74LVX32MX

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 74LVX32 Low Voltage Quad 2-Input OR Gate Features General Description ■ Input voltage level translation from 5V to 3V The LVX32 contains four 2-input OR gates. The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems. ■ Ideal for low power/low noise 3.3V applications ■ Guaranteed simultaneous switching noise level and dynamic threshold performance Ordering Information Order Number Package Number Package Description 74LVX32M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74LVX32SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LVX32MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names Description An, Bn Inputs On Outputs ©1993 Fairchild Semiconductor Corporation 74LVX32 Rev. 1.4.0 www.fairchildsemi.com 74LVX32 — Low Voltage Quad 2-Input OR Gate February 2008 Symbol VCC Parameter Rating Supply Voltage –0.5V to +7.0V IIK DC Input Diode Current, VI = –0.5V VI DC Input Voltage IOK DC Output Diode Current –20mA –0.5V to 7V VO = –0.5V –20mA VO = VCC + 0.5V +20mA VO DC Output Voltage –0.5V to VCC + 0.5V IO DC Output Source or Sink Current ±25mA ICC or IGND DC VCC or Ground Current TSTG Storage Temperature P ±50mA –65°C to +150°C Power Dissipation 180mW Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Rating Supply Voltage 2.0V to 3.6V VI Input Voltage 0V to 5.5V VO Output Voltage 0V to VCC TA Operating Temperature ∆t / ∆V Input Rise and Fall Time –40°C to +85°C 0ns/V to 100ns/V Note: 1. Unused inputs must be held HIGH or LOW. They may not float. ©1993 Fairchild Semiconductor Corporation 74LVX32 Rev. 1.4.0 www.fairchildsemi.com 2 74LVX32 — Low Voltage Quad 2-Input OR Gate Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = +25°C Symbol VIH VIL VOH VOL Parameter VCC HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage Conditions Min. Typ. Max. TA = –40°C to +85°C Min. 2.0 1.5 1.5 3.0 2.0 2.0 3.6 2.4 Max. Units V 2.4 2.0 0.5 0.5 3.0 0.8 0.8 3.6 0.8 0.8 2.0 VIN = VIL or VIH, IOH = –50µA 1.9 2.0 1.9 3.0 VIN = VIL or VIH, IOH = –50µA 2.9 3.0 2.9 VIN = VIL or VIH, IOH = –4mA 2.58 V V 2.48 2.0 VIN = VIL or VIH, IOL = 50µA 0.0 0.1 0.1 3.0 VIN = VIL or VIH, IOL = 50µA 0.0 0.1 0.1 VIN = VIL or VIH, IOL = 4mA 0.36 0.44 V IIN Input Leakage Current 3.6 VIN = 5.5V or GND ±0.1 ±1.0 µA ICC Quiescent Supply Current 3.6 VIN = VCC or GND 2.0 20.0 µA Noise Characteristics(2) TA = 25°C Symbol Parameter VCC (V) CL (pF) Typ. Limit Units VOLP Quiet Output Maximum Dynamic VOL 3.3 50 0.3 0.5 V VOLV Quiet Output Minimum Dynamic VOL 3.3 50 –0.3 –0.5 V VIHD Minimum HIGH Level Dynamic Input Voltage 3.3 50 2.0 V VILD Maximum LOW Level Dynamic Input Voltage 3.3 50 0.8 V Note: 2. Input tr = tf = 3ns ©1993 Fairchild Semiconductor Corporation 74LVX32 Rev. 1.4.0 www.fairchildsemi.com 3 74LVX32 — Low Voltage Quad 2-Input OR Gate DC Electrical Characteristics TA = –40°C to +85°C TA = +25°C Symbol tPLH, tPHL Parameter Propagation Delay Time VCC (V) CL (pF) 2.7 3.3 ± 0.3 tOSLH, tOSHL Output to Output Skew(3) 2.7 Min. Typ. Max. Min. Max. Units 15 5.8 10.7 1.0 12.5 ns 50 8.3 14.2 1.0 16.0 15 4.4 6.6 1.0 7.5 50 6.9 10.1 1.0 11.5 50 3.3 1.5 1.5 1.5 1.5 ns Note: 3. Parameter guaranteed by design tOSLH = |tPLHm–tPLHn|, tOSHL = |tPHLm–tPHLn| Capacitance TA = –40°C to +85°C TA = +25°C Symbol Parameter Min. Typ. Max. 10 CIN Input Capacitance 4 CPD Power Dissipation Capacitance(4) 14 Min. Max. 10 Units pF pF Note: 4. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. C PD × V CC × f IN × I CC Average operating current can be obtained by the eqation: ICC(opr.) = -------------------------------------------------------4 ( per, Gate ) ©1993 Fairchild Semiconductor Corporation 74LVX32 Rev. 1.4.0 www.fairchildsemi.com 4 74LVX32 — Low Voltage Quad 2-Input OR Gate AC Electrical Characteristics 0.65 A 0.43TYP 14 8 B 6.4 6.10 3.2 1 PIN#1 IDENT 0.2 C B A 7 TOP VIEW 1.65 ALL LEAD TIPS 0.45 RECOMMENDED LAND PATTERN 1.2 MAX 0.30 0.19 ALL LEAD TIPS 0.1 C 0.65 SEE DETAIL A 0.90+0.15 -0.10 0.13 A B 0.20 0.09 C C FRONT VIEW 0.09 MIN NOTES: A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 2009. E. LANDPATTERN STANDARD: SOP65P640X110-14M. F. DRAWING FILE NAME: MKT-MTC14rev7. GAGE PLANE 0.09 MIN 1.00 0.25 SEATING PLANE DETAIL A 8.75 8.50 A 7.62 14 8 14 B 0.65 8 4.00 3.80 6.00 1 PIN #1 IDENT. 1.27 (0.33) TOP VIEW 5.60 7 0.51 0.35 0.25 M C B A 1.75 MAX 1.70 1 1.27 LAND PATTERN RECOMMENDATION A C 1.50 1.25 FRONT VIEW 0.25 0.10 0.50 0.25 x 45 R0.10 GAGE PLANE R0.10 0.36 8° 0° 0.90 0.50 (1.04) 0.10 C 0.25 0.19 SIDE VIEW NOTES: A. CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C B. ALL DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS D. LAND PATTERN STANDARD: SOIC127P600X145-14M E. CONFORMS TO ASME Y14.5M, 2009 D. DRAWING FILENAME: MKT-M14Arev14 SEATING PLANE DETAIL A SCALE 16 : 1 7 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com