MF1P4131DA4/01J

MF1P(H)x1y1 MIFARE Plus EV1 Rev. 3.2 — 6 December 2018 366932 1 Product short data sheet COMPANY PUBLIC General description Migrate classic contactless smart card systems to the next security level with the next evolution of the proven MIFARE Plus product family. MIFARE Plus EV1 brings benchmark security and additional features to mainstream contactless smart card applications. It is the only mainstream IC compatible with MIFARE Classic EV1 1K (MF1S50yyX/V1), MIFARE Classic EV1 4K (MF1S70yyX/V1) and the MIFARE Plus EV0 product family (MF1PLUSx0y1 and MF1SPLUSx0y1) which offers a seamless upgrade path for existing infrastructure and services. MIFARE Plus EV1 enables system operators to selectively upgrade security relevant applications. The ability to operate non-security relevant applications on existing CRYPTO1 infrastructure minimizes total cost of ownership (TCO) for the whole infrastructure eco-system. After switching to Security Level 3, MIFARE Plus EV1 uses Advanced Encryption Standard (AES) based on open global standards for cryptographic methods for authentication, data integrity protection and data encryption. Variants with EEPROM sizes up to 4K cater for the growing number of contactless applications and thus growing memory needs. This support empowers system operators to add future applications as needed while relying on an established product standard. The use of the MIFARE Application Directory (MAD) simplifies the future on-boarding of new applications on a MIFARE Plus EV1, see Ref. 5. AES for data encryption and integrity protection is also used for the secure end-to-end channel communication capabilities of MIFARE Plus EV1. This new evolution allows system operators to remotely manage card content over-the-air, even for Crypto1 operated applications. Additional applications and services can thus be created remotely after card issuance in a secure way, further enhancing TCO. The Transaction MAC feature securely verifies the authenticity of a transaction. In example for systems with multiple service providers that are using the same wallet and clearing service, the Transaction MAC feature proves to the clearing house that transactions between service providers and customers are genuine. It can also be used to verify transactions in numerous offline scenarios or where real-time online authentication capabilities are not feasible for system operators. For easy integration with mobile devices and other convergence media, MIFARE Plus EV1 also supports communication via ISO/IEC 7816-4 APDUs . To increase flexibility, system can freely choose to communicate in the native and APDU mode. MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 2 Features and benefits • • • • • • • • • • • • • • • • • • 3 2 kB, 4 kB EEPROM 7-byte UID, 4-byte NUID 1 Supports ISO/IEC 14443-3 Random ID for all UID types Communication speed up to 848 kbps Freely configurable access conditions Security Level (SL) concept for seamless migration from legacy infrastructure to high level SL3 security Sequential writing of the personalization keys (in SL0) AES-128 cryptography for authentication and secure messaging (optional in SL1, mandatory in SL3) SL3 CardSecurityLevel or sector-by-sector security level upgrade possible (SectorSecurityLevel) SL1SL3Mix mode to allow secure back-end connections into SL1 sectors Multi-sector authentication, multi-block read and write Anti-tearing mechanism for AES keys, sector trailers, configuration and optionally for data block writing Virtual card concept using ISO/IEC 7816-4 compliant selection method Proximity check fully ISO/IEC 14443-3 compliant Transaction MAC on value and data blocks Direct commit personalization from SL0 to SL1 or SL3 Common Criteria Certification: EAL5+ targeted ECC Originality signature Applications • • • • Public transportation Access management Electronic toll collection Loyalty and micro-payment 1 ISO/IEC 14443-x used in this data-sheet refers to ISO/IEC 14443 Type A. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 2 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 4 Quick reference data Remark: all values are target values only and subject to change until final product release. Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit Ci input capacitance MF1P1y1 Tamb = 25°C; fi = 13.56 MHz; 1.5V RMS 16.15 17 17.85 pF input capacitance MF1PHx1y1 Tamb = 25°C; fi = 13.56 MHz; 1.5V RMS 66.5 70 73.5 pF - 13.56 - MHz 25 - - year 500000 - cycle fi input frequency EEPROM characteristics tret retention time Tamb = 22 °C Nendu(W) write endurance Tamb = 22 °C; excluding anti-tearing 200000 for AES keys or sector trailers in SL 3 MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 3 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 5 Ordering information Table 2. Ordering information Type number Package Name MF1P2101DA4/02 MF1P2131DA4/02 MF1P4101DA4/02 MF1P4131DA4/02 MF1P2101DA6/02 MF1P2131DA6/02 MF1P4101DA6/02 MF1P4131DA6/02 MF1P2101DUD/02 MF1P2131DUD/02 MF1P4101DUD/02 MF1P4131DUD/02 MF1P2101DUF/02 MF1P2131DUF/02 MF1P4101DUF/02 MF1P4131DUF/02 MF1PH2101DA4/02 MF1PH2131DA4/02 MF1PH4101DA4/02 MF1PH4131DA4/02 MF1PH2101DA6/02 MF1PH2131DA6/02 MF1PH4101DA6/02 MF1PH4131DA6/02 MOA4 MOA4 MOA4 MOA4 MOB6 MOB6 MOB6 MOB6 FFC FFC FFC FFC FFC FFC FFC FFC MOA4 MOA4 MOA4 MOA4 MOB6 MOB6 MOB6 MOB6 MF1PH2101DUD/02 FFC MF1PH2131DUD/02 FFC MF1PH4101DUD/02 FFC MF1PH4131DUD/02 FFC MF1PH2101DUF/02 MF1PH2131DUF/02 MF1PH4101DUF/02 MF1PH4131DUF/02 [1] [2] FFC FFC FFC FFC Configuration Description Version EEPROM Cap. UID [1] SOT500-2 2k byte 17 pF 7-byte [1] SOT500-2 2k byte 17 pF 4-byte NUID [1] SOT500-2 4k byte 17 pF 7-byte [1] SOT500-2 4k byte 17 pF 4-byte NUID [1] SOT500-3 2k byte 17 pF 7-byte [1] SOT500-3 2k byte 17 pF 4-byte NUID [1] SOT500-3 4k byte 17 pF 7-byte [1] Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package SOT500-3 4k byte 17 pF 4-byte NUID 8-inch wafer (Sawn, 120 µm thickness) [2] - 2k byte 17 pF 7-byte 8-inch wafer (Sawn, 120 µm thickness) [2] - 2k byte 17 pF 4-byte NUID 8-inch wafer (Sawn, 120 µm