H5F-FB

Digital Daily Time Switch H5F CSM_H5F_DS_E_3_4 Daily Time Control with Simple Operations PS E • Specify the operation days. (However, you can set only one pattern of operation days and specified days.) • Up to 12 ON/OFF operations (24 for pulse-output operation). • Special holidays can be handled easily with the holiday setting function. • Adjustments for sudden schedule changes can be made easily using output override and automatic return operation. • The operation program can be checked easily with the program check function. • Enables pulse output operation and summer time setting. • Incorporates finger-safe terminals. • Conforms to UL, CSA, and CE marking. • Meets a variety of mounting requirements: flush mounting, surface mounting, and DIN track mounting. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Model Number Structure ■ Model Number Legend H5F-@B 1 2 1. Mounting method None: Flush mounting F: Surface mounting K: Surface mounting/track mounting 2. Language B: English Ordering Information ■ List of Models Wiring Screw terminals Mounting method Model Flush mounting H5F-B Surface mounting H5F-FB Surface mounting/track mounting H5F-KB ■ Accessories (Order Separately) Name Soft cover Hard cover For H5F-B Y92A-48 For H5F-FB/-KB Y92A-48E (See note 1.) Flush Mounting Adapter (See note 2.) Mounting Track Models Y92A-48F1 Y92F-30 50 cm (l) × 7.3 mm (t) PFP-50N 1 m (l) × 7.3 mm (t) PFP-100N 1 m (l) × 16 mm (t) PFP-100N2 End Plate PFP-M Spacer PFP-S Note: 1. Supplied with H5F-KB model. 2. Supplied with H5F-B (flush-mounting) model. 1 H5F Specifications ■ Ratings Rated supply voltage 100 to 240 VAC (50/60 Hz) Operating voltage range 85% to 110% of rated supply voltage Power consumption Approx. 2.4 VA at 264 VAC Control outputs Contact output: SPST-NO, 15 A at 250 VAC, resistive load, 10 A at 24 VDC, resistive load Minimum applied load: 100 mA at 5 VDC (failure level: P, reference value) NEMA A300 Pilot Duty, 1/3 HP at 120 VAC External connections Screw terminals (M3.5 screw) Terminal screw tightening torque 0.98 to 1.17 N · m ■ Characteristics Accuracy of operating time ±0.01% ±0.05 s max. (see note 1) Setting error Influence of voltage Influence of temperature Influence of EMS. (at EN61326-1) Time accuracy ±15 s per month (at 25°C) Memory protection Continuous use: 5 years min. (at 25°C); Power-interruption rate of 50%: 10 years min. (at 25°C) (see note 2) (lithium battery) Insulation resistance 100 MΩ min. (between current-carrying terminals and exposed non-current-carrying metal parts, between operating power supply circuit and control output circuit and between non-continuous contacts) Dielectric strength 2,000 VAC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-current-carrying metal parts and between operating power supply circuit and control output circuit) 1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts) Noise immunity 1.5 kV (between power terminals) Square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise) Vibration resistance Destruction:10 to 55 Hz with 0.375-mm single amplitude, four cycles each in three directions (8 minutes per cycle) Malfunction:10 to 55 Hz with 0.25-mm single amplitude for 10 minutes each in three directions Shock resistance Destruction:300 m/s2 3 times each in 6 directions Malfunction:100 m/s2 3 times each in 6 directions Ambient temperature Operating:–10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Ambient humidity Operating: 35% to 85% Life expectancy Mechanical (at 20°C): 100,000 operations min. Electrical (at 20°C): 50,000 operations min. (15 A, 250 VAC, resistive load) 50,000 operations min. (1 HP, 250 VAC, motor load) 50,000 operations min. (10 A, 250 VAC, inductive load (cosφ = 0.7)) 50,000 operations min. (100 W, 100 VAC, lamp load) 10,000 operations min. (300 W, 100 VAC, lamp load) Approved safety standards UL508/Listing, CSA C22.2 No. 14, conforms to EN61010-1 (Pollution degree 2/overvoltage category II) Conforms to VDE0106/P100 (finger protection). Conforms to Electrical Appliance and Material Safety Law (for Japan) EMC (EMI) Emission Enclosure: Emission AC mains: (EMS) Immunity ESD: Immunity RF-interference: Immunity Conducted Disturbance: Immunity Burst: Immunity Surge: Immunity Voltage Dip/Interruption: Immunity Magnetic Power Field: EN61326-1 (See note 3.) EN55011 Group 1 class A EN55011 Group 1 class A EN61326-1 (See note 3.) EN61000-4-2: 4 kV contact discharge (level 2) 8 kV air discharge (level 3) EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz, 1.4 to 2 GHz) (level 3) EN61000-4-6: EN61000-4-4: 10 V (0.15 to 80 MHz) (according to EN61000-6-2) 2 kV power-line (level 3) 1 kV I/O signal-line (level 4) EN61000-4-5: 1 kV line to lines (power and output lines) (level 2); 2 kV line to ground (power and output lines) (level 3) EN61000-4-11: 0.5 cycle, 100% (rated voltage) EN61000-4-8: 30 A/m Case color Light gray (Munsell 5Y7/1) Weight H5F-B: approx. 115 g; H5F-KB: approx. 160 g; H5F-FB: approx. 130 g Note: 1. The total error including the repeat accuracy, setting error, variation due to voltage change, and variation due to temperature change is ±0.01%±0.05 s max. ±0.01% also indicates an error in the time interval of a set time. 2. The total time when power is not being supplied. 3. