LS1021ASN7HNB

Dual-core solution with integrated LCD controller for fanless applications QorIQ6SoloX i.MX LS1021A applications processors and could be on two Communications Processor lines The QorIQ LS1021A processor delivers extensive integration and power efficiency for fanless, small form factor networked applications. TARGET APPLICATIONS } Enterprise AP routers for 802.11ac/n that must perform more securely, intelligently and efficiently without sacrificing performance. } Multi-protocol IoT gateways CORE COMPLEX } Industrial and factory automation The QorIQ LS1021A processor integrates dual ARM Cortex-A7 cores running up to 1.2 GHz with ECC protected L1 and L2 caches. Both cores feature 32 KB of L1 instruction and data cache, share up to 512 KB of coherent L2 cache, and feature the NEONTM SimD module and dual precision floating-point unit (FPU). The DDR 3L/4 memory controller supports 8-, 16- or 32-bit interfaces at up to 1600 MHz. } Mobile wireless routers } Printing } Building automation } Smart energy Incorporating dual ARM® Cortex®-A7 cores with ECC protection running up to 1.2 GHz, the QorIQ LS1021A is engineered to deliver over 7,000 CoreMarks® of performance, as well as virtualization support, advanced security features and a broad array of high-speed interconnects and optimized peripheral features ever offered in a sub-3 W processor. UNPARALLELED INTEGRATION The QorIQ LS1 family of devices is designed to enable a new class of power-constrained applications by bringing together highly efficient ARM cores and over twenty years of our company’s networking expertise and IP to offer a high level of integration under 3 W. With ECC protection on both L1 and L2 caches, QUICC Engine support, USB 3.0, and a broad range of other peripheral and I/O features, the LS1 family of devices is purpose-built for multicore platforms SYSTEM INTERFACES AND NETWORKING A four-lane, 6 GHz multi-protocol SerDes provides support for high-speed interfaces, including up to three Gigabit Ethernet ports with IEEE® 1588 support, dual DMA controlled PCI Express® generation 2.0 ports and a single SATA 3.0 port. The LS1021A processor also features dual USB controllers— one supporting SuperSpeed USB 3.0 with integrated PHY, the other supporting USB 2.0 functions. Additional interfaces include QuadSPI, IFC and support for SD/MMC. For network. QorLQ LS1021A PROCESSOR BLOCK DIAGRAM System Control All QorIQ LS series devices are supported by our extensive third-party ecosystem. In conjunction with our expertise and worldwide support infrastructure, the ecosystem helps customers accelerate their migration from both competitive solutions and from legacy devices, preserve investment costs and reduce time to market. CODEWARRIOR DEVELOPMENT SUITES FOR NETWORKED APPLICATIONS LS Tower Suite Level This suite was created to give you an economic, yet complete full-featured development tool for QorIQ LS development when the LS part is in a Tower Board configuration. The tools in this suite have no limitations other than they will only work with the Tower Board. Developer Suite Level This suite is the primary suite for customers who develop with multicore processors built on Power Architecture® including, QorIQ LS series devices and QorIQ Qonverge SoCs as well as DSPs based on StarCore technology. It is for 32 KB I Cache 32 KB D Cache NEON 32 KB I Cache DDR3L/4 Memory Controller 512 KB Coherent L2 Cache System Interfaces IFC Flash Security (XoR, CRC) Audio Subsystem: 4x I2S, ASRC, SPDIF Ethernet 3x I2C, 2x SPI, GPIO uQE (HDLC, TDM, PB) Ethernet 1x SD/MMC 2x DUART, 6x LP UART 128 KB SRAM Cache Coherent Interconnect (CCI 400) QuadSPI Flash FlexTimer, PWM USB 2.0 4-Lane 6 GHz SerDes USB 3.0 w/ PHY Core Complex Basic Peripherals and Interconnect Accelerators and Memory Control designers with full system responsibility but no need for the extra costs of the specialist and architect features. Specialists Suite Level This suite is designed so you can do more than just compile and debug. Tools in this suite are useful for customers creating products for every market. Get all the software included in the Developer Suite plus additional boardanalysis tools. These tools can be used by all customers in any market but not everyone in a customer’s organization needs these tools. Networking Elements Architect Suite Level This suite would best be used by personnel who have a need to dig deep into the networking aspects of a development project. In this suite, you will get all the software in the Specialist Suite plus software tools designed to give networking experts the extra capability to find out how their system is really working. Learn more at www.nxp.com/CW4NET QorIQ LS1021A PROCESSOR FEATURES Dual ARM Cortex-A7 cores Power efficiency, engineered to deliver over 7,000 CoreMarks. Typical total system power of 3 W for improved performance without increased power utilization. ECC-protected L1 and L2 cache memories The QorIQ LS1 family devices are the only processors in their class with ECCprotected caches and coherent 512 KB L2, adding performance and meeting networking requirements for high reliability. Integrated security engine, (SEC 5.5) High speed security protocol processing, including IPsec, SSL, DTLS, and IKE. Rich connectivity and peripheral features, High versatility that enables support for 802.11ac modules and high bandwidth including PCI Express Gen 2, USB 3.0, connectivity for ASICs, 4G/LTE, SATA and low-cost NAND/NOR Flash SATA 3, IFC, QuadSPI, CAN LCD controller (2D-ACE) Touchscreen support adds integrated HMI featured for enhanced ease of use and BOM savings. Similar IP as Vybrid controller solutions and i.MX applications processors to allow for simple software migration. QUICC Engine) Proven support required for industrial, building and factory protocols such as PROFIBUS, HDLC and TDM Support for hardware-based virtualization Enables partitioning of physical and virtual resources on LS1021A multicore parts for increased system flexibility DDR3L/4 First in its class to offer support for DDR4 memory, ensuring continued performance efficiency www.nxp.com/QorIQ NXP, the NXP logo, CodeWarior and QorIQ are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Layerscape and Tower are trademarks of Freescale Semiconductor, Inc. ARM is a registered trademark of ARM Limited. ARM Cortex-A7 is a trademark of ARM Limited. All other product or service names are the property of their respective owners. © 2020 NXP B.V. Document Number: LS1021AFS REV 6 cc 32 KB D Cache FPU DMA COMPLETE ENABLEMENT, RICH ECOSYSTEM For customer evaluation, the QorIQ LS1021A processor is supported by the TWR-LS1021A development platform, based on the modular Tower® System, and features an integrated on-board probe for further cost savings. The TWR-LS1021A evaluation kit includes a Linux® 3.12 SDK with optimized drivers and a free 90 day evaluation license for the CodeWarrior development studio supporting ARM development tools. NEON SATA 3.0 Power Management FPU ARM® Cortex®-A7 Core PCIe 2.0 Security Fuses Security Monitor ARM® Cortex®-A7 Core PCIe 2.0 Internal Boot ROM Ethernet audio applications, the LS1021A processor includes support for both ASRC® and SPDF. For industrial applications, the processor provides four CAN ports and up to 10 UARTS to support industrial protocols. In addition, Serial IO includes three I2C and two SPI interfaces.