ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
Features
General Description
■ ICC reduced by 50% on 74AC only
The AC08/ACT08 contains four, 2-input AND gates.
■ Outputs source/sink 24mA
Ordering Information
Order
Number
Package
Number
Package Description
74AC08SC
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74AC08SJ
M14D
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74AC08MTC
MTC14
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
74AC08PC
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
74ACT08SC
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74ACT08MTC
MTC14
74ACT08PC
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.
All packages are lead free per JEDEC: J-STD-020B standard.
Connection Diagram
Logic Symbol
IEEE/IEC
Pin Description
Pin Names
Description
An, Bn
Inputs
On
Outputs
©1988 Semiconductor Components industries, LLC.
November-2017, Rev.2
Publication Order Number:
74ACT08/D
74AC08, 74ACT08 — Quad 2-Input AND Gate
74AC08, 74ACT08
Quad 2-Input AND Gate
Symbol
VCC
IIK
Parameter
Supply Voltage
Rating
–0.5V to +7.0V
DC Input Diode Current
VI = –0.5V
–20mA
VI = VCC + 0.5
+20mA
VI
DC Input Voltage
–0.5V to VCC + 0.5V
IOK
DC Output Diode Current
VO = –0.5V
–20mA
VO = VCC + 0.5V
+20mA
VO
DC Output Voltage
–0.5V to VCC + 0.5V
IO
DC Output Source or Sink Current
±50mA
ICC or IGND DC VCC or Ground Current per Output Pin
±50mA
TSTG
Storage Temperature
–65°C to +150°C
TJ
Junction Temperature
140°C
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. ON
Semiconductor does not recommend exceeding them or designing to absolute maximum ratings.
Symbol
VCC
Parameter
Rating
Supply Voltage
AC
2.0V to 6.0V
ACT
4.5V to 5.5V
VI
Input Voltage
0V to VCC
VO
Output Voltage
0V to VCC
TA
Operating Temperature
∆V / ∆t
–40°C to +85°C
Minimum Input Edge Rate, AC Devices:
125mV/ns
VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V
∆V / ∆t
Minimum Input Edge Rate, ACT Devices:
VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V
www.onsemi.com
2
125mV/ns
74AC08, 74ACT08 — Quad 2-Input AND Gate
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
VIH
Parameter
Minimum HIGH Level
Input Voltage
VCC
(V)
3.0
TA = +25°C
Conditions
VOUT = 0.1V or
VCC – 0.1V
Maximum LOW Level
Input Voltage
VOH
Units
2.1
2.1
2.25
3.15
3.15
2.75
3.85
3.85
1.5
0.9
0.9
2.25
1.35
1.35
2.75
1.65
1.65
2.99
2.9
2.9
4.5
4.49
4.4
4.4
5.5
5.49
5.4
5.4
2.56
2.46
3.86
3.76
4.86
4.76
0.002
0.1
0.1
4.5
0.001
0.1
0.1
5.5
0.001
0.1
0.1
0.36
0.44
0.36
0.44
0.36
0.44
±0.1
±1.0
µA
4.5
3.0
4.5
VOUT = 0.1V or
VCC – 0.1V
5.5
Minimum HIGH Level
Output Voltage
Guaranteed Limits
1.5
5.5
VIL
Typ.
TA = –40°C to +85°C
3.0
3.0
IOUT = –50µA
VIN = VIL or VIH,
V
V
V
IOH = –12mA
4.5
VIN = VIL or VIH,
IOH = –24mA
5.5
VIN = VIL or VIH,
IOH =
VOL
Maximum LOW Level
Output Voltage
3.0
3.0
–24mA(1)
IOUT = 50µA
VIN = VIL or VIH,
V
IOL = 12mA
4.5
VIN = VIL or VIH,
IOL = 24mA
5.5
VIN = VIL or VIH,
IOL =
24mA(1)
IIN(3)
Maximum Input
Leakage Current
5.5
VI = VCC, GND
IOLD
Minimum Dynamic
Output Current(2)
5.5
VOLD = 1.65V Max.
