OM13076UL

OM13076 Product Brief LPCXpresso18S37 Development Board Rev. 1.0 — 19th January 2015 The LPCXpresso family of boards provides a powerful and flexible development system for NXP's Cortex-M MCUs. The LPCXpresso18S37 board has been developed by NXP to enable evaluation of and prototyping with the LPC4300 family of MCUs, and features the LPC18S37 in its 100 PIN BGA package option. Feature summary The LPCXpresso18S37 board includes the following features:  LPC18S37 MCU running at up to 180MHz  On-board high-speed USB based debug probe with CMSIS-DAP and LPCXpresso IDE Redlink protocol options, can debug the on-board LPC18S37 or external target  Support for external debug probes  Tri-color LED  Target Reset, ISP and WAKE buttons  Expansion options based on Arduino UNO R3 and Pmod™, plus additional expansion port pins  On-board Ethernet PHY (output available at expansion connectors)  High speed USB A/B connector for host or slave operation  8Mb Macronix quad SPI flash  UART, I2C and SPI port bridging from LPC18S37 target to USB via the on-board debug probe  FTDI UART connector  A7001CM Secure Element LPCXpresso IDE LPCXpresso IDE supports programming and debugging LPCXpresso boards using the on-board CMSISDAP debug interface, or with an external debug probe such as LPC-Link2. LPCXpresso18S37 is ready for use with the LPCXpresso IDE. An external debug probe can be used by simply connecting it to the board via the P1 connector and powering the board via the J3 USB connection. © NXP B.V. 2015. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com OM13076 Product Brief LPCXpresso18S37 Development Board Rev. 1.0 — 19th January 2015 Partner development tools The LPCXpresso18S37 board can be used with development tools from NXP partners including Atollic, Keil, IAR, Rowley and SEGGER. The board is pre-programmed with CMSIS-DAP firmware, so can also be used with these tool-chains by setting the on-board debug probe to boot from flash (removing the JP3 jumper). Please refer to our partners for details on using their tools with the board. LPCOpen drivers and examples LPCOpen software packages allow users to quickly and easily utilize NXP's extensive array of microcontroller software libraries to create and develop multifunctional products. Drivers for the LPCXpresso18S37 board can be downloaded for free at http://www.lpcware.com/lpcopen. Board specifications Recommended operating conditions: 0 to 70oC ambient Weight: 1.1 ounces Size: 123 x 59mm (4.8 x 2.3 inches) including connectors The LPCXpresso18S37 board is RoHS compliant. © NXP B.V. 2015. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com OM13076 Flyer NXP Semiconductors Please be aware that important notices concerning this document and the product(s) described herein, have been included in the section 'Legal information'. © NXP B.V. 2015. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 19th January 2015