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2) 2 H5F Connections ■ Terminal Arrangement Flush Mounting Models Surface Mounting Models Surface Mounting/Track Mounting Models H5F-B H5F-FB H5F-KB (Front View) (Front View) (Rear View) Power source 100 to 240 VAC H5F TIME SWITCH SU MO TU WE TH PM OUT POWER OUT ON PW TMR/ P FR SA 3 00 PM MODE H5F TIME SWITCH SU MO TU WE TH 5 00 h m/ P WD WRITE ON AUTO CLR SELECT d +1h HOLIDAY TEST PM OFF OUT POWER OUT ON PW FR SA 3 00 PM 5 00 MODE h m/ P WD CLR SELECT d WRITE +1h HOLIDAY TEST TMR/ P ON AUTO OFF Load Power supply of load Load Power source 100 to 240 VAC Power supply of load Load Power source 100 to 240 VAC Note: 1. 2. 3. 4. 5. Power supply of load The Time Switch uses M3.5 terminals. The Time Switch output is no-voltage contact output. An external power supply is required to drive the load. Applicable wire: 600-V vinyl-insulated wire (solid wire or twisted wire, copper), 14 to 24 AWG, 2 wires max. per terminal. Applicable tightening torque: 0.98 to 1.17 N·m. Recommended fuse: T2A, 250 VAC, time delay, low breaking capacity. Operation ■ Operation Operation method Digital quartz Time range 24 h × 7 days (Operation days can be specified.) Operation 1. Daily operation (Multiple-day operation possible.) 2. Pulse-output operation (Pulse width can be set in units of 1 s from 1 to 59 s and in units of 1 min from 1 to 60 min.) 3. Partial operation on specified day (One or some of the operations for certain days can also be executed on other days.) 4. Forced ON/OFF operation 5. Holiday operation 6. Output override and automatic return operation Display 1. Day, hours (12-hour (am/pm) or 24-hour clock), minutes (0:00 to 11:59 a.m./ 0:00 to 11:59 p.m., 0:00 to 23:59) 2. Digital display by LCD. Character height: 8 mm 3. Digital display of present time and time schedules for operation 4. Timing chart display of present time and time schedules for operation Other functions Program check function, summer time function Number of circuits 1 independent circuit Minimum setting unit 1 min Minimum set interval 1 min Number of operations that can be set 24 (see note) Note: Up to 12 ON/OFF operations are possible per day. (For pulse-output operation, the number is 24.) 3 H5F ■ Operation Functions Timer operation (ON/OFF operation) ON time OFF time Pulse-output operation Pulse width ON time Controls the output according to preset of ON and OFF times • Minimum setting unit: 1 min • Up to 12 ON/OFF operations are possible per day. Multiple-day operation example ON time : 20:00 OFF time: 10:30 (following day) Output turns ON for a fixed period (pulse width) at the set time. • Pulse width: 1 to 59 s, or 1 to 60 min. (The same pulse width setting is used for all types of output operation.) • The pulse width can be set in units of 1 s or 1 min. • Up to 24 pulse-output operations are possible per day. Forced ON/OFF operation Forcibly turns ON/OFF the output by the output ON/OFF switch. Override and automatic return operation Using the output ON/OFF switch and the Write Key, control output is held in the ON state until the next OFF time. • It is also possible to hold the control output in the OFF state until the next ON time. • Operation after the output turns OFF (or ON) will be based on the regular program. • This function can be used with pulse-output operation. Regular program Output operation Start of override and automatic return operation Partial operation on specified day Program 1 Program 2 (special) Regular program Operation on operation day Select the day of the week to execute some or all of the operations set for the operation day. (Convenient, for example, for executing a half-day operation on Saturday.) • All programs run on operation days. • Only programs specified to run on a specified day will run. • Only one pattern of specified days can be set. Operation on specified day Example with Program 1 only for specified day Holiday setting Operation on Operation operation day on holiday Regular program Operation in present week It is possible to set a day in the present week as a holiday (i.e., a non-operation day: output OFF regardless of the settings). When that day has passed, operation will continue according to the regular program, and operation will be executed as normal on that day from the following week • This function can be used with pulse-output operation. Operation from next week Note: Both the timer operation and the pulse-output operation cannot be programmed together. ■ Operation When Power Turns OFF 1. The time and settings are backed up using a lithium battery. 2. The display stays ON but the output turns OFF. 3. Settings for all types of operation except override and automatic return operation are possible. 