thickness) [2] - 4k byte 17 pF 7-byte 8-inch wafer (Sawn, 120 µm thickness) [2] - 4k byte 17 pF 4-byte NUID 8-inch wafer (Sawn, 75 µm thickness) [2] - 2k byte 17 pF 7-byte 8-inch wafer (Sawn, 75 µm thickness) [2] - 2k byte 17 pF 4-byte NUID 8-inch wafer (Sawn, 75 µm thickness) [2] - 4k byte 17 pF 7-byte 8-inch wafer (Sawn, 75 µm thickness) [2] - 4k byte 17 pF 4-byte NUID [1] SOT500-2 2k byte 70 pF 7-byte [1] SOT500-2 2k byte 70 pF 4-byte NUID [1] SOT500-2 4k byte 70 pF 7-byte [1] SOT500-2 4k byte 70 pF 4-byte NUID [1] SOT500-3 2k byte 70 pF 7-byte [1] SOT500-3 2k byte 70 pF 4-byte NUID [1] SOT500-3 4k byte 70 pF 7-byte [1] Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package Plastic leadless module carrier package SOT500-2 4k byte 70 pF 4-byte NUID 8-inch wafer (Sawn, 120 µm thickness) [2] - 2k byte 70 pF 7-byte 8-inch wafer (Sawn, 120 µm thickness) [2] - 2k byte 70 pF 4-byte NUID 8-inch wafer (Sawn, 120 µm thickness) [2] - 4k byte 70 pF 7-byte 8-inch wafer (Sawn, 120 µm thickness) [2] - 4k byte 70 pF 4-byte NUID 8-inch wafer (Sawn, 75 µm thickness) [2] - 2k byte 70 pF 7-byte 8-inch wafer (Sawn, 75 µm thickness) [2] - 2k byte 70 pF 4-byte NUID 8-inch wafer (Sawn, 75 µm thickness) [2] - 4k byte 70 pF 7-byte 8-inch wafer (Sawn, 75 µm thickness) [2] - 4k byte 70 pF 4-byte NUID Plastic lead-less module carrier package; 35 mm wide tape 8-inch wafer (Sawn; on film frame carrier; electronic fail die marking according to SECS-II format), see Ref. 1 MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 4 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 6 Block diagram UART ISO/IEC 14443A RF INTERFACE AES CRYPTO CO-PROCESSOR TRUE RANDOM NUMBER GENERATOR CRYPTO1 SECURITY SENSORS POWER ON RESET CPU/LOGIC UNIT CRC VOLTAGE REGULATOR CLOCK INPUT FILTER ROM RESET GENERATOR RAM EEPROM 001aah389 Figure 1. Block diagram 7 Pinning information 7.1 Pinning LA top view LB 001aam200 Figure 2. Pin configuration of the contactless module (MOA4 and MOB6) 7.2 Pin description Table 3. Pin description (MOA4 and MOB6) MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC Symbol Pin Description LA LA antenna coil connection LA LB LB antenna coil connection LB All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 5 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8 Functional description 8.1 Memory organization The 4 kB EEPROM memory (MF1P(H)41y1) is organized in 32 sectors of 4 blocks and in 8 sectors of 16 blocks. The 2 kB EEPROM memory (MF1P(H)21y1) is organized in 32 sectors of 4 blocks. One block consists of 16 bytes. BYTE NUMBERS WITHIN A BLOCK SECTOR BLOCK 39 15 14 13 ... ... 2 1 0 0 1 2 3 4 CRYPTO1 key A 5(1) 6 7 8 9 access bytes 10 11 12 13 14 15 CRYPTO1 key B or data ... ... ... DESCRIPTION sector trailer 39 data data ... ... data data data ... ... ... 32 15 14 13 ... ... 2 1 0 CRYPTO1 key A access bytes CRYPTO1 key B or data sector trailer 32 data data ... ... data data data 31 3 2 1 0 CRYPTO1 key A access bytes CRYPTO1 key B or data sector trailer 31 data data data ... ... ... 0 ... ... ... 3 2 1 0 CRYPTO1 key A access bytes CRYPTO1 key B or data sector trailer 0 data data manufacturer data 001aaj843 1. CRYPTO1 key A in security level 0 and 1; plain text access byte in security level 3 Figure 3. Memory organization 8.1.1 Manufacturer block The first data block (block 0) of the first sector (sector 0) contains the PICC manufacturer data. This block is programmed and write protected during the production test. 8.1.2 Data blocks Sectors 0D to 31D contain 3 blocks each and sectors 32D to 39D contain 15 blocks for data storage. The data blocks can be configured using the access bits as: • read/write blocks for storing binary data • value blocks MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 6 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 Value blocks are special counters where the stored value can be manipulated with specific commands such as Increment, Decrement and Transfer. These value blocks have a fixed data format enabling error detection and correction with backup management to be performed. The MIFARE Plus EV1 in security level 3 provides two more commands which can be used to optimize performance when using value blocks. These are: • IncrementTransfer • DecrementTransfer A successful mutual authentication is required to allow any data operation. 8.1.2.1 Access conditions The access conditions for every data block and the sector trailer itself are stored in the sector trailer of the corresponding sector. The access bits control the rights of memory operations using the secret keys A and B. The access conditions may be altered after authentication with the relevant key and the current access condition allows this operation. Furthermore, value blocks are configured using the access bits. 8.1.3 AES keys AES keys are not shown in the memory map. The keys are stored in a separate memory section and can be updated and used by referencing the Key Number. Updates of AES keys as well as the update of the sector trailers is protected against tearing events. This anti-tearing mechanism is done by the PICC itself. The EEPROM stays in a defined status, even if the PICC is removed from the electromagnetic field during the write operation. 8.1.4 Originality function MIFARE Plus EV1 offers two features to prove genuineness of the IC. The first originality function is implemented by an AES authentication with the originality key and is backwards compatible to MIFARE Plus EV0. The authentication is performed in ISO/IEC 14443-4 protocol layer. The second asymmetric originality signature is based on ECC and only requires a public key for the verification. The verification itself is done on the infrastructure side. