MCIMX6SLL-EVK

High-performance, low power applications processor for industrial and consumer markets i.MX 6SLL Applications Processors The i.MX 6SLL applications processor is a high-performance, low power consumption processor family featuring NXP’s advanced implementation of a single ARM® Cortex-A9 core, which operates at speeds up to 1GHz. TARGET APPLICATIONS FEATURES  Human machine interface (HMI)  Single Cortex-A9 core with the NEON SIMD engine and a floating point engine.  Home energy management systems  Portable medical  Intelligent industrial control systems  Smart appliances  Smart energy concentrators  Color and monochrome eReaders  Multilevel memory system based on the L1 instruction and data caches, L2 cache, and internal and external memory.  Low power DDR controller supports 32-bit LPDDR2 and LPDDR3.  Powerful 2D graphics processor called the pixel processor (PXP) that can support CSC, dithering, rotation, resize, overlay and new generation EPDC waveform processing. The i.MX 6SLL processor represents NXP’s latest achievement in i.MX 6 applications processors, which are part of a growing family of industrial and consumer products that offer high performance processing and are optimized for lowest power consumption.  Supports connections to a variety of interfaces including high-speed USB on-the-go with PHY, high-speed USB host PHY, multiple expansion card ports (high-speed MMC/SDIO host and other), and a variety of other popular interfaces (such as UART, I2C, and I2S). The processor features NXP’s advanced implementation of a single ARM® Cortex®-A9, which operates at speeds up to 1GHz. The processor provides a 32-bit DDR interface that supports LPDDR2 and LPDDR3. In addition, there are a number of other interfaces for connecting peripherals, such as WLAN, Bluetooth™, GPS, hard drive, displays, and camera sensors.  E Ink display controller supports EPD panel up to 2332 x 1650 resolution and 5-bit grayscale.  Advanced hardware-enabled security features that enable secure information encryption, secure boot, and secure software downloads.  GPIO with interrupt capabilities supports configurable dual voltage rails at 1.8 V and 3.3 V supplies. PACKAGE TECHNOLOGY i.MX 6SLL BLOCK APPLICATIONS i.MX 6SLL DIAGRAMPROCESSOR BLOCK DIAGRAM The i.MX 6SLL applications processor provides multiple compatible and scalable package options. The 14 x 14 BGA with 0.65 mm pitch brings out all features and GPIO. It is ideal for simple and cost-optimized PCB design. The 13 x 13 BGA with 0.5 mm pitch provides smaller form factors than ever before for space-constrained applications. Smart DMA 256 KB L2-cache Embedded Trace Macrocell PMU Multimedia 96 KB ROM USB 2.0 OTG with PHY x 2 SPI x 4 Temp Monitor GPIO 8x8 Keypad I2S/SSI x 3 Security eFuse 24-bit Parallel Display Interface (LCD) Secure RTC External Memory 32-bit DRAM Controller 400 MHz LPDDR2/LPDDR3 128 KB RAM I2C x 3 HAB i.MX 6SLL DEVICE OPTIONS Feature MCIMX6V2CVM08AB  Design services  System integrators CSI 800 MHz 1 GHz 32 KB-I, 32KB-D, 256 KB L2 128 KB 32-bit LPDDR2/LPDDR3 USB with PHY OTG, HS/FS x 2 16-bit Parallel CSI LCD EPDC MCIMX6V7DVN10AB ARM® Cortex-A9 Cache DRAM 24-bit Parallel LCD 0 1 SDIO/UART/IIC/SPI 3/5/4/4 I2S/SSI 3 S/PDIF 1 Timer/PWM Temperature 3/4 -40°C to 105°C (Tj) i.MX 6SLL EVK 0°C to 95°C (Tj) MCIMX6SLL-EVK FEATURES Processor • i.MX 6SLL 1 GHz ARM® Cortex®-A9 core PMIC • PF0100 Memory • LPDDR3 running at 400 MHz • Footprint for eMMC • 2 x SD card sockets Display board interface • Footprint of EPD connector • LCD daughter card Audio • • • • Connectivity • USB host connectors • Micro USB OTG connector Debug • JTAG connector (footprint) • One console UART LCD • MCIMX28LCD (sold separately)  Quick Start Guide www.nxp.com/iMX6SLL NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved. © 2017 NXP B.V. Date of Release: April 2017 Document Number: IMX6SLLFAMA4FS REV 0 UART x 5 Optional OCRAM  A bootable SD card containing Linux OS eMMC 5.0/ SD 3.0 x 3 S/PDIF Tx/Rx E-INK™ Display Controller (EPDC) Internal Memory  Embedded board solutions  Power supply and USB cable 32 KB D-cache 16-bit Parallel Camera Interface Speed  i.MX 6SLL applications processor-based system 32 KB I-cache Power Management  Middleware/applications i.MX 6SLL EVK CONTENTS RTC and Reset 2D Graphic Acceleration CSC/Rotation/Resize/Overlay Core The i.MX 6SLL processor is supported by the i.MX 6SLL (MCIMX6SLL-EVK) evaluation kit that includes a CPU module, base board and comes with an SD card pre-installed with Linux® operating system. NEON™ MPE co-processor Connectivity Watch Dog x 2  Codecs SOFTWARE AND TOOLS PLL, OSC PWM x 4 Partner solutions include:  Training ARM® Cortex®-A9 core up to 1 GHz Timer x 3 Leveraging the broad ARM community, the i.MX 6 series builds technology alliances to enable better customer solutions and faster time-to-market.  Software CPU Platform Secure JTAG IOMUX i.MX 6 SERIES ECOSYSTEM  Tool chains System Control Wolfson WM8962 audio codec Audio HP jack External speaker connection Microphone