4 H5F Nomenclature Front Panel (Actual Size) H5F TIME SWITCH SU MO TU WE TH FR SA A Mode Key OUT I TMR/ P Key POWER OUT B h Key MODE h m/ P WD CLR SELECT d WRITE +1h HOLIDAY TEST TMR/ P C m/ P WD Key ON H Output ON/OFF Switch AUTO OFF E d/Test Key G CLR/+1h Key No. D Write Key F Select/Holiday Key Name Function A Mode Key Switches between time adjustment mode, the operation setting modes, and run mode. B h (Hour) Key Sets hours or switches between 12-hour (am/pm) and 24-hour display. C m/ P WD (Minute/Pulse Time Width) Key Sets minutes or a pulse time width. D Write Key Writes the set data to memory or confirms settings with the program check function. E d/Test (Day Shift/Program Test) Key Moves the cursor to specify a day or starts the program check function. F Select/Holiday Key Specifies or cancels a specified day or switches to holiday setting mode. G CLR/+1h (Clear/Summer Time) Key Erases the set data and initializes the day of operation or sets/clears summer time. H Output ON/OFF switch ON: Turns on the output regardless of the setting. AUTO: Turns on/off the output according to the setting. OFF: Turns off the output regardless of the setting. Override and automatic return operation can be executed by using this key in combination with the Write Key. I TMR/ P (Timer/Pulse output) Key Selects timer operation or pulse-output operation. Display Time Adjustment Mode Indicator SU MO TU WE TH FR SA Displays the Present Time, Operation Time, and Time Width Output Indicator Lit when control output is ON. Power Indicator Lit when power is supplied to the Time Switch. Pulse Operation Indicator Lit: Pulse-output operation Not lit: Timer operation S AM PM s m ON PW +1h P AM PM P Present Day Indicator Operation Day Indicator Lit: Operation day Not lit: Non-operation day Flashing: Specified operation day Partial Operation on Specified Day Indicator Pulse Width Unit Indicator Summer Time Indicator Lit when set to summer time. Operation Setting Mode Indicator Next Operation Indicators Run mode: Displays the direction (i.e., ON or OFF) and time of the next output operation. Operation time setting mode: Displays the program number for the setting. Holiday setting mode: Displays hday (hday) when the Time Switch is in holiday setting mode. Program check: Displays test (test) during program check. 5 H5F Dimensions Note: All units are in millimeters unless otherwise indicated. H5F-B (provided with Y92F-30 Flush Mounting Adapter) (Flush Mounting) 48 H5F Y92A-48 Hard Cover (sold separately) 63.7 6 14 Terminal cover (provided) Panel Cutout Dimensions (according to DIN43700) TIME SWIT CH SU MO TU WE TH FR SA 3 00 PM OUT ON PW POWER TMR/ P ON AUTO OFF MODE CLR SELECT +1h HOLIDAY 45+0.5 37.7 44.8 50.6 48 5 00 PM OUT h m/ P WD d SET TEST 84.8 88.7 45+0.5 Note: The Time Switch uses M3.5 terminals. Note: Recommended panel thickness: 1 to 5 mm. H5F-FB (Surface Mounting) 49 42.1 50 Mounting Dimensions 1.5 5 H5F TIME SWITC H SU MO TU WE TH FR SA 3 00 PM OUT ON PW POWER OUT ON AUTO CLR OFF MODE h SELECT d +1h HOLI DAY 1 2 50 (50) 5 00 PM TMR/ P m/ P WD SET 76 92 TEST 100 to 240VAC 50/60Hz 2.4VA max. 3 4 15A 250VAC 10A 24VDC RES. (92) Y92A-48E Hard Cover (sold separately) 31 M4 tapping screws provided. Approximate pilot hole dimensions: Panel thickness of 0.8 to 1.2 mm: 3.6-mm dia. Panel thickness of 1.6 to 4.0 mm: 3.7-mm dia. Note: The Time Switch uses M3.5 terminals. Terminal cover (provided) Wiring cutout sections: Cut out as required for wiring. H5F-KB (Surface/Track Mounting) Mounting Hole Cutout Dimensions 73 50 H5F 25 42 Y92A-48E Hard Cover (provided) TIME SWITC H SU MO TU WE TH FR SA OUT POWER 3 00 PM ON PW 5 00 PM OUT TMR/ P ON AUTO CLR OFF MODE h SELECT d +1h HOLI DAY 1 2 (101.2) 68 101.2 35.3 50 90 117.4 104 to 106 m/ P WD SET (50.5) TEST 2.4VA max. 3 4 RES. 43.1 50.5 60 Terminal cover (provided) M4 tapping screws provided. Approximate pilot hole dimensions: Panel thickness of 0.8 to 1.2 mm: 3.6-mm dia. Panel thickness of 1.6 to 4.0 mm: 3.7-mm dia. 6 H5F ■ Accessories (Order Separately) Note: Depending on the operating environment, resin products may deteriorate, contract, or harden. They must be replaced on a regular basis. Soft Cover Hard Cover (provided with H5F-KB) Y92A-48F1 Y92A-48 (for H5F-B) Y92A-48E (for H5F-FB/-KB) Settings can be changed by pressing on the front of the Cover. The settings are harder to change, however, with the Cover mounted. Confirm that this does not hamper operation. Although the Soft Cover provides protection equivalent to IP54F, do not use the Time Switch in locations where it may be directly subject to splashes of oil. Flush Mounting Adapter (provided with H5F-B) Y92F-30 The Flush Mounting Adapter can be purchased individually if it is lost or damaged. Mounting Track PFP-100N2 PFP-100N, PFP-50N 16 7.3±0.15 4.5 4.5 15 25 25 10 35±0.3 27±0.15 35±0.3 25 * 25 1,000 (500) 10 (see note) 15 1 25 25 15 25 25 10 1,000 27 24 1 10 29.2 1.5 Note: The values shown in parentheses are for the PFP-50N. End Plate Spacer PFP-M PFP-S 10 6.2 16 12 5 1.8 1 50 1.8 11.5 10 M4 x 8 pan head screw 35.5 35.3 34.8 44.3 1.3 4.8 16.5 7 H5F Precautions Refer to Safety Precautions for All Timers. ■ Operating Environment !CAUTION Do not touch any of the terminals while power is being supplied. Doing so may result in electric shock. Be sure to mount the terminal cover after wiring. Do not use the Time Switch in locations subject to flammable or explosive gases. Doing so may result in explosion. Do not disassemble, repair, or modify the Time Switch. Doing so may result in electric shock, fire, or malfunction. Tighten terminal screws to the specified torque (approx. 