74VHC175MTC

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 74VHC175 Quad D-Type Flip-Flop tm Features General Description ■ High Speed: fMAX = 210MHz (Typ.) at VCC = 5V ■ Low power dissipation: ICC = 4µA (Max.) at TA = 25°C The VHC175 is an advanced high-speed CMOS device fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. ■ High noise immunity: VNIH = VNIL = 28% VCC (Min.) ■ Power down protection is provided on all inputs ■ Low noise: VOLP = 0.8V (Max.) ■ Pin and function compatible with 74HC175 The VHC175 is a high-speed quad D-type flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D inputs is stored during the LOW-to-HIGH clock transition. Both true and complemented outputs of each flip-flop are provided. A Master Reset input resets all flipflops, independent of the Clock or D inputs, when LOW. An input protection circuit insures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery backup. This circuit prevents device destruction due to mismatched supply and input voltages. Ordering Information Package Number Package Description 74VHC175M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHC175SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Order Number 74VHC175MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering number. Connection Diagram Pin Description Pin Names ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 Description D0–D3 Data Inputs CP Clock Pulse Input MR Master Reset Input Q0–Q3 True Outputs Q0–Q 3 Complement Outputs www.fairchildsemi.com 74VHC175 Quad D-Type Flip-Flop May 2007 Functional Description The VHC175 consists of four edge-triggered D flip-flops with individual D inputs and Q and Q outputs. The Clock and Master Reset are common. The four flip-flops will store the state of their individual D inputs on the LOW-toHIGH clock (CP) transition, causing individual Q and Q outputs to follow. A LOW input on the Master Reset (MR) will force all Q outputs LOW and Q outputs HIGH independent of Clock or Data inputs. The VHC175 is useful for general logic applications where a common Master Reset and Clock are acceptable. Truth Table IEEE/IEC Inputs @ tn, MR = H Outputs @ tn+1 Dn Qn Qn L L H H H L H = HIGH Voltage Level L = LOW Voltage Level tn = Bit Time before Clock Pulse tn+1 = Bit Time after Clock Pulse Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 2 74VHC175 Quad D-Type Flip-Flop Logic Symbol Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Rating VCC Supply Voltage –0.5V to +7.0V VIN DC Input Voltage –0.5V to +7.0V VOUT DC Output Voltage –0.5V to VCC + 0.5V IIK Input Diode Current –20mA IOK Output Diode Current ±20mA IOUT DC Output Current ±25mA ICC DC VCC / GND Current TSTG TL ±50mA Storage Temperature –65°C to +150°C Lead Temperature (Soldering, 10 seconds) 260°C Recommended Operating Conditions(1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter VCC Supply Voltage VIN Input Voltage VOUT Output Voltage TOPR Operating Temperature tr , tf Rating 2.0V to +5.5V 0V to +5.5V 0V to VCC –40°C to +85°C Input Rise and Fall Time, VCC = 3.3V ± 0.3V 0ns/V ∼ 100ns/V VCC = 5.0V ± 0.5V 0ns/V ∼ 20ns/V Note: 1. Unused inputs must be held HIGH or LOW. They may not float. ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 3 74VHC175 Quad D-Type Flip-Flop Absolute Maximum Ratings TA = –40°C to +85°C TA = 25°C Symbol Parameter VCC (V) VIH HIGH Level Input Voltage 2.0 Conditions Min. 1.50 3.0–5.5 0.7 x VCC VIL LOW Level Input Voltage VOH HIGH Level Output Voltage Max. 3.0 IOH = –50µA LOW Level Output Voltage 2.0 1.9 2.9 3.0 2.9 4.4 4.5 4.4 IOH = –4mA 2.58 2.48 4.5 IOH = –8mA 3.94 3.80 3.0 VIN = VIH or VIL IOL = 50µA 4.5 0.1 0.1 0.0 0.1 0.1 0.0 IOL = 8mA 4.5 V V 0.0 IOL = 4mA 3.0 V 0.3 x VCC 1.9 3.0 2.0 Units 0.50 0.3 x VCC VIN = VIH or VIL Max. 0.7 x VCC 0.50 3.0–5.5 2.0 Min. 1.50 2.0 4.5 VOL Typ. 0.1 0.1 0.36 0.44 V 0.36 0.44 IIN Input Leakage Current 0–5.5 VIN = 5.5V or GND ±0.1 ±1.0 µA ICC Quiescent Supply Current 5.5 VIN = VCC or GND 4.0 40.0 µA Noise Characteristics TA = 25°C Symbol VCC (V) Typ. Limits Units Quiet Output Maximum Dynamic VOL 5.0 0.4 0.8 V CL = 50pF VOLV(2) Quiet Output Minimum Dynamic VOL 5.0 –0.4 –0.8 V CL = 50pF VIHD(2) Minimum HIGH Level Dynamic Input Voltage 5.0 3.5 V CL = 50pF VILD(2) Maximum LOW Level Dynamic Input Voltage 5.0 1.5 V CL = 50pF VOLP (2) Parameter Conditions Note: 2. Parameter guaranteed by design. ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 4 74VHC175 Quad D-Type Flip-Flop DC Electrical Characteristics TA = –40°C to +85°C TA = 25°C Symbol fMAX tPLH, tPHL tPLH, tPHL Parameter Maximum Clock Frequency Propagation Delay Time, (CP to Qn or Qn) Propagation Delay Time, (MR to Qn or Qn) tOSLH, tOSHL Output to Output Skew CIN Input Capacitance CPD Power Dissipation Capacitance VCC (V) Conditions Min. Typ. Max. Min. 3.3 ± 0.3 CL = 15pF 90 140 75 CL = 50pF 50 75 45 5.0 ± 0.5 CL = 15pF 150 210 125 CL = 50pF 85 115 75 Max. Units MHz MHz 3.3 ± 0.3 CL = 15pF 7.5 11.5 1.0 13.5 CL = 50pF 10.0 15.0 1.0 17.0 5.0 ± 0.5 CL = 15pF 4.8 7.3 1.0 8.5 CL = 50pF 6.3 9.3 1.0 10.5 3.3 ± 0.3 CL = 15pF 6.3 10.1 1.0 12.0 CL = 50pF 8.8 13.6 1.0 15.5 5.0 ± 0.5 CL = 15pF 4.3 6.4 1.0 7.5 CL = 50pF 5.8 8.4 1.0 9.5 3.3 ± 0.3 CL = 50pF 5.0 ± 0.5 CL = 50pF(3) VCC (4) = Open 4 1.5 1.5 1.0 1.0 10 10 44 ns ns ns ns pF pF Notes: 3. Parameter guaranteed by design. tOSLH = |tPLHmax – tPLHmin|; tOSHL =| tPHLmax – tPHLmin|. 4. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained from the equation: ICC (opr.) = CPD • VCC • fIN + ICC/4 (per F/F), and the total CPD when n pcs of the Flip-Flop operate can be calculated by the following equation: CPD (total) = 30 + 14 • n AC Operating Requirements TA = 25°C Symbol Parameter tW(L), tW(H) Minimum Pulse Width (CP) tW(L) tS tH tREC Minimum Pulse Width (MR) Minimum Setup Time (Dn to CP) Minimum Hold Time (Dn to CP) Minimum Removal Time (MR) VCC (V)(5) Typ. TA = –40°C to +85°C Guaranteed Minimum 3.3 5.0 5.0 5.0 5.0 5.0 3.3 5.0 5.0 5.0 5.0 5.0 3.3 5.0 5.0 5.0 4.0 4.0 3.3 1.0 1.0 5.0 1.0 1.0 3.3 5.0 5.0 5.0 5.0 5.0 Units ns ns ns ns ns Note: 5. VCC is 3.3 ± 0.3V or 5.0 ± 0.5V ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 5 74VHC175 Quad D-Type Flip-Flop AC Electrical Characteristics 74VHC175 Quad D-Type Flip-Flop Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 1. 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 6 74VHC175 Quad D-Type Flip-Flop Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 2. 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 7 5.00±0.10 4.55 5.90 4.45 7.35 0.65 4.4±0.1 1.45 5.00 0.11 12° MTC16rev4 Figure 3. 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 8 74VHC175 Quad D-Type Flip-Flop Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. ® ACEx Across the board. Around the world.™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ CTL™ Current Transfer Logic™ DOME™ 2 E CMOS™ ® EcoSPARK EnSigna™ FACT Quiet Series™ ® FACT ® FAST FASTr™ FPS™ ® FRFET GlobalOptoisolator™ GTO™ HiSeC™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ MICROCOUPLER™ MicroPak™ MICROWIRE™ Motion-SPM™ MSX™ MSXPro™ OCX™ OCXPro™ ® OPTOLOGIC ® OPTOPLANAR PACMAN™ PDP-SPM™ POP™ ® Power220 ® Power247 PowerEdge™ PowerSaver™ Power-SPM™ ® PowerTrench Programmable Active Droop™ ® QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ ScalarPump™ SMART START™ ® SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ ® The Power Franchise TinyBoost™ TinyBuck™ ® TinyLogic TINYOPTO™ TinyPower™ TinyWire™ TruTranslation™ µSerDes™ ® UHC UniFET™ VCX™ Wire™ ™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Definition Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I26 ©1993 Fairchild Semiconductor Corporation 74VHC175 Rev. 1.2 www.fairchildsemi.com 9 74VHC175 Quad D-Type Flip-Flop TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com