MC33PF8200DAES

Analog Analog Solutions—Robust, Reliable Performance Analog Products for the Industrial Market Making Embedded Systems Better Leveraging a legacy of automotive analog leadership, Freescale also provides industrial Target Applications solutions designed for safety, reliability and performance. As the preferred Freescale • Factory automation Programmable MCU partner, our robust, reliable, high-performance analog solutions bridge real-world signals with connected processor intelligence, enabling complete embedded system solutions. These analog products are designed for a broad array of applications, including factory automation systems, industrial networking and power management equipment, portable medical products, smart home and building controls as well as energy storage systems. Freescale’s products are designed and manufactured with rigorous process controls and qualified using industry standard methodologies designed to yield defect rates in line with the stringent requirements of the industrial market. With more than 30 years in the automotive industry, Freescale is a trusted partner, providing the highest quality products with robust, rugged and differentiated features ideal for operation in harsh environments and high-performance requirements. In addition, Freescale’s product longevity program ensures availability of many analog products for a minimum of 10 or 15 years from the time of release. Freescale is the optimal choice for functional safety with industry-leading quality and reliability, deep auto experience, vast resources for development and innovation and strategic alliances with third-party experts. Functional safety is critical to maintaining high operational availability and ensuring predictable system behavior in response to unexpected system faults. Freescale Analog MCU Attach Logic Control (PLC), I/O, robotics, functional safety systems • Building and home automation HVAC, elevators, security camera and access control • Energy conversion and storage UPS, grid storage, battery management systems • Industrial transportation special vehicles, engine control, e-bikes, CAN nodes • Medical electronics motor drivers, power management for portable systems Building on a 35-year legacy of exceeding the stringent safety requirements of the automotive industry, products in Freescale’s Analog Portfolio Summary for Industrial Market Family expanded analog portfolio are well equipped to meet the equally rigorous safety requirements Device Description MC34901 Robust, system-cost effective single / dual CAN high-speed physical layer, offering lowest quiescent current (8 µA) while exceeding stringent EMC/ESD requirements without external choke MC34CM0902 Interface and Transceivers of the industrial space. Many MC33664 2 Mbps isolated network high-speed transceiver with dual SPI architecture to conveniently interface a microcontroller up to 15-node system with Battery Cell Controller devices MC33771 / MC33772 MC34978 36 V Analog switch interface multiplexer for translating 22 I/Os onto a single MCU SPI bus with very low quiescent current (30 µA), configurable wetting currents (from 2 mA to 20 mA), integrated temperature and supply sensors and available in a small 5 mm x 5 mm QFN package products feature advanced MC34FS6407 functional redundancies, system MC34FS6408 health monitoring and system MC34FS4409 fault controls that play critical MC34903 roles in system safety. MC34904 System Power Management Freescale: A Leader in Analog Solutions MC34905 MMPF0100 MMPF0200 MC33PF3000/1 MC34PF3000/1 Expanding on more than 30 years of innovation, Freescale is a leading MC34VR500 provider of high-performance MC33771 MC33772 products that use SMARTMOS technology combining digital, power and standard analog functions. MM912_637 Battery Management MM9Z1_638 36 V System Basis Chip with energy-efficient DC/DC power conversion up to 1.5 A (2.0 A on Vpre) and low-voltage operation with advanced functional safety mechanisms and integrated CAN transceiver 32 V System Basis Chip with energy-efficient DC/DC pre-regulator and power management up to 0.5A (2.0 A on Vpre) with multiple switch to ground I/Os, safety measures and robust CAN transceiver 28 V System Basis Chip for flexible and safe power management up to 400 mA with multiple low dropout (LDO) regulators with low quiescent current (down to 15 µA), integrated CAN high-speed transceiver and built-in safety features Most economical quick-turn programmable 14-channel,11.7 A (7.5 A for MMPF0200) system power management solutions with fully configurable voltages, sequencing and timings optimized for use with i.MX 6 series applications processors Optimized quick-turn programmable 12-channel, 7.3 A system power management