0.98 N⋅m). Loose screws may occasionally cause fires or malfunction. (Maximum torque: 1.17 N⋅m) Before changing times or other settings while power is being supplied, either turn OFF the power on the load side or set the output ON/OFF switch to OFF and confirm the safety of the system. The life expectancy of the output relays depends on the switching capacity and switching conditions. Consider the actual application conditions and use the Time Switch within the rated load and electrical service life. If using the Time Switch beyond its ratings is unavoidable, use it together with an electromagnetic switch or contactor as shown in the following diagram. Electromagnetic contactor or electromagnetic switch Power supply Power supply Circuit H5F Load Crossover Using the Time Switch beyond its life expectancy may result in contact deposition or burning. Do not disassemble the Time Switch, deform the Time Switch by applying pressure, heat the Time Switch to temperatures above 100°C, or incinerate the Time Switch. Doing any of these may cause the built-in lithium battery to ignite or rupture. ■ Wiring • Be sure to wire the terminals correctly. • Do not connect more than two crimp terminals to each Time Switch terminal. Faulty contact may result in burn injury or fire. • Perform wiring using appropriate wires of the type specified in this document. Using a different type of wire may result in burn injury or fire due to abnormal heat generation. ■ Power Supplies • Make sure that the fluctuation of the supply voltage is within the permissible range. • Make sure that the voltage applied is within the specified range, otherwise the internal elements of the Time Switch may be damaged. • Apply the power supply voltage through a breaker, relay or switch in such a way that the voltage reaches a fixed value immediately, otherwise they may not be reset or a Time Switch error may result. • When the power is turned ON, an inrush current will flow for a short time (approx. 2 A for 0.3 ms at 264 VAC). Depending on the power supply capacity, operation may not start. Be sure to use a power supply with a sufficient capacity and a breaker. • Do not use the Time Switch in locations where condensation may occur due to high humidity or where temperature changes are severe. • Do not leave the Time Switch for long periods (i.e., one month or longer) at a high temperature with output current in the ON state. Doing so may result in the premature deterioration of internal components (e.g., electrolytic capacitors). • Separate the Time Switch from any potential sources of noise, such as high-voltage lines. When using inductive loads (e.g., electromagnetic relays), connect noise-absorbing elements (resistor and capacitor) to both ends of the coil. • Separate the Time Switch from the source of static electricity when using the Time Switch in an environment where a large amount of static electricity is produced (e.g., forming compounds, powders, or fluid materials being transported by pipe). • Use the Time Switch within the ratings specified for temperature and humidity. • Do not use the Time Switch in environments subject to shocks or vibration beyond the ranges specified in this document. • Do not use the Time Switch in locations subject to dust, corrosive gases, or direct sunlight. • Store at the specified temperature. If the H5F has been stored at a temperature of less than −10°C, allow the H5F to stand at room temperature for at least 3 hours before use. • This Time Switch is not waterproof or oil-proof. Do not use it in locations where water or oil may enter the Time Switch interior. • Organic solvents (such as paint thinner), as well as very acidic or basic solutions might damage the outer casing of the H5F. ■ Installation • Mounting the Time Switches side-by-side may reduce the life expectancies of internal components. • When using heaters, be sure to use a thermal switch for the load circuit. • When driving an inductive load (e.g., coil), a surge voltage is generated when the contacts (i.e., Time Switch output) are switched, and in some cases this may damage other devices connected to the Time Switch or the same line. Absorb the surge with a capacitor and resistor as shown in the following diagram. Time Switch output C Inductive load Power supply R As a rough guide, the capacitor (C) and resistor (R) should have the following specifications: C: 0.5 to 1 µF for a switching current of 1 A R: 0.5 to 1 Ω for a switching voltage of 1 V Use a capacitor with a dielectric strength appropriate for the power supply voltage. Use an AC-type capacitor with AC circuits. There may be cases where, due to inconsistencies in the nature and characteristics of the load, delays in restoring the load may cause problems. Be sure to confirm that correct operation is possible under the actual operating conditions. 8 H5F ■ Precautions for EN61010-1 Conformance The H5F Time Switch conforms to EN61010-1 provided that the following conditions are satisfied: Basic insulation is provided between the power supply and output terminals of the H5F. • Output terminals are connected to devices without exposed charged parts. • Output terminals are connected to devices with basic insulation that is suitable for the maximum operating voltage. ■ Others None of the Time Switch components are user-replaceable, including the battery. 