BAS21TMR6
High Voltage Switching
Diode
The BAS21TMR6T1G device houses three high−voltage switching
diodes in a SC−74 surface mount package. This device is ideal for
low−power surface mount applications where board space is at a
premium.
Features
• Reduces Board Space
• NSV Prefix for Automotive and Other Applications Requiring
•
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
www.onsemi.com
250 V
HIGH VOLTAGE
SWITCHING DIODE
6
5
4
1
2
3
MAXIMUM RATINGS (EACH DIODE)
Symbol
Value
Unit
Reverse Voltage
VR
250
Vdc
Forward Current
IF
200
mAdc
IFM(surge)
625
mAdc
Rating
Peak Forward Surge Current
THERMAL CHARACTERISTICS
Characteristic
Total Device Dissipation
FR− 5 Board (Note 1) TA = 25°C
Derate above 25°C
Thermal Resistance,
Junction−to−Ambient
Total Device Dissipation
Alumina Substrate, (Note 2) TA = 25°C
Derate above 25°C
Thermal Resistance,
Junction−to−Ambient
Junction and Storage Temperature
4
6 5
1 2
Symbol
Max
Unit
311
2.5
mW
mW/°C
402
°C/W
347
2.8
mW
mW/°C
RJA
360
°C/W
TJ, Tstg
−55 to
+150
°C
PD
RJA
SC−74
CASE 318F
3
MARKING DIAGRAM
RAA MG
G
PD
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−4 @ 10 mm2, 2 oz copper traces
2. FR−4 @ 25 mm2, 2 oz copper traces
RAA
M
G
= Device Code
= Date Code*
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending
upon manufacturing location.
ORDERING INFORMATION
Package
Shipping†
BAS21TMR6T1G
SC−74
(Pb−Free)
3000 /
Tape & Reel
NSVBAS21TMR6T1G
SC−74
(Pb−Free)
3000 /
Tape & Reel
NSVBAS21TMR6T2G
SC−74
(Pb−Free)
3000 /
Tape & Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2015
September, 2015 − Rev. 1
1
Publication Order Number:
BAS21TMR6/D
BAS21TMR6
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Reverse Voltage Leakage Current
(VR = 200 Vdc)
(VR = 200 Vdc, TJ = 150°C)
Min
Max
Unit
Adc
IR
Reverse Breakdown Voltage (IBR = 100 Adc)
V(BR)
−
−
0.1
100
250
−
−
−
1.0
1.25
Vdc
Forward Voltage
(IF = 100 mAdc)
(IF = 200 mAdc)
VF
Vdc
Diode Capacitance (VR = 0, f = 1.0 MHz)
CD
−
5.0
pF
Reverse Recovery Time (IF = IR = 30 mAdc, IR(REC) = 3.0 mAdc, RL = 100)
trr
−
50
ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
820
+10 V
2.0 k
100 H
tr
0.1 F
IF
tp
t
IF
trr
10%
t
0.1 F
90%
D.U.T.
50 OUTPUT
PULSE
GENERATOR
50 INPUT
SAMPLING
OSCILLOSCOPE
IR(REC) = 3.0 mA
IR
VR
INPUT SIGNAL
OUTPUT PULSE
(IF = IR = 30 mA; MEASURED
at IR(REC) = 3.0 mA)
Notes: 1. A 2.0 k variable resistor adjusted for a Forward Current (IF) of 30 mA.
Notes: 2. Input pulse is adjusted so IR(peak) is equal to 30 mA.
Notes: 3. tp » trr
Figure 1. Recovery Time Equivalent Test Circuit
www.onsemi.com
2
BAS21TMR6
TYPICAL CHARACTERISTICS
10 150°C
100
IR , REVERSE CURRENT (μA)
125°C
85°C
10
55°C
25°C
1.0
-55°C
125°C
1.0
85°C
0.1
55°C
0.01
25°C
-40°C
0.1
0.2
0.3
0.4
0.5
0.6
0.7
VF, FORWARD VOLTAGE (V)
0.8
0.9
0.001
20
1.0
50
80
170
200
110
140
VR, REVERSE VOLTAGE (V)
Figure 2. VF vs. IF
Figure 3. IR vs. VR
1.6
Cap
CD, DIODE CAPACITANCE (pF)
IF, FORWARD CURRENT (mA)
150°C
1.4
1.2
1.0
0.8
0.6
0.4
0
1
2
3
4
5
VR, REVERSE VOLTAGE (V)
Figure 4. Capacitance
www.onsemi.com
3
6
7
8
230
260
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SC−74
CASE 318F
ISSUE P
6
1
SCALE 2:1
DATE 07 OCT 2021
GENERIC
MARKING DIAGRAM*
XXX MG
G
XXX
M
G
= Specific Device Code
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
STYLE 1:
PIN 1. CATHODE
2. ANODE
3. CATHODE
4. CATHODE
5. ANODE
6. CATHODE
STYLE 2:
PIN 1. NO CONNECTION
2. COLLECTOR
3. EMITTER
4. NO CONNECTION
5. COLLECTOR
6. BASE
STYLE 3:
PIN 1. EMITTER 1
2. BASE 1
3. COLLECTOR 2
4. EMITTER 2
5. BASE 2
6. COLLECTOR 1
STYLE 4:
PIN 1. COLLECTOR 2
2. EMITTER 1/EMITTER 2
3. COLLECTOR 1
4. EMITTER 3
5. BASE 1/BASE 2/COLLECTOR 3
6. BASE 3
STYLE 5:
PIN 1. CHANNEL 1
2. ANODE
3. CHANNEL 2
4. CHANNEL 3
5. CATHODE
6. CHANNEL 4
STYLE 7:
PIN 1. SOURCE 1
2. GATE 1
3. DRAIN 2
4. SOURCE 2
5. GATE 2
6. DRAIN 1
STYLE 8:
PIN 1. EMITTER 1
2. BASE 2
3. COLLECTOR 2
4. EMITTER 2
5. BASE 1
6. COLLECTOR 1
STYLE 9:
PIN 1. EMITTER 2
2. BASE 2
3. COLLECTOR 1
4. EMITTER 1
5. BASE 1
6. COLLECTOR 2
STYLE 10:
PIN 1. ANODE/CATHODE
2. BASE
3. EMITTER
4. COLLECTOR
5. ANODE
6. CATHODE
STYLE 11:
PIN 1. EMITTER
2. BASE
3. ANODE/CATHODE
4. ANODE
5. CATHODE
6. COLLECTOR
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42973B
SC−74
STYLE 6:
PIN 1. CATHODE
2. ANODE
3. CATHODE
4. CATHODE
5. CATHODE
6. CATHODE
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative