74LCX652MSA

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised March 2001 74LCX652 Low Voltage Transceiver/Register with 5V Tolerant Inputs and Outputs General Description Features The LCX652 consists of bus transceiver circuits with Dtype flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from internal registers. Data on the A or B bus will be clocked into the registers as the appropriate clock pin goes to the HIGH logic level. Output Enable pins (OEAB, OEBA) are provided to control the transceiver function. ■ 5V tolerant inputs and outputs The LCX652 is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The LCX652 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. ■ 2.3V − 3.6V VCC specifications provided ■ 7.0 ns tPD max (VCC = 3.3V), 10 µA ICC max ■ Power down high impedance inputs and outputs ■ Supports live insertion/withdrawal (Note 1) ■ ±24 mA output drive (VCC = 3.0V) ■ Implements patented noise/EMI reduction circuitry ■ Latch-up performance exceeds 500 mA ■ ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or down, OE should be tied to VCC through a pull-up resistor: the minimum value or the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number Package Number Package Description 74LCX652WM M24B 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 74LCX652MSA MSA24 24-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide 74LCX652MTC MTC24 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Pin Descriptions Pin Names © 2001 Fairchild Semiconductor Corporation DS011998 Description A0–A7, B0–B7 A and B Inputs/3-STATE Outputs CPAB, CPBA Clock Inputs SAB, SBA Select Inputs OEAB, OEBA Output Enable Inputs www.fairchildsemi.com 74LCX652 Low Voltage Transceiver/Register with 5V Tolerant Inputs and Outputs February 1994 74LCX652 Logic Symbols IEEE/IEC Truth Table (Note 2) Inputs OEAB OEBA L H L H Inputs/Outputs CPAB CPBA H or L H or L         SAB SBA X X X X X Input Not Specified Store A, Hold B X X Input Output Store A in Both Registers X X Not Specified Input Hold A, Store B X X Output Input Store B in Both Registers Output Input Real-Time B Data to A Bus X H H L X L L L L X X X L L L X H or L X H H or L H H X X L X H H H or L X H X H L H or L H or L H H Input B0 thru B7 X H H or L A0 thru A7 Operating Mode Input Isolation Store A and B Data Store B Data to A Bus Input Output Real-Time A Data to B Bus Stored A Data to B Bus Output Output Stored A Data to B Bus and Stored B Data to A Bus H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial = LOW-to-HIGH Clock Transition  Note 2: The data output functions may be enabled or disabled by various signals at OEAB or OEBA inputs. Data input functions are always enabled, i.e., data at the bus pins will be stored on every LOW-to-HIGH transition on the clock inputs. www.fairchildsemi.com 2 Data on the A or B data bus, or both can be stored in the internal D flip-flop by LOW to HIGH transitions at the appropriate Clock Inputs (CPAB, CPBA) regardless of the Select or Output Enable Inputs. When SAB and SBA are in the real time transfer mode, it is also possible to store data without using the internal D flip-flops by simultaneously enabling OEAB and OEBA. In this configuration each Output reinforces its Input. Thus when all other data sources to the two sets of bus lines are in a HIGH impedance state, each set of bus lines will remain at its last state. In the transceiver mode, data present at the HIGH impedance port may be stored in either the A or B register or both. The select (SAB, SBA) controls can multiplex stored and real-time. The examples below demonstrate the four fundamental bus-management functions that can be performed with the Octal bus transceiver and receiver. Real-Time Transfer Bus B to Bus A Real-Time Transfer Bus A to Bus B OEAB OEBA CPAB CPBA SAB SBA L L X X X OEAB OEBA CPAB CPBA SAB SBA L H H Transfer Storage Data to A or B L H or L H or L X L X Storage OEAB OEBA CPAB CPBA SAB SBA H X H OEAB OEBA CPAB CPBA SAB SBA H X 3 H L X L H     X X X X X X X X www.fairchildsemi.com 74LCX652 Functional Description 74LCX652 Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 4 Symbol Parameter Value VCC Supply Voltage −0.5 to +7.0 VI DC Input Voltage −0.5 to +7.0 VO DC Output Voltage −0.5 to +7.0 Conditions Units V V Output in 3-STATE −0.5 to VCC + 0.5 Output in HIGH or LOW State (Note 4) IIK DC Input Diode Current −50 VI < GND IOK DC Output Diode Current −50 VO < GND +50 VO > VCC V mA mA IO DC Output Source/Sink Current ±50 mA ICC DC Supply Current per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Recommended Operating Conditions (Note 5) Symbol VCC Parameter Supply Voltage VI Input Voltage VO Output Voltage IOH/IOL Output Current TA Free-Air Operating Temperature ∆t/∆V Input Edge Rate, VIN = 0.8V − 2.0V, VCC = 3.0V Min Max Operating 2.0 3.6 Data Retention 1.5 3.6 0 5.5 HIGH or LOW State 0 VCC 3-STATE 0 5.5 VCC = 3.0V − 3.6V ±24 VCC = 2.7V − 3.0V ±12 VCC = 2.3V − 2.7V ±8 Units V V V mA −40 85 °C 0 10 ns/V Note 3: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 4: IO Absolute Maximum Rating must be observed. Note 5: Unused inputs or I/Os must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IOH = −100 µA VCC TA = −40°C to +85°C (V) Min 2.3 − 2.7 1.7 2.7 − 3.6 2.0 Max V 2.3 − 2.7 0.7 2.7 − 3.6 0.8 2.3 − 3.6 VCC − 0.2 IOH = −8 mA 2.3 1.8 IOH = −12 mA 2.7 2.2 IOH = −18 mA 3.0 2.4 IOH = −24 mA 3.0 2.2 IOL = 100 µA 2.3 − 3.6 Units V V 0.2 IOL = 8 mA 2.3 0.6 IOL = 12 mA 2.7 0.4 IOL = 16 mA 3.0 0.4 V IOL = 24 mA 3.0 0.55 II Input Leakage Current 0 ≤ VI ≤ 5.5V 2.3 − 3.6 ±5.0 µA IOZ 3-STATE I/O Leakage 0 ≤ VO ≤ 5.5V 2.3 − 3.6 ±5.0 µA 0 10 µA VI = V IH or VIL IOFF Power-Off Leakage Current VI or VO = 5.5V 5 www.fairchildsemi.com 74LCX652 Absolute Maximum Ratings(Note 3) 74LCX652 DC Electrical Characteristics Symbol (Continued) Parameter VCC Conditions (V) ICC ∆ICC Quiescent Supply Current Increase in ICC per Input TA = −40°C to +85°C Min Units Max VI = VCC or GND 2.3 − 3.6 10 3.6V ≤ VI, VO ≤ 5.5V (Note 6) 2.3 − 3.6 ±10 VIH = VCC −0.6V 2.3 − 3.6 500 µA µA Note 6: Outputs disabled or 3-STATE only. AC Electrical Characteristics TA = −40°C to +85°C; RL = 500Ω Symbol Parameter VCC = 3.3V ± 0.3V VCC = 2.7V VCC = 2.5V ± 0.2V CL = 50 pF CL = 50 pF CL = 30 pF Min Max Min Max Min Max 1.5 7.0 1.5 8.0 1.5 8.4 Bus to Bus 1.5 7.0 1.5 8.0 1.5 8.4 tPHL Propagation Delay 1.5 8.5 1.5 9.5 1.5 10.5 tPLH Clock to Bus 1.5 8.5 1.5 9.5 1.5 10.5 tPHL Propagation Delay 1.5 8.5 1.5 9.5 1.5 10.5 tPLH Select to Bus 1.5 8.5 1.5 9.5 1.5 10.5 tPZL Output Enable Time 1.5 8.5 1.5 9.5 1.5 10.5 1.5 8.5 1.5 9.5 1.5 10.5 1.5 8.5 1.5 9.5 1.5 10.5 1.5 8.5 1.5 9.5 1.5 10.5 fMAX Maximum Clock Frequency 150 tPHL Propagation Delay tPLH tPZH tPLZ Output Disable Time tPHZ Units MHz ns ns ns ns ns tS Setup Time 2.5 2.5 4.0 ns tH Hold Time 1.5 1.5 2.0 ns tW Pulse Width 3.3 3.3 4.0 ns tOSHL Output to Output Skew (Note 7) 1.0 tOSLH ns 1.0 Note 7: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Parameter guaranteed by design. Dynamic Switching Characteristics Symbol VOLP VOLV VCC TA = 25°C (V) Typical CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 0.6 CL = 50 pF, VIH = 3.3V, VIL = 0V 3.3 −0.8 CL = 30 pF, VIH = 2.5V, VIL = 0V 2.5 −0.6 Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Conditions Units V V Capacitance Typical Units CIN Symbol Input Capacitance Parameter VCC = Open, VI = 0V or VCC 7 pF CI/O Input/Output Capacitance VCC = 3.3V, VI = 0V or VCC 8 pF CPD Power Dissipation Capacitance VCC = 3.3V, VI = 0V or VCC, f = 10 MHz 25 pF www.fairchildsemi.com Conditions 6 74LCX652 AC LOADING and WAVEFORMS Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V VCC x 2 at VCC = 2.5 ± 0.2V tPZH,tPHZ GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output High Enable and Disable Times for Logic Propagation Delay. Pulse Width and trec Waveforms Setup Time, Hold Time and Recovery Time for Logic trise and tfall 3-STATE Output Low Enable and Disable Times for Logic FIGURE 2. Waveforms (Input Characteristics; f =1MHz, tr = tf = 3ns) Symbol VCC 3.3V ± 0.3V 2.7V 2.5V ± 0.2V Vmi 1.5V 1.5V VCC/2 Vmo 1.5V 1.5V VCC/2 Vx VOL + 0.3V VOL + 0.3V VOL + 0.15V Vy VOH − 0.3V VOH − 0.3V VOH − 0.15V 7 www.fairchildsemi.com 74LCX652 Schematic Diagram Generic for LCX Family www.fairchildsemi.com 8 74LCX652 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Number M24B 24-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide Package Number MSA24 9 www.fairchildsemi.com 74LCX652 Low Voltage Transceiver/Register with 5V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC24 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 10 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com