9 H5F Operating Method ■ Operating Method 3. Press the WRITE Key. The colon will flash and the clock will start (from 0 s). Selecting the Mode AM All of the modes can be selected using Keys. • The days and times when output will actually turn ON/OFF are displayed chronologically. , HOLIDAY , and PW TEST 4. Press the MODE Key 3 times to return to the run mode. AM hday (2 s min.) HOLIDAY (2 s min.) (See note 1.) Run Mode (See note 2.) MODE • Control output operates according to the settings. (1 s min.) Time Adjustment Mode • Set the present day and time. MODE MODE Operation Date Setting Mode P MODE • Set, confirm, change, or clear the operation time setting. Also, set the pulse width for pulse-output operation. At the time of delivery, the mode is run mode and there is no current time setting. Before making any other settings, press the MODE Key for 1 s min. to enter time adjustment mode and set the current time using the above procedure. 1. Press the MODE Key for 1 s min. to enter time adjustment mode. The symbol flashes. Non-operation Operation -- -- Monday Sunday 8:30 am Operation Operation Tuesday Wednesday Thursday Operation 1. Enter operation time setting mode using the MODE Key. The P symbol flashes. symbol to Monday Key. Change the SU MO TU WE TH FR SA AM ON PW 4 00 Saturday The color indicates flashing -- -1 P 2. Set the ON time to 8:30 am using the h and m/ P WD Keys. SU MO TU WE TH FR SA AM 3. Press the WRITE Key. (If only the hour or the minute (but not both) is set, the operation setting time display will flash to indicate an error.) 8 30 1 P SU MO TU WE TH FR SA -- -PW h Friday SU MO TU WE TH FR SA PW 10 30 Operation Non-operation 5:15 pm The color indicates flashing ON PW Keys. -- -- SU MO TU WE TH FR SA AM m/ P WD SU MO TU WE TH FR SA PW Example: Changing the current time setting from Wednesday 10:30 am to Monday 4:00 am. and Display of factory setting Example: Setting the Time Switch to operate from Monday to Friday between 8:30 am and 5:15 pm Setting the Time time to 4:00 am using the 8 30 Note: 1. The set time is enabled when the WRITE Key is pressed. 2. The time can be displayed in either 12-hour (am/pm) or 24hour display. (Refer to page 14.) • Set, confirm, change, or clear the operation day and specified day settings. Note: 1. After the last item is displayed, the mode automatically returns to run mode. 2. At the time of delivery, the mode is the run mode. d AM Setting Timer Operation Operation Time Setting Mode P 2. Move the using the 4 00 Factory Setting Holiday Setting Mode HOLIDAY 4 00 SU MO TU WE TH FR SA PW test TEST MODE • Set a special day when the Time Switch will not operate temporarily Program check function TEST SU MO TU WE TH FR SA 1 P 4. Set the OFF time to 5:15 pm using the h and m/ P WD Keys. SU MO TU WE TH FR SA PM PW 5 15 1 P 10 H5F 5. Press the WRITE Key. (Repeat steps 2 to 5 to make other settings if necessary.) 3. Set the pulse width to 30 s using SU MO TU WE TH FR SA -- -2 PW 6. Press the MODE Key to enter operation date setting mode. 7. Move the symbol to Saturday (or d Sunday) using the Key. Clear the operation day indicator ( ) by pressing the WRITE Key. PW P 4. Press the WRITE Key. SU MO TU WE TH FR SA PW 5. Set the ON time (the time when pulse-output operation starts) to h 8:25 am using the and m/ P WD -- -- AM 8. Press the MODE Key. The Time Switch will enter run mode and operation based on the settings will start. 8 25 1 PW Lit (operation day) Not lit (non-operation day) 1 WRITE SU MO TU WE TH FR SA 6. Press the WRITE Key. (Repeat steps 5 and 6 to make other settings if necessary.) 10 30 AM ON PW PM -- -P Note: 1. Up to 12 sets of ON-OFF settings are possible. 2. Be sure to set both ON and OFF times. If only the ON time is set, the setting will be invalid. 3. At the time of delivery, all days are set as operation days. 4. Multiple-day operation is possible. 5. Continuous operation for more than 24 hours is possible by combining 2 or more sets of settings. (Refer to page 16.) 6. Both the timer operation and the pulse-output operation cannot be programmed together. 7. Press the MODE Key to enter the operation date setting mode. P SU MO TU WE TH FR SA 2 PW 5 15 P The color indicates flashing P WRITE P SU MO TU WE TH FR SA Keys. P s SU MO TU WE TH FR SA P P PW 30 P SU MO TU WE TH FR SA PW SU MO TU WE TH FR SA the m/ P WD Key. (The pulse width can be set in the range 1 to 59 s or 1 to 60 min.) P SU MO TU WE TH FR SA P P PW 8. Move the symbol to Saturday (or d Sunday) using the Key. Clear the operation day indicator ( ) by pressing the WRITE Key. SU MO TU WE TH FR SA P P PW Setting Pulse-output Operation WRITE Using pulse-output operation, the Time Switch can be set to operate at the same time every day for a fixed period. Example: Setting the Time Switch to turn ON for 30 s from 8:25 am, Monday to Friday Non-operation Operation Sunday Monday 30 s Operation Tuesday Operation Operation Friday Saturday 8:25 am The color indicates flashing SU MO TU WE TH FR SA -- -1 PW 2. Press the TMR/ P Key to set the Time Switch for pulse-output opera- Not lit (non-operation day) 9. Press the MODE Key. The Time Switch will enter run mode and operation based on the settings will start. WRITE SU MO TU WE TH FR SA AM Operation Non-operation Wednesday Thursday 1. Enter operation time setting mode using the MODE Key. The P symbol flashes. Lit (operation day) P PW 7 30 AM 8 25 Note: 1. Up to 24 sets of settings are possible. 2. Switching between timer operation and pulse-output operation will clear the operation start time, operation day, and pulse width settings. 