solutions with fully configurable voltages, sequencing and timings optimized for use with i.MX 7 and i.MX 6 series applications processors available in a 7 mm x 7 mm package 9-channel power management IC, optimized to work with LayerScape LS1 network processor systems with custom pre-programmed output voltages, sequencing, and timings 3 to 14-cell Li-Ion Battery Cell Controller compatible for 5 V up to 1000 V packs with 2 Mbps transformer coupled daisy chain transceivers, 300 mA passive cell balancing and shunt current sensor 16-bit integrated MCU with 3 x 16-bit ADC for precision lead acid and Li-Ion battery monitoring solutions with low system power consumption for mission-critical applications up to 52 V and higher voltage battery pack monitoring Freescale supplies analog and MC34674/5 Scalable high input voltage linear chargers for single cell Li-Ion and Li-Polymer batteries up to 1.2 A charge current with constant voltage accuracy down to 0.4% and constant current accuracy down to 5% available into a small 8-lead 2 mm x 3 mm x 0.65 mm UDFN thermally enhanced package power management ICs that are MC32BC3770 2.0 A switch-mode charger with intelligent power-path for 1-cell Li-Ion and Li-Polymer battery advancing the automotive, consumer, MC34981 High current and high frequency 30 A / 27 V, 60 kHz, 4 mΩ high side switch with protected half bridge configuration enabling up to a 25% board area reduction and module simplification MC34982/4/8 Self protected multipurpose single 2 mΩ, dual 4 mΩ or 8 mΩ low RDS(on) SPI-driven high side switches for flexible load management from 7 A to 30 A MC36XSD Scalable, programmable family of 24 A/36 V SPI-driven, dual-channel, smart high-side switches from 6-to-50 mΩ RDS(on) for up to a 30% board reduction, and optimum for dense high-current switching applications MC12XSF Scalable family of 22 A/18 V programmable penta, quad and triple high-side switches from 7-to-40 mΩ RDS(on) with wide range diagnostic current sensing for up to 30% smaller PCB and 50% lower component count MC33882 Smart 6-output low-side switches able to control loads up to 1.0 A, daisy chainable SPI and parallel inputs control with PWM capability on all outputs MC34671/3 industrial and networking markets. Analog solutions interface with real world signals to control and drive Smart High Side eXtreme Switches for complete embedded systems. Smart Low Side Switches MC33880 MC33879 MC33996 MC33999 Valve Drivers MC34SB0800 MC34SB0410 Configurable 8-output serial switches for load control up to 2.0 A with SPI, up to 2 direct control outputs for PWM applications and very low standby current, including monitoring and protection features 16-ouput low-side switches able to control loads up to 2.5 A, daisy chainable SPI with or without parallel inputs mode for PWM capability on all outputs Fully integrated octal, quad valves and pump controller system on chip solutions with SPI, PWM up to 5 kHz (5.0 A), real-time valve current regulation (2.25 A – 2% precision w/ calibration) and integrated safe MOSFET for switching off all valves at once in case of emergency MPC17510/29 MPC17531/33 MPC17C724 Low operating voltage (2 V to 15 V) monolithic single and dual H-Bridge for portable applications designed with low quiescent, integrated protection and diagnostics, 1 A output drive and PWM control input frequency up to 200 kHz capabilities MC34933 Power Drivers MC34931S MC34932S MC33HB2000 MC33HB2001 MC34937 Gate Drivers MC34GD3000 MC33883 Small Engine Controllers MM912_812 MC33813/4 Medium operating voltage (5 V to 36 V) monolithic single and dual 5A H-Bridge power ICs designed for harsh environments with selectable slew rate control, PWM up to 20 kHz, integrated protection and diagnostics in a thermally enhanced package 3.0 A H-Bridge motor driver (5 V to 28 V) with SPI control for increased flexibility (current limits and slew rates configurable), low RDS(on) outputs (235 mΩ or 120 mΩ), daisy chainable, real time current mirror and available in 32-lead SOIC and PQFN packages 3-phase high current FET pre-driver (>1 A) with extended voltage range (6 V to 58 V), PWM (> 20kHz), robust fault-monitoring and failure protection for industrial brushless DC motor control (BLDC) H-Bridge gate driver with charge pump, independent high and low side gate driver channels, PWM up to 100 kHz and up to 1.0 A peak gate driver current Engine control analog power ICs for 25-1000cc, 1- to 4-cylinder motorcycle and other small engines For more information visit freescale.com/analogindustrial Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Layerscape and SMARTMOS are trademarks for Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2014–2015 Freescale Semiconductor, Inc. Document Number: INDCONTANLPRDFL REV 6