparator x Scalable Portfolio x Expands the KE1xZ series down to 64KB and 32KB Flash options x Optimizes BOM cost KE1xZ64 Block Diagram Key features Core/System Memory • ARM ® Cortex ® ‐M0+ up to 48MHz • up to 64KB Flash • MMDVSQ • up to 8KB SRAM Communications Timers • 3 x LPUART / 1 x LPSPI / 1 x LPI2C • 1 x 6ch FTM (PWM) • MSCAN • 1 x 2ch FTM (PWM/Quad Dec.) Analog • 1 x PDB • 1 x 12b ADC, 1MSPS • 1 x 4ch LPIT / 1 x LPTMR / 1 x PWT • 1 x ACMP • 1 x RTC • 25ch touch pins Packages • 48LQFP (7mmx7mm, 0.5mm pitch) Others • 2.7‐5.5V, ‐40 to 105oC Development tools and Ecosystem Development board (Part Number: FRDM­KE16Z), orderable now, shipping from Feb 28, 2019. FRDM­KE16Z Freedom Development Board The FRDM‐KE16Z Freedom Board is designed to work in standalone mode or as the main board of FRDM‐TOUCH. This Freedom board is compatible with DC 5v and 3.3v power supply and features a KE16Z. The onboard interfaces include an RGB LED, a 6‐axis digital sensor, a 3‐axis digital angular rate gyroscope, an ambient light sensor, CAN control interface and capacitive touch pad. x x x x x x x x MKE16Z64VLF4 MCU (Arm® Cortex® CM0+ 48LQFP package) I/O headers for easy access to MCU I/O pins Compatible with FRDM‐TOUCH, FRDM‐MC‐LVBLDC, and Arduino™ boards Onboard debug circuit: K20DX128VFM5 (OpenSDA) with a virtual serial port NXP inertial sensor, FXOS8700CQ Reset push button, two user buttons and one RGB LED Touch electrodes in self‐capacitive mode CAN communication interface FRDM­TOUCH The FRDM‐TOUCH is a Touch Module for FRDM‐KE15Z and FRDM‐KE16Z with Capacitive Touch sliders. This board can connect FRDM‐KE15Z/ and FRDM‐KE16Z and control the on‐board RBG LED by using keys, slider and rotary touches. x x x Touch Module for FRDM‐KE15Z and FRDM‐KE16Z Easy and simple way to evaluate the touch pad, slide and wheel. Including self‐cap and mutual‐cap modes Software Enablement The FRDM‐K16Z is enabled using NXP MCUXpresso SDK, MCUXpresso Config Tools, MCUXpresso IDE and a large software partner ecosystem. z Integrated development environments x IAR Embedded Workbench®, iar.com/kinetis x Arm Keil® Microcontroller Development Kit, keil.com/nxp x NXP MCUXpresso, nxp.com/mcuxpresso — An open-source software development kit (SDK) — An easy-to-use integrated development environment (IDE) — A comprehensive suite of system configuration tools, including pins, clocks, SDK builder and more — Broad Arm ecosystem support through NXP Connect partners z Online enablement with Arm mbed™ development platform x Rapid and easy Kinetis MCU prototyping and development x Online mbed SDK, developer community x Free software libraries z Boot­loader x Common boot-loader for all Kinetis MCUs x In-system Flash programming over a serial connection: erase, program, verify x ROM- or Flash-based boot-loader with open-source software and host-side programming utilities