3. Both the timer operation and pulse-output operation cannot be programmed together. P SU MO TU WE TH FR SA tion. The P symbol flashes. (The Time Switch is set for timer operation at the time of delivery.) P PW -- P 11 H5F Setting Partial Operation on Specified Day The Time Switch can be set to operate according to only some of the settings on a user-specified day. Example: Monday to Friday: ON at 8:30 am; OFF at 0:30 pm ON at 1:15 pm; OFF at 5:15 pm ON at 8:30 am; OFF at 0:30 pm Saturday: 8. Move the symbol to Saturday d using the Key. Make the operation day indicator flash by pressing the WRITE Key. Move the present day indicator to Sunday d using the Key. Clear the operation day indicator by pressing the WRITE Key. WRITE Non-operation Operation Sunday Monday Operation Operation Operation Tuesday Wednesday Thursday Saturday 8:30 am to 0:30 pm (Specified Day Operation) 1:15 pm to 5:15 pm 1. Enter operation time setting mode using the MODE Key. The color indicates flashing SU MO TU WE TH FR SA PW 2. Press the SELECT Key. The S symbol will be displayed. Set the ON time for the specified day to h 8:30 am using the and m/ P WD -- -- PW 3. Press the WRITE Key. P Not lit: Non-operation day WRITE 8 30 1 S P SU MO TU WE TH FR SA -- -PW 9. Press the MODE Key. The Time Switch will enter run mode and operation based on the settings will start. The operation day indicator ( ) of the specified day will flash. and m/ P WD 1 S PW and 0 30 1 P SU MO TU WE TH FR SA Keys. PM PW 6. Press the WRITE Key. Set the time to 5:15 pm using the h and m/ P WD Keys. PW WRITE Key. 1 15 2 P SU MO TU WE TH FR SA PM 7. Press the 10 30 PM 0 30 Example: Changing the ON time for program 1 from 8:30 am to 7:45 am 1. Enter operation time setting mode using the MODE Key. The ON time for program 1 will be displayed. The color indicates flashing SU MO TU WE TH FR SA AM ON PW using the h and m/ P WD 5 15 2 ON PW 3. Press the WRITE Key. The OFF time for program 1 will be displayed. (Make changes, if necessary, using the same procedure as for ON time.) 4. Press the MODE Key to enter operation date setting mode. The operation dates will be displayed. (Make changes, if necessary, using the d and WRITE Keys.) 1 P 7 45 1 P SU MO TU WE TH FR SA PM ON PW 6 30 1 P SU MO TU WE TH FR SA ON PW P P SU MO TU WE TH FR SA Press the MODE Key to enter operation date setting mode. 5. Press the MODE Key. The Time Switch will enter run mode and operation will start. SU MO TU WE TH FR SA AM ON PW PW 8 30 SU MO TU WE TH FR SA Keys. S The color indicates flashing m/ P WD ON PW AM PM h AM Changing Timer Operation Settings P SU MO TU WE TH FR SA Keys. 5. Press the WRITE Key. Set the time to 1:15 pm using the SU MO TU WE TH FR SA Note: 1. Partial operation on specified day can be set for two or more programs. For each program, however, the S must be displayed by pressing the SELECT Key. 2. Two or more days can be specified as specified days. 3. Partial operation on specified day can also be set for pulseoutput operation. 2. Change the ON time to 7:45 am 4. Set the OFF time for the specified h day to 0:30 pm using the WRITE Flashing: Specified operation day SU MO TU WE TH FR SA AM Keys. 1 P PW Lit: Operation day Operation Specified day Friday SU MO TU WE TH FR SA 10 30 PM 6 30 P Note: Operation based on the changed settings will start as soon as the Time Switch returns to run mode. 12 H5F Changing Pulse-output Operation Settings Clearing the ON/OFF Settings for Individual Programs Example: Changing the pulse width from 30 s to 20 s Example: Clearing the settings for program 2 1. Enter operation time setting mode using MODE Key. The pulse width is displayed. 1. Enter operation time setting mode using MODE Key. The ON time for program 1 will be displayed. The color indicates flashing SU MO TU WE TH FR SA P PW 2. Change the pulse width to 20 s using m/ P WD 30 PW 3. Press the WRITE Key. The ON time for program 1 will be displayed. (Make changes, if necessary, using the Key.) h , m/ P WD and WRITE P 7 40 1 PW 4. Press the MODE Key to enter operation date setting mode. The operation dates will be displayed. (Make changes, if necessary, using the d and WRITE Keys.) 5. Press the MODE Key. The Time Switch will enter run mode and operation will start. P P P SU MO TU WE TH FR SA AM P PW 7 30 AM 1 15 ON PW 7 40 Note: Operation based on the changed settings will start as soon as the Time Switch returns to run mode. 3. Press the CLR Key. (Both the ON and OFF settings are cleared with just one operation. If this operation is performed while output is ON, output stays ON until the Time Switch returns to run mode.) 4. Press the MODE Key twice. The Time Switch will enter run mode and operation based on the new settings (i.e. without the cleared programs) will start. S P SU MO TU WE TH FR SA PM P SU MO TU WE TH FR SA PW 2. Press the WRITE Key twice. The ON time for program 2 will be displayed. 1 s SU MO TU WE TH FR SA AM ON PW P Key. 20 8 30 AM s SU MO TU WE TH FR SA P The color indicates flashing SU MO TU WE TH FR SA 2 P SU MO TU WE TH FR SA -- -- ON PW 2 P SU MO TU WE TH FR SA AM ON PW 10 30 PM 0 30 Note: Settings for pulse-output operation can be cleared for individual programs in the same way. Clearing all Settings 1. Enter operation time setting mode or operation date setting mode using the MODE Key. The color indicates flashing SU MO TU WE TH FR SA 8 30 AM ON PW 2. Press the CLR Key for 3 s min. The clearing process will be completed 3 s has elapsed. Output will turn OFF immediately. 