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 7 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.2 Virtual Card Architecture One of the trends expected is that mobile phones and other personal devices are used for making contactless transactions, in addition to the usage of traditional contactless cards (PICCs). In the case of mobile phones used for contactless operation, there needs to be multiapplication functionality of unrelated service providers and unrelated "Card Issuers" and a single mobile phone should work with multiple infrastructures. However, this multiapplication functionality is to be such that it is transparent to the various installations and that the mobile phone can be accessed like a normal contactless card. With the implemented Virtual Cards (VCs) concept, a Proximity Device (PD), e.g. the Secure Element in a mobile phone, can hold multiple VCs. With having multiple VCs in a single device there are several requirements: 1. It must be determined how the appropriate VC to use gets selected, in other words how a specific VC is to be presented at a given moment. 2. Privacy considerations need to be maintained. When a device can be freely interrogated about its UID, VC specific information (like implementation, file layout, ...) or even only to what installations the supported VCs belong, this data or the combination of a subset of it would make it possible to track a person from location to location. Furthermore, the combination of VCs could reveal a category of persons. 3. Performance and ease of use. The selection of the appropriate VC must be done fast, in order to increase transaction times only minimally. 4. Compliancy and portability to existing Card OSes supporting application selection methods on secure chip technologies, as defined by Java Card and GlobalPlatform. The Virtual Card Architecture as implemented on the MF1P(H)x1y1 has the following benefits: • Fast VC selection is possible by issuing a single ISOSelect command as defined by ISO/IEC 7816-4 • If Random ID is used, the UID can be retrieved in a very fast and secure way from the VC using ISOSelect and ISOExternalAuthenticate • Detect whether a VC belongs to certain installation and do so fast and privacy friendly • Proximity Check may also be enforced via a configuration, giving additionally protection against relay attacks • Exchange capabilities, e.g. a key-set version indication together with the fast retrieval of the UID. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 8 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.3 Proximity check The Proximity Check is used in conjunction with the Virtual Card Architecture, see Section 8.2. It can also be used afterwards. It allows the PCD to verify whether the PICC is within a certain physical proximity. MF1P(H)x1y1 enables ISO/IEC 7816-4 compliant Proximity Check by supporting wrapping of the native Proximity Check commands into ISO/IEC 7816-4 compliant APDUs, as outlined in Section 8.6.3. The SL3 and SL1 after ISO/IEC 14443-4 activation offers the Proximity Check function which protect the PICC from relay attacks by measurement of the round trip time of a challenge-response interaction. If an attacker wants to mount a relay attack, then he necessarily introduces delays. Depending on how large the delays are, they may be detected. The accuracy of the time measurement and the residual relay attack window that remains is dependent on the intrinsic latency of the PICC as well as of the implementation of the reader. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 9 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.4 AES Secure Messaging 8.4.1 AES security concept A MIFARE Plus transaction includes a set of operations from card activation, authentication to the reading and changing of data on the card. Each interaction with data on the card requires an authentication with the appropriate sector key. The result of such an authentication is called a session. MIFARE Plus EV1 supports two secure messaging modes: • EV0 secure messaging, which is fully backwards compatible with MIFARE Plus EV0. • EV1 secure messaging. The PCD can decide which mode to use. 8.4.2 Multi-sector authentication This feature is available in security level 3 for data which is spread over multiple sectors to improve transaction performance. Providing that such sectors are secured with identical keys (key value and key type) only a single authentication is required to read and/or write data from these sectors. There is no need to re-authenticate when accessing any data within these sectors. Therefore it is possible to configure a card in such a way that operating with only one authentication is needed in security level 3 to access all sectors. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 10 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.5 Transaction MAC The Transaction MAC feature helps preventing fraudulent merchant attacks. In example, it allows a merchant operating a point-of-sale terminal to prove that the transactions he executed with customers are genuine towards the back-end system. This is done by letting the card generate a Transaction MAC over the transaction with a key shared only by the card and the back-end system. The Transaction MAC feature can be activated block by block. Note that the pre-personalization of the card has to be done by the card issuer and not by the merchants provider. MAC generation also involves a Transaction MAC Counter maintained by the card, which allows the back-end system to detect replay attempts by the merchant. In addition, this counter allows the back-end system to detect missing transactions, which in turn allows detecting fraud where in example the merchant has increased the balance without reporting the transaction. Note that a counter also allows for easier detection mechanisms of replay than keeping logs with fingerprints of every transaction. As only fraud detection might not be sufficient if one cannot point to the fraudulent merchant, an additional configuration option allows the back-end to require that the merchant’s terminal commits its identity, called ReaderID, during the transaction. This requires support of a SAM which allows secure commit of its UID. The card supports linking ReaderIDs of merchants by storing the committed ReaderID and returning the ReaderID of the previous transaction. This way the back-end system can detect which merchant did not report missing transactions. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 11 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.6 Card activation and communication protocol The ISO/IEC 14443-3 anticollision mechanism allows for simultaneous handling of multiple PICCs in the field. The anticollision algorithm selects each PICC individually and ensures that execution of a transaction with a selected PICC is performed correctly without data corruption from other PICCs in the field. There are two different versions of the PICC. The UID is programmed into a locked part of the NV-memory reserved for the manufacturer: • unique 7-byte serial number • non-unique 4-byte serial number Due to security and system requirements, these bytes are write-protected after being programmed by the PICC manufacturer at production time. Remark: The programmed 4-byte NUID serial number is not globally unique which has to be considered in the contactless system design. See Ref. 14 for further information regarding handling of UIDs. The customer must decide which UID length to use when ordering the product, see Table 2 for ordering information. A MF1P(H)x1y1 with 7-byte UID supports the additional UID configuration options as defined in Ref. 3 using the MF_PersonalizeUIDUsage command after ISO/IEC 14443-3 activation. Note that the MF_PersonalizeUIDUsage command can only be sent once. During personalization, the PICC can be configured to support Random ID. The user can configure whether Random ID or fixed UID shall be used. According to ISO/IEC 14443-3 the first anticollision loop (see Ref. 7) returns the Random Number Tag 08h, the 3-byte Random Number and the BCC, if Random ID is used. In case Random ID is configured, the real UID can be retrieved using the ISOSelect and ISOExternalAuthenticate commands or by reading out block 0 of sector 0. 8.6.1 Backwards compatibility protocol The backwards compatibility of this product, as used in security level 1, runs on the same protocol layer as MIFARE Classic EV1 1K and MIFARE Classic EV1 4K. The protocol consists of the following components: • • • • Frame definition: according to ISO/IEC 14443-3 Bit encoding: according to ISO/IEC 14443-2 Error code handling: handling is proprietary as error codes are formatted in half bytes. Command specification: commands are proprietary. Please use the specification as in Ref. 3 and Ref. 4 and the additional commands which are only implemented in MIFARE Plus EV1 as described in this document and in Ref. 1. The following security levels can run on this protocol: • Security Level 0 • Security Level 1 8.6.2 ISO/IEC 14443-4 Protocol The ISO/IEC 14443-4 Protocol (also known as T=CL) is used in many processor cards. This protocol is used for the MIFARE Plus EV1 with the following security levels: • Security Level 0: all commands MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 12 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 • Security Level 1: for the sector or card level SL switch, the AES originality function, AES Key update, configuration data update, GetVersion and Read_Sig • Security Level 3: all commands Remark: The ISO/IEC 14443-4 protocol is also used to operate any sector that has been switched to SL3 or when operating a sector using SL3 commands which has been switched to SL1SL3Mix mode. 8.6.3 ISO/IEC 7816-4 Protocol MIFARE Plus EV1 supports the APDU message structure according to ISO/IEC 7816-4 for • an optional wrapping of the native APDU format for the additionally implemented standard ISO/IEC 7816-4 commands for Virtual Card selection MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 13 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.7 Security level switching The MIFARE Plus EV1 offers a unique feature to support migration from CRYPTO1 based systems to AES based operation. The migration on the card-side is done using different security levels supporting different cryptographic algorithms and protocols. There are three security levels: • Security level 0: initial delivery configuration, used for card personalization • Security level 1: 3-Pass CRYPTO1 Authentication (backwards compatibility mode with MIFARE Classic EV1 1K and MIFARE Classic EV1 4K) with optional AES authentication, optional 3-Pass AES Authentication and secure messaging. • Security level 3: 3-Pass authentication based on AES, new data manipulation commands secured by AES encryption and an AES based MACing method The security level switching (i.e. from security level 1 to security level 3) is performed using the dedicated AES authentication switching keys. Security level switching can be done for the whole card (CardSecurityLevel) or for dedicated sectors only (SectorSecurityLevel). In case of dedicated sectors, these can also be switched to a mixed mode SL1SL3Mix, where both security level 1 and security level 3 operations are accepted. Security level switching, both at card or at sector level, is only possible to a higher security level and not to a lower security level. 8.7.1 Switching CardSecurityLevel CardSecurityLevel switching of MF1P(H)x1y1 means that the whole PICC is switching its security level at once. This is also the method available in MIFARE Plus EV0 and is done by an AES authentication with the L3SwitchKey. The product is delivered in SL0. It is possible to upgrade the PICC to security level 3 either passing through the security level 1 or directly from security level 0. 8.7.2 Switching SectorSecurityLevel Switching the Security Level of dedicated MIFARE Sectors is done by a multiple key AES authentication, called AuthenticateSectorSwitch, addressing the L3SectorSwitchKey or L1L3MixSectorSwitchKey, and the AESSectorKeyB of the targeted sectors. This command is only available after ISO/IEC 14443-4 activation in security level 1. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 14 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.8 Security level 0 Security level 0 is the initial delivery configuration of the PICC. The card can be operated either using the backwards compatibility protocol or the ISO/IEC 14443-4 protocol. In this level, the card can be personalized including the programming of user data as well as CRYPTO1 and/or AES keys. In addition, the originality function can be used. The following mandatory AES keys must be written, using the WritePerso command before the PICC can be switched to security level 1 or security level 3. Security level switching is performed using the CommitPerso command: • CardConfigurationKey • CardMasterKey • L3SwitchKey When the pre-personalization of the PICC is finished it is possible to upgrade the PICC from security level 0 either to security level 1 or directly to security level 3 with CommitPerso command. Using the originality function, it is possible to verify that the chip is a genuine NXP Semiconductors MIFARE Plus. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 15 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.9 Security level 1 Security level 1 offers the same functionality as a MIFARE Classic EV1 1K and MIFARE Classic EV1 4K using the backwards compatibility protocol, see Ref. 3 and Ref. 4. Furthermore, an optional AES authentication is available in this level without affecting the MIFARE Classic EV1 1K and MIFARE Classic EV1 4K functionality. The authenticity of the card can be proven using strong cryptographic means with this additional functionality. Response timings may differ from the MIFARE Classic EV1 1K/4K products. In addition to the backwards compatibility mode, after a successful ISO/IEC 14443-4 activation the originality function can be executed or the CardSecurityLevel or SectorSecurityLevel switched to higher security levels. In addition to those features already available in MIFARE Plus EV0, MIFARE Plus EV1 offers the possibility to update AESSectorKeys and VCSystemData. MIFARE Plus EV1 can be operated like MIFARE Plus EV0 in SL1 which means that all memory operations on each sector are requiring legacy MIFARE Classic EV1 commands using CRYPTO1 enciphering. Beyond that, MIFARE Plus EV1 offers the flexibility to either switch distinct sectors to SL3 and operate them in AES secure messaging or enable SL1SL3MixMode on distinct sectors. Sectors in SL1SL3MixMode can be operated either using the backwards compatible MIFARE Classic EV1 commands when activated to ISO/IEC 14443-3 or using AES secure messaging when activated to ISO/ IEC 14443-4. In example, this enables end-to-end communication to a MIFARE Plus EV1 using a secure AES channel while leaving the operation in the application on MIFARE Classic EV1 commands for a migration period. Also, the Transaction MAC feature is available in security level 1 after ISO/IEC14443-3 activation. The Transaction MAC processing in security level 1 of the Authentication, Read, Write, Increment, Decrement, Transfer and Restore commands is the same as their security level 3 equivalents with a few differences, as described later and in Ref. 1. The CommitReaderID command is not supported. Using the originality function it is possible to verify if the chip is a genuine NXP Semiconductors MIFARE Plus EV1. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 16 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 8.10 Security level 3 The operation in security level 3 is solely based on the ISO/IEC 14443-4 protocol layer. The usage of the backwards compatibility protocol is not possible. In security level 3, a mandatory AES authentication between PICC and reader is conducted, where two keys are generated as a function of the random numbers from the PICC and the reader as well as of the shared key. These two session keys are used to secure the data which is exchanged on the interface between the card and reader. One of the two keys is used to ensure the confidentiality of the command and the response while the other key ensures the integrity of the command and the response. MIFARE Plus EV1 features the secure messaging from its predecessor MIFARE Plus EV0 and it offers the possibility to choose the newly introduced EV1 secure messaging. On First Authenticate, the PCD can use the PCD capability bytes to chose between MIFARE Plus EV0 and MIFARE Plus EV1 secure messaging. The reader can decide which security needs to be used in the communication between PICC and reader. In the simplest case, all commands are secured by a MAC, such that the PICC will only accept commands from the authenticated reader. Any message tampering is detected by verifying the MAC. All responses are appended by a MAC to prove to the reader that neither the command nor the response have been compromised. If performance is the highest priority, the card can be configured to omit the MAC for read commands. The card then accepts read commands without knowing whether they are authentic. However, there is a mechanism to prove to the reader that the read response is resulting from the unmodified read command that it sent. Other commands, like write commands, always need to have a MAC appended to ensure that no memory changes are carried out without proving the authenticity of the command. The reader can decide for each command whether a MAC is included in the response. When the appropriate MAC is received, due to linked MACs the reader knows that the command and commands before it were properly executed. All commands between two consecutive First Authenticate commands belong to one transaction and the MACing mechanism assures integrity of the whole transaction. If the MAC on read responses is omitted, the integrity of all read responses within one session can still be verified by including a MAC on one read response before issuing the next First or Following Authenticate command. To balance performance and confidentiality of the transaction, each data block in a sector can be configured to allow or disallow sending/receiving plain data. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 17 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 9 Look-up tables 9.1 Security level 0, 1, 2, 3: ISO/IEC 14443-3 Table 4. ISO/IEC 14443-3 Command Description REQA the REQA and ATQA commands are fully implemented according to ISO/IEC 14443-3 WUPA the WAKE-UP command is fully implemented according to ISO/IEC 14443-3 ANTICOLLISION/SELECT the ANTICOLLISION and SELECT commands are fully implemented cascade level 1 according to ISO/IEC 14443-3. The response is part 1 of the UID. ANTICOLLISION/SELECT the ANTICOLLISION and SELECT commands are fully implemented cascade level 2 for 7 byte according to ISO/IEC 14443-3. The response is part 2 of the UID. UID version HALT MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC the HALT command is fully implemented according to ISO/IEC 14443-3 All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 18 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 9.2 Security level 0, 1, 2, 3: ISO/IEC 14443-4 Table 5. ISO/IEC 14443-4 Command Description RATS the response to the RATS command identifies the PICC type to the PCD. PPS the PPS command allows individual selection of the communication baud rate between PCD and PICC. It is possible for MF1PLUSx0 to individually set the communication baud rate independently for both directions. DESELECT deselection according to ISO/IEC 14443-4. Please find more information on ISO/IEC 14443-3 in Ref. 7 as well as on the settings of ATQA, SAK and ATS in Ref. 6. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 19 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 9.3 SL0 command overview Table 6. SL0 command overview Command Description Commands available after ISO/IEC 14443-3 activation Read_Sig Retrieve the ECC originality check signature. WritePerso pre Personalization of AES Keys and all blocks CommitPerso switch to SL1 or SL3 AuthenticateFirst (part 1) first authenticate AuthenticateNonFirst (part 1) following authenticate AuthenticateContinue (part 2) second authentication step VCSupportLastISOL3 check if the Virtual Card Concept is supported, communicate PCD capabilities and retrieve the UID Commands available after ISO/IEC 14443-4 activation GetVersion returns manufacturing related data of the PICC Read_Sig Retrieve the ECC originality check signature. WritePerso pre Personalization of AES Keys and all blocks CommitPerso switch to SL1 or SL3 AuthenticateFirst (part 1) first authenticate AuthenticateNonFirst (part 1) following authenticate AuthenticateContinue (part 2) second authentication step VC commands available after ISO/IEC 14443-4 activation, using ISO/IEC 7816-4 protocol ISOSelect MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC Select virtual card All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 20 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 9.4 SL1 command overview Table 7. SL1 command overview Command Description MIFARE Classic commands MF Authenticate KeyA authentication with KeyA MF Authenticate KeyB authentication with KeyB MF Read reading data MF Write writing data MF Increment incrementing a value MF Decrement decrementing a value MF Restore restoring a value MF Transfer transferring a value Commands using backwards compatibility protocol, see Section 8.6.1 Read_Sig Retrieve the ECC originality check signature. SetConfigSL1 used to change MIFARE Plus EV1 specific configuration data. MF_PersonalizeUIDUsage Personalize UID Usage as described in Ref. 3 AuthenticateFirst (part 1) first authenticate, protocol used as described in Section 8.6.1 AuthenticateNonFirst (part 1) following authenticate, protocol used as described in Section 8.6.1 AuthenticateContinue (part 2) second authentication step, protocol used as described in Section 8.6.1 ReadPlainNoMAC_UnMACed reading in plain, no MAC on response, no MAC on command VCSupportLastISOL3 check if the Virtual Card Concept is supported, communicate PCD capabilities and retrieve the UID [1] Authentication commands available after ISO/IEC 14443-4 activation GetVersion returns manufacturing related data of the PICC Read_Sig Retrieve the ECC originality check signature. AuthenticateFirst (part 1) first authenticate AuthenticateNonFirst (part 1) following authenticate AuthenticateSectorSwitch (part 1) used to switch single sectors to SL3 AuthenticateContinue (part 2) second authentication step ResetAuth reset the authentication [2] Memory commands available after ISO/IEC 14443-4 activation MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC WriteEncryptedNoMAC writing encrypted, no MAC on response, MAC on command WriteEncryptedMAC writing encrypted, MAC on response, MAC on command All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 21 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 Command Description Proximity check commands available after ISO/IEC 14443-4 activation PreparePC prepare for the Proximity Check ProximityCheck perform the precise measurement for the proximity check VerifyPC verify the proximity check VC commands available after ISO/IEC 14443-4 activation, using ISO/IEC 7816-4 protocol ISOSelect Select virtual card ISOExternalAuthenticate Authenticate PD [1] [2] For security level switch, the originality function, sector security level switch and updating of AES keys and VCSystemData blocks For updating of AES keys and VCSystemData blocks In addition to the commands listed in Table 7, all commands defined for SL3 communication are available for those sectors which have been switch to SL3 or SL1SL3Mix mode using the AuthenticateSectorSwitch feature. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 22 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 9.5 SL3 command overview Table 8. SL3 command overview Command Description MIFARE Plus commands GetVersion returns manufacturing related data of the PICC Read_Sig Retrieve the ECC originality check signature. AuthenticateFirst (part 1) first authenticate AuthenticateNonFirst (part 1) following Authenticate AuthenticateContinue (part 2) second authentication step ResetAuth reset the authentication Additional Frame proceed to next response frame in GetVersion READ commands ReadEncryptedNoMAC_MACed reading encrypted, no MAC on response, MAC on command ReadEncryptedMAC_MACed reading encrypted, MAC on response, MAC on command ReadPlainNoMAC_MACed reading in plain, no MAC on response, MAC on command ReadPlainMAC_MACed reading in plain, MAC on response, MAC on command ReadEncryptedNoMAC_UnMACed reading encrypted, no MAC on response, no MAC on command ReadEncryptedMAC_UnMACed reading encrypted, MAC on response, no MAC on command ReadPlainNoMAC_UnMACed reading in plain, no MAC on response, no MAC on command ReadPlainMAC_UnMACed reading in plain, MAC on response, no MAC on command WRITE commands WriteEncryptedNoMAC writing encrypted, no MAC on response, MAC on command WriteEncryptedMAC writing encrypted, MAC on response, MAC on command WritePlainNoMAC writing in plain, no MAC on response, MAC on command WritePlainMAC writing in plain, MAC on response, MAC on command VALUE operations IncrementNoMAC MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC incrementing a value encrypted, no MAC on response, MAC on command All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 23 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 Command Description IncrementMAC incrementing a value encrypted, MAC on response, MAC on command DecrementNoMAC decrementing a value encrypted, no MAC on response, MAC on command DecrementMAC decrementing a value encrypted, MAC on response, MAC on command TransferNoMAC transferring a value, no MAC on response, MAC on command TransferMAC transferring a value, MAC on response, MAC on command IncrementTransferNoMAC combined incrementing and transferring a value encrypted, no MAC on response, MAC on command IncrementTransferMAC combined incrementing and transferring a value encrypted, MAC on response, MAC on command DecrementTransferNoMAC combined decrementing and transferring a value encrypted, no MAC on response, MAC on command DecrementTransferMAC combined decrementing and transferring a value encrypted, MAC on response, MAC on command RestoreNoMAC restoring a value, no MAC on response, MAC on command RestoreMAC restoring a value, MAC on response, MAC on command Proximity check commands PreparePC prepare for the Proximity Check ProximityCheck perform the precise measurement for the proximity check VerifyPC verify the proximity check VC commands using ISO/IEC 7816-4 protocol ISOSelect Select virtual card ISOExternalAuthenticate Authenticate PD Transaction MAC commands CommitReaderID MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC commit reader ID for Transaction MAC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 24 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 10 Limiting values Stresses above one or more of the limiting values may cause permanent damage to the device. Exposure to limiting values for extended periods may affect device reliability. Table 9. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Min Max Unit II input current - 50 mA Ptot/pack total power dissipation per package - 200 mW Tstg storage temperature -55 125 °C Tamb ambient temperature -25 70 °C - 2 kV VESD [1] electrostatic discharge voltage on LA/LB [1] ANSI/ESDA/JEDEC JS-001; Human body model CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling electrostatic sensitive devices. Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or equivalent standards. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 25 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 11 Abbreviations Table 10. Abbreviations MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC Acronym Description AES Advanced Encryption Standard APDU Application Protocol Data Unit ATQA Answer To reQuest ATS Answer To Select BCC Bit Count Check EEPROM Electrically Erasable Programmable Read-Only Memory LCR L = inductance, Capacitance, Resistance (LCR meter) MAC Message Authentication Code NUID Non-Unique IDentifier NV Non-Volatile memory PCD Proximity Coupling Device (Contactless Reader) PICC Proximity Integrated Circuit Card (Contactless Card) PPS Protocol Parameter Selection RATS Request Answer To Select REQA REQuest Answer SAK Select AcKnowledge, type A SECS-II SEMI Equipment Communications Standard part 2 SEMI Semiconductors Equipment and Materials International SL Security level UID Unique IDentifier VC Virtual Card, one MIFARE Plus PICC is one virtual card WUPA Wake Up Protocol A All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 26 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 12 References [1] MIFARE Plus EV1 2 Data sheet, Doc. No. 3226** [2] MF1P(H)x1y1 Wafer specification Data sheet addendum, Doc. No. 3441** [3] MIFARE Classic EV1 1K Data sheet, Doc. No. 2792** [4] MIFARE Classic EV1 4K Data sheet, Doc. No. 2794** [5] AN10787 MIFARE Application Directory (MAD) Application note, Doc. No. 0018** [6] MIFARE Type identification procedure Application note, Doc. No. 1843** [7] ISO/IEC 14443 PICC selection Application note, Doc. No. 1308** [8] ISO/IEC 7816-4:2005 Identification cards – Integrated circuit cards – Part 4: Organization, security and commands for interchange. January 2005. [9] NIST Special Publication 800-38A Recommendation for block cipher modes of operation: methods and techniques, 2001. [10] NIST Special Publication 800-38B Recommendation for block cipher modes of operation: The CMAC mode for authentication. 2 ** ... document version number MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 27 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 [11] ISO/IEC 14443 Standard Identification cards - contactless integrated circuit cards - proximity cards. [12] Recommendation for block cipher modes of operation: methods and techniques FIPS PUB 197 ADVANCED ENCRYPTION STANDARD. [13] ISO/IEC 9797-1 Standard Information technology - security techniques - Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher. [14] MIFARE and handling of UIDs Application note, Doc. No. 1907** MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 28 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 13 Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes MF1P(H)x1y1 v.3.2 20181206 Product short data sheet - Modifications: • Editorial update • Updated to rev. 3.2 to comply with the full data sheet MF1P(H)x1y1 v.3.0 20180723 Modifications: • Table 2: updated MF1P(H)x1y1 v.2.0 20160414 MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC Product short data sheet - Preliminary short data sheet - All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 MF1P(H)x1y1 v.3.0 MF1P(H)x1y1 v.2.0 - © NXP B.V. 2019. All rights reserved. 