75
mA
5.5
VOHD = 3.85V Min.
–75
mA
Maximum Quiescent
Supply Current
5.5
VIN = VCC or GND
20.0
µA
IOHD
ICC
(3)
2.0
Notes:
1. All outputs loaded; thresholds on input associated with output under test.
2. Maximum test duration 2.0ms, one output loaded at a time.
3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.
www.onsemi.com
3
74AC08, 74ACT08 — Quad 2-Input AND Gate
DC Electrical Characteristics for AC
Symbol
VIH
VIL
VOH
Parameter
VCC
(V)
Conditions
Typ.
TA = –40°C to +85°C
Guaranteed Limits
VOUT = 0.1V or
VCC – 0.1V
1.5
2.0
2.0
1.5
2.0
2.0
VOUT = 0.1V or
VCC – 0.1V
1.5
0.8
0.8
5.5
1.5
0.8
0.8
4.5
IOUT = –50µA
4.49
4.4
4.4
Minimum HIGH Level
Input Voltage
5.5
Maximum LOW Level
Input Voltage
Minimum HIGH Level
Output Voltage
TA = +25°C
4.5
4.5
5.5
4.5
5.49
VIN = VIL or VIH,
5.4
5.4
3.86
3.76
4.86
4.76
0.1
0.1
Units
V
V
V
IOH = –24mA
5.5
VIN = VIL or VIH,
IOH = –24mA(4)
VOL
Maximum LOW Level
Output Voltage
4.5
IOUT = 50µA
5.5
4.5
0.001
0.001
V
0.1
0.1
0.36
0.44
VIN = VIL or VIH,
0.36
0.44
VI = VCC, GND
±0.1
±1.0
µA
VIN = VIL or VIH,
IOL = 24mA
5.5
IOL= 24mA(4)
IIN
Maximum Input
Leakage Current
5.5
ICCT
Maximum ICC/Input
5.5
VI = VCC – 2.1V
1.5
mA
IOLD
Minimum Dynamic
Output Current(5)
5.5
VOLD = 1.65V Max.
75
mA
5.5
VOHD = 3.85V Min.
–75
mA
Maximum Quiescent
Supply Current
5.5
VIN = VCC or GND
40.0
µA
IOHD
ICC
0.6
Notes:
4. All outputs loaded; thresholds on input associated with output under test.
5. Maximum test duration 2.0ms, one output loaded at a time.
www.onsemi.com
4
4.0
74AC08, 74ACT08 — Quad 2-Input AND Gate
DC Electrical Characteristics for ACT
TA = +25°C,
CL = 50pF
Symbol
tPLH
tPHL
Parameter
Propagation Delay
Propagation Delay
TA = –40°C to +85°C,
CL = 50pF
VCC (V)(6)
Min.
Typ.
Max.
Min.
Max.
Units
3.3
1.5
7.5
9.5
1.0
10.0
ns
5.0
1.5
5.5
7.5
1.0
8.5
3.3
1.5
7.0
8.5
1.0
9.0
5.0
1.5
5.5
7.0
1.0
7.5
ns
Note:
6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V.
AC Electrical Characteristics for ACT
TA = +25°C,
CL = 50pF
Symbol
Parameter
TA = –40°C to +85°C,
CL = 50pF
VCC (V)(7)
Min.
Typ.
Max.
Min.
Max.
Units
tPLH
Propagation Delay
5.0
1.0
6.5
9.0
1.0
10.0
ns
tPHL
Propagation Delay
5.0
1.0
6.5
9.0
1.0
10.0
ns
Note:
7. Voltage range 5.0 is 5.0V ± 0.5V.
Capacitance
Symbol
Parameter
Conditions
Typ.
Units
CIN
Input Capacitance
VCC = OPEN
4.5
pF
CPD
Power Dissipation Capacitance
VCC = 5.0V
20.0
pF
www.onsemi.com
5
74AC08, 74ACT08 — Quad 2-Input AND Gate
AC Electrical Characteristics for AC
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
❖
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com