1 P SU MO TU WE TH FR SA c lr ON PW 3. When all the settings have been cleared, the operation time, operation day, pulse width, holiday, partial operation on specified day, and override and automatic return operation settings will be returned to their factory settings. S SU MO TU WE TH FR SA -- -1 PW Note: The clearing process will be canceled if the CLR P Key is re- leased while clr is still flashing and only the settings for the display program will be cleared. Note: The current time cannot be deleted. 13 H5F Holiday Setting Function The following example shows how to stop operation for a certain day in the present week and restore normal operation from the following week using the holiday setting function. Example: Stopping operation for Friday and Saturday in the current week and resuming normal operation from the following week 1. Press the HOLIDAY Key for 2 s min. in run mode to enter holiday setting mode. hday will flash and the operation day indicator ( ) will light under the days set for operation day. 2. Move the symbol to Friday using d Key. Clear the operation day indicator ( ) by pressing the WRITE Key. Repeat the procedure for Saturday. (Press the WRITE Key again to clear the holiday setting.) 3. Press the HOLIDAY Key. The Time Switch will enter run mode and the operation day indicator under the days set as holidays will turn OFF. (When a day set as a holiday has passed, the ( ) indicator under that day will automatically turn ON again.) ON PW hd ay 5 15 The color indicates flashing 3 30 h (2 s min.) ON PW 5 15 PM 15 30 17 15 Note: 1. Switching is possible only in run mode. 2. The factory setting is 12-hour (am/pm) display. Override and Automatic Return Operation ON PW hd ay SU MO TU WE TH FR SA AM ON PW 10 30 PM 5 15 Override and automatic return operation can be used to handle sudden schedule changes without making changes to the program. The output status can be set to ON or OFF directly using the output ON/ OFF switch. This output status is then held until the next ON/OFF operation time. Example 1: Starting operation earlier than the scheduled time on the present day only Regular setting: The color indicates flashing PM SU MO TU WE TH FR SA SU MO TU WE TH FR SA SU MO TU WE TH FR SA +1h SU MO TU WE TH FR SA ON PW Each time the +1h Key is pressed in run mode, the present time will switch between the (standard) present time and the present time + 1 hour (summer time). 3 30 24-hour Display PM The summer time function allows the Time Switch to be used in regions that observe daylight saving time during the summer. ON PW 12-hour (am/pm) Display The color indicates flashing Summer Time (DST) Function PM h Each time the Key is pressed for 2 s min. in run mode, the time display switches between 12-hour (am/pm) and 24-hour display. SU MO TU WE TH FR SA Note: 1. Any day in the 7-day period starting from the present day can be set as a holiday. 2. Operation based on the new settings (i.e., including the holiday setting) will start as soon as the Time Switch returns to run mode. 3. Holiday setting mode can be entered from run mode only. 4. If the present day setting in time adjustment mode is changed, all holiday settings will be cleared. 5. If a day set as a holiday is changed in operation date setting mode, the holiday setting for that day will be cleared. SU MO TU WE TH FR SA Switching between 12-hour (am/pm) and 24-hour Display PM ON PW 4 30 ON at 8:30 am; OFF at 5:15 pm Use the following procedure to start operation at 7:00 am for the present day only. Present day Regular program 8:30 am 5:15 pm 8:30 am 5:15 pm Override and automatic return operation ON Output Next day 7:00 am 7:00 am 5:15 pm 8:30 am 5:15 pm From the next day, output operates according to the regular program. 1. Change the setting of the output ON/OFF switch from AUTO to ON. 2. Return the setting of the output ON/OFF switch from Switch ON to AUTO while holding down the WRITE Key. ON The ON state will be held from the point at which this AUTO operation is performed (indicated by the arrow) until OFF the next (regular) OFF time. Example 2: Stopping operation earlier than the scheduled time on the present day only Regular setting: ON at 8:30 am; OFF at 5:15 pm +1h PM 5 15 Note: 1. The summer time indicator ( +1h ) is displayed while summer time is set. 2. The contents of the programs are not changed. 3. The summer time setting can only be set or cleared in run mode. Use the following procedure to stop operation at 3:00 pm for the present day only. Present day Regular program Override and automatic return operation ON Output Next day 3:00 pm 8:30 am 5:15 pm 8:30 am 3:00 pm 8:30 am 8:30 am 5:15 pm 5:15 pm From the next day, output operates according to the regular program. 1. Change the setting of the output ON/OFF switch from AUTO to OFF. 14 H5F 2. Return the setting of the output ON/OFF switch from OFF to AUTO while holding down the WRITE Key. The OFF state will be held from the point at which this operation is performed (indicated by the arrow) until the next (regular) ON time. Switch ON AUTO OFF Note: 1. This operation is possible in run mode only. 2. Override and automatic return operation can be cleared by setting the output ON/OFF switch to the opposite of the present status. For example, if the output is ON, override and automatic return operation can be cleared by setting the output ON/OFF switch to OFF. 3. Override and automatic return operation cannot be set or cleared if power is not being supplied to the Time Switch. 