29 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 14 Legal information 14.1 Data sheet status Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] [2] [3] Please consult the most recently issued document before initiating or completing a design. The term 'short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. notice. This document supersedes and replaces all information supplied prior to the publication hereof. 14.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 14.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 30 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of nonautomotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 14.4 Licenses ICs with DPA Countermeasures functionality NXP ICs containing functionality implementing countermeasures to Differential Power Analysis and Simple Power Analysis are produced and sold under applicable license from Cryptography Research, Inc. 14.5 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. MIFARE — is a trademark of NXP B.V. MIFARE Plus — is a trademark of NXP B.V. MIFARE Classic — is a trademark of NXP B.V. All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 31 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 Tables Tab. 1. Tab. 2. Tab. 3. Tab. 4. Tab. 5. Tab. 6. Quick reference data .........................................3 Ordering information ..........................................4 Pin description (MOA4 and MOB6) ................... 5 ISO/IEC 14443-3 ............................................. 18 ISO/IEC 14443-4 ............................................. 19 SL0 command overview ..................................20 Tab. 7. Tab. 8. Tab. 9. Tab. 10. Tab. 11. SL1 command overview ..................................21 SL3 command overview ..................................23 Limiting values ................................................ 25 Abbreviations ...................................................26 Revision history ...............................................29 Fig. 3. Memory organization .........................................6 Figures Fig. 1. Fig. 2. Block diagram ................................................... 5 Pin configuration of the contactless module (MOA4 and MOB6) ........................................... 5 MF1P(H)x1y1 Product short data sheet COMPANY PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 3.2 — 6 December 2018 366932 © NXP B.V. 2019. All rights reserved. 32 / 33 MF1P(H)x1y1 NXP Semiconductors MIFARE Plus EV1 Contents 1 2 3 4 5 6 7 7.1 7.2 8 8.1 8.1.1 8.1.2 8.1.2.1 8.1.3 8.1.4 8.2 8.3 8.4 8.4.1 8.4.2 8.5 8.6 8.6.1 8.6.2 8.6.3 8.7 8.7.1 8.7.2 8.8 8.9 8.10 9 9.1 9.2 9.3 9.4 9.5 10 11 12 13 14 General description ............................................ 1 Features and benefits .........................................2 Applications .........................................................2 Quick reference data .......................................... 3 Ordering information .......................................... 4 Block diagram ..................................................... 5 Pinning information ............................................ 5 Pinning ............................................................... 5 Pin description ................................................... 5 Functional description ........................................6 Memory organization ......................................... 6 Manufacturer block ............................................ 6 Data blocks ........................................................6 Access conditions .............................................. 7 AES keys ........................................................... 7 Originality function ............................................. 7 Virtual Card Architecture ................................... 8 Proximity check ................................................. 9 AES Secure Messaging ...................................10 AES security concept ...................................... 10 Multi-sector authentication ............................... 10 Transaction MAC ............................................. 11 Card activation and communication protocol ... 12 Backwards compatibility protocol .....................12 ISO/IEC 14443-4 Protocol ............................... 12 ISO/IEC 7816-4 Protocol ................................. 13 Security level switching ................................... 14 Switching CardSecurityLevel ........................... 14 Switching SectorSecurityLevel .........................14 Security level 0 ................................................ 15 Security level 1 ................................................ 16 Security level 3 ................................................ 17 Look-up tables .................................................. 18 Security level 0, 1, 2, 3: ISO/IEC 14443-3 ....... 18 Security level 0, 1, 2, 3: ISO/IEC 14443-4 ....... 19 SL0 command overview .................................. 20 SL1 command overview .................................. 21 SL3 command overview .................................. 23 Limiting values .................................................. 25 Abbreviations .................................................... 26 References ......................................................... 27 Revision history ................................................ 29 Legal information .............................................. 30 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © NXP B.V. 2019. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 6 December 2018 Document identifier: MF1P(H)x1y1 Document number: 366932