OV07710-F48V

OV7710 VGA product brief high-performance, all-digital automotive solution available in a lead-free package The OV7710 image sensor is a high performance 1/4-inch, single-chip VGA digital video camera designed specifically for automotive applications. It excels in low light conditions and can operate within a wide temperature range from -40° to 105°C. The sensor meets all automotive market requirements in terms of performance, quality and reliability. The OV7710 has a 656 x 492 image array capable of operating at up to 30 frames per second (fps). It also incorporates de-noise algorithms to cancel Fixed Pattern Noise (FPN), eliminate smearing, and reduce blooming. The OV7710 possesses all required camera functions including exposure control, gain, white balance, windowing and more, which are programmable through the Serial Camera Control Bus (SCCB) interface. Other key features of the OV7710 image sensor are its low power consumption, progressive scanning, external frame sync (Genlock) capability and support for both 10-bit raw data or 8-bit YUV/RGB outputs. It has completed all required AEC-Q100 Grade 2 qualifications. applications airbag deployment rear view lane departure warning blind spot view night vision adaptive cruise control OV7710 ordering information OV07710-F48V OV07211-F48V (color, QFP2-48) (b&w with microlens, QFP2-48) product features OmniPixel2™ technology single chip 1/4" VGA sensor high sensitivity for low-light operation master/slave compatible serial camera control bus (SCCB) control interface for register programming low fixed pattern noise, anti-blooming, zero smearing horizontal mirroring and vertical flipping progressive scan white balance, exposure time, gain control, etc. low power consumption external frame sync capability (Genlock) SPI for overlay control dual static overlay control AEC-Q100 Grade 2 qualified product specifications array size: 656 x 492 power supply: – core: 1.8VDC± 5% – analog: 3.3VDC ± 10% – I/O: 2.4 to 3.3 VDC sensitivity – color: 3.0 V/(Lux-sec) – b&w: 7.1 V/(Lux-sec) minimum illumination (3000K): 0.04 Lux @ f/1.2 S/N ratio: 50 dB dynamic range: 60 dB electronic exposure: up to 521:1 (for selected fps) pixel size: 6.0 μm x 6.0 μm dark current: 10 mV/sec at 60°C well capacity: 26 Ke fixed pattern noise: < 0.03% of VPEAK-TO-PEAK image area: 4.080 mm x 3.102 mm package dimensions: 12.00 mm x 12.00 mm power requirements: – active: 140 mW typical (30 fps VGA, YUV) – standby: 10 μA typical temperature range: -40°C to 105°C output format: – 10-bit raw data – 8-bit YUV/RGB optical format: 1/4" max image transfer rate: – VGA (640x480): 30 fps – QVGA (320x240): 60 fps functional block diagram OV7710 analog processing gain BLC R G B MUX A/D MUX A/D SPI interface CS SCK ESO ESI overlay row select output formatter control registers (to all circuits) digital video (DV) port D [9:0] VREF timing generator SCCB interface SCCB master 1.0μF image array column sense amps SIO_C SIO_D XCLK1 HREF PCLK VS RESET PWDN MSCL MSDA OV7710_PB_001 4275 Burton Drive Santa Clara, CA, 95054 tel: +1 408 567 3000 fax: +1 408 567 3001 www.ovt.com OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and OmniPixel are registered trademarks of OmniVision Technologies, Inc. The OmniVision logo, CameraChip and OmniPixel2 are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. version 1.3, September 2008