4. Override and automatic return operation is cleared if any of the settings are changed. Using Override and Automatic Return Operation for Pulse-output Operation Override and automatic return operation proceeds in the following way when used for pulse-output operation. • If override and automatic return operation starts with a forced ON, output is turned ON for the time corresponding to the set pulse width. • If override and automatic return operation starts from a forced OFF, output remains OFF until the pulse output ends. The operation method is the same as for timer operation. Example 3: Override and automatic return operation starting from a forced OFF while output is ON (pulse width: 30 min) Regular program Output From the next time onwards, output operates according to the regular program. Point at which the Output ON/OFF Key changes from AUTO to OFF. Point at which the Output ON/OFF Key changes from OFF to AUTO with the WRITE Key held down. Program Check Function The days and times at which output turns ON or OFF over the course of one week can be displayed continuously in the actual order in which they will occur. 1. Press the TEST Key for 2 s min. in run mode to start the program check. The display will flash test and the day and time of the next change in output status will be displayed. Example 1: Override and automatic return operation starting with a forced ON while output is ON (pulse width: 30 min) Regular program Output 30 min From the next time onwards, output operates according to the regular program. Point at which the Output ON/OFF Key changes from AUTO to ON. Point at which the Output ON/OFF Key changes from ON to AUTO with the WRITE Key held down. Example 2: Override and automatic return operation starting with a forced ON while output is OFF (pulse width: 30 min) Regular program Output 30 min From the next time onwards, output operates according to the regular program. The color indicates flashing items. SU MO TU WE TH FR SA PM PW 1 15 te st In the above example, output will turn ON at 1:15 pm on Monday. 2. Press the WRITE Key. The display will change to the day and time of the next change in output status. (Continue pressing the WRITE Key to display the days and times for one week.) SU MO TU WE TH FR SA PM PW 5 30 te st In the above example, output will turn OFF at 5:30 pm on Monday. 3. If the WRITE Key is pressed with the last setting for the week displayed, end is displayed for 2 s and then the Time Switch automatically returns to run mode. SU MO TU WE TH FR SA PW e nd Note: 1. The program check can be started from run mode only. 2. Press the TEST Key again to return to run mode before reaching the end of the program check function display sequence. 3. The ON and OFF symbols ( / ) displayed during program check have no effect on the present operation. 4. Only ON times are displayed for pulse-output operation. Point at which the Output ON/OFF Key changes from AUTO to ON. Point at which the Output ON/OFF Key changes from ON to AUTO with the WRITE Key held down. 15 H5F ■ Setting Examples As shown in the following examples, continuous operation for more than 24 hours is possible by combining two or more settings. Refer to Setting Precautions for more details. Example 1: (When the OFF time is later than the ON time) Use the settings given below to turn ON output from 8:30 am on Monday right through to 0:30 pm on Saturday. SU MO 1:00 pm TU 0:30 pm WE TH FR 8:30 am 2:00 pm SA 0:30 pm Operation time settings: 1:00 pm to 0:30 pm 8:30 am to 2:00 pm Example 3: Use the settings given below to turn ON output from 8:00 pm to 7:00 am from Monday to Thursday and from 8:00 pm on Friday right through to 7:00 am on Monday. SU MO TU WE TH FR SA 7:00 am 2:00 pm 1:00 pm 8:00 am 8:00 am Operation time settings: 1:00 pm to 8:00 am (specified day operation) 7:00 am to 2:00 pm Operation day settings: Specified day ( ): Monday Operation day ( ): Tuesday, Wednesday, Thursday, Friday The color indicates lit The color indicates flashing Operation day settings: Operation day ( ): Monday, Tuesday, Wednesday, Thursday, Friday Example 2: (When the OFF time is earlier than the ON time) Use the settings given below to turn ON output from 1:00 pm on Monday right through to 8:00 am on Saturday. ■ Setting Precautions 1. If settings overlap, the earliest ON time and the latest OFF time will be used. Program 1 + Program 2 Output SU MO TU WE TH FR SA 7:00 am 2:00 pm 1:00 pm • Output will stay ON continuously without interruption. • If an ON and OFF setting are made for the same time, the output status will not change at that time. 8:00 am 8:00 am Operation time settings: 1:00 pm to 8:00 am (specified day operation) 7:00 am to 2:00 pm 2. If there is a switch between timer operation and pulse-output operation, the operation time, operation day, and pulse width settings will all be cleared. Operation day settings: Specified day ( ): Monday Operation day ( ): Tuesday, Wednesday, Thursday, Friday ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 16 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2020.5 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2020 All Right Reserved.