BC618RL1G

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. BC618 Darlington Transistors NPN Silicon Features • These are Pb−Free Devices* http://onsemi.com COLLECTOR 1 MAXIMUM RATINGS Rating Symbol Value Unit Collector −Emitter Voltage VCEO 55 Vdc Collector −Base Voltage VCBO 80 Vdc Emitter−Base Voltage VEBO 12 Vdc Collector Current − Continuous IC 1.0 Adc Total Power Dissipation @ TA = 25°C Derate above TA = 25°C PD 625 5.0 mW mW/°C Total Power Dissipation @ TA = 25°C Derate above TA = 25°C PD 1.5 12 W mW/°C TJ, Tstg −55 to +150 °C Operating and Storage Junction Temperature Range BASE 2 EMITTER 3 TO−92 CASE 29 STYLE 17 3 STRAIGHT LEAD BULK PACK THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Ambient RqJA 200 °C/W Thermal Resistance, Junction−to−Case RqJC 83.3 °C/W 1 12 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. BC 618 AYWW G G A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Package Shipping† BC618G TO−92 (Pb−Free) 5000 Units / Bulk BC618RL1G TO−92 (Pb−Free) 2000 / Tape & Reel Device *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2007 March, 2007 − Rev. 4 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: BC618/D BC618 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max 55 − − 80 − − 12 − − − − 50 − − 50 − − 50 − − 1.1 − − 1.6 2000 4000 10000 4000 − − − − − − 50000 − 150 − − − 4.5 7.0 − 5.0 9.0 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 10 mAdc, VBE = 0) V(BR)CEO Collector −Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCE = 60 Vdc, VBE = 0) ICES Collector Cutoff Current (VCB = 60 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = 10 Vdc, IC = 0) IEBO Vdc Vdc Vdc nAdc nAdc nAdc ON CHARACTERISTICS DC Current Gain (IC = 200 mA, IB = 0.2 mA) VCE(sat) Base −Emitter Saturation Voltage (IC = 200 mA, IB = 0.2 mA) VBE(sat) DC Current Gain (IC = 100 mA, VCE = 5.0 Vdc) (IC = 10 mA, VCE = 5.0 Vdc) (IC = 200 mA, VCE = 5.0 Vdc) (IC = 1.0 A, VCE = 5.0 Vdc) hFE Vdc Vdc − DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 500 mA, VCE = 5.0 Vdc, P = 100 MHz) fT Output Capacitance (VCB = 10 V, IE = 0, f = 1.0 MHz) Cob Input Capacitance (VEB = 5.0 V, IE = 0, f = 1.0 MHz) Cib RS in en IDEAL TRANSISTOR Figure 1. Transistor Noise Model http://onsemi.com 2 MHz pF pF BC618 NOISE CHARACTERISTICS (VCE = 5.0 Vdc, TA = 25°C) 2.0 BANDWIDTH = 1.0 Hz RS ≈ 0 200 BANDWIDTH = 1.0 Hz i n, NOISE CURRENT (pA) en, NOISE VOLTAGE (nV) 500 100 10 mA 50 100 mA 20 IC = 1.0 mA 10 1.0 0.7 0.5 IC = 1.0 mA 0.3 0.2 100 mA 0.1 0.07 0.05 10 mA 0.03 5.0 10 20 50 100 200 500 1k 2k 5k 10k 20k f, FREQUENCY (Hz) 50k 100k 0.02 10 20 50 100 200 50k 100k Figure 3. Noise Current 14 200 BANDWIDTH = 10 Hz TO 15.7 kHz 12 BANDWIDTH = 10 Hz TO 15.7 kHz 100 NF, NOISE FIGURE (dB) VT, TOTAL WIDEBAND NOISE VOLTAGE (nV) Figure 2. Noise Voltage 500 1k 2k 5k 10k 20k f, FREQUENCY (Hz) IC = 10 mA 70 50 100 mA 30 20 1.0 mA 10 1.0 2.0 10 10 mA 8.0 100 mA 6.0 4.0 IC = 1.0 mA 2.0 5.0 10 20 50 100 200 RS, SOURCE RESISTANCE (kW) 500 0 1.0 1000 Figure 4. Total Wideband Noise Voltage 2.0 5.0 10 20 50 100 200 RS, SOURCE RESISTANCE (kW) Figure 5. Wideband Noise Figure http://onsemi.com 3 500 1000 BC618 SMALL−SIGNAL CHARACTERISTICS 4.0 |h fe |, SMALL−SIGNAL CURRENT GAIN C, CAPACITANCE (pF) 20 TJ = 25°C 10 7.0 Cibo Cobo 5.0 3.0 2.0 0.04 0.1 0.2 0.4 1.0 2.0 4.0 VR, REVERSE VOLTAGE (VOLTS) 10 20 2.0 1.0 0.8 0.6 0.4 0.2 0.5 40 200k hFE, DC CURRENT GAIN TJ = 125°C 25°C 30k 20k 10k 7.0k 5.0k −55 °C VCE = 5.0 V 3.0k 2.0k 5.0 7.0 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500 RθV, TEMPERATURE COEFFICIENTS (mV/°C) TJ = 25°C V, VOLTAGE (VOLTS) 1.4 VBE(sat) @ IC/IB = 1000 1.2 VBE(on) @ VCE = 5.0 V 1.0 VCE(sat) @ IC/IB = 1000 5.0 7.0 10 0.5 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) 500 TJ = 25°C 2.5 IC = 10 mA 50 mA 250 mA 500 mA 2.0 1.5 1.0 0.5 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 IB, BASE CURRENT (mA) 100 200 500 1000 Figure 9. Collector Saturation Region 1.6 0.6 2.0 3.0 Figure 8. DC Current Gain 0.8 1.0 Figure 7. High Frequency Current Gain VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 6. Capacitance 100k 70k 50k VCE = 5.0 V f = 100 MHz TJ = 25°C 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500 −1.0 −2.0 *APPLIES FOR IC/IB ≤ hFE/3.0 25°C TO 125°C *RqVC FOR VCE(sat) −55 °C TO 25°C −3.0 25°C TO 125°C −4.0 qVB FOR VBE −5.0 −55 °C TO 25°C −6.0 5.0 7.0 10 Figure 10. “On” Voltages 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) Figure 11. Temperature Coefficients http://onsemi.com 4 500 BC618 ( ), RESISTANCE (NORMALIZED) 1.0 0.7 0.5 D = 0.5 0.2 0.3 0.2 0.1 0.05 SINGLE PULSE 0.1 0.07 0.05 SINGLE PULSE ZqJC(t) = r(t) • RqJCTJ(pk) − TC = P(pk) ZqJC(t) ZqJA(t) = r(t) • RqJATJ(pk) − TA = P(pk) ZqJA(t) 0.03 0.02 0.01 0.1 0.2 0.5 1.0 2.0 10 5.0 20 50 t, TIME (ms) 100 200 500 1.0k 2.0k 5.0k Figure 12. Thermal Response FIGURE A IC, COLLECTOR CURRENT (mA) 1.0k 700 500 300 200 1.0 ms TA = 25°C TC = 25°C tP PP 100 ms PP 1.0 s 100 70 50 t1 30 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 20 10 0.4 0.6 1/f t DUTYCYCLE + t1f + 1 tP PEAK PULSE POWER = PP 40 1.0 2.0 4.0 6.0 10 20 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Design Note: Use of Transient Thermal Resistance Data Figure 13. Active Region Safe Operating Area http://onsemi.com 5 10k BC618 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C SECTION X−X 1 N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− N A R BENT LEAD TAPE & REEL AMMO PACK B P NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. T SEATING PLANE K D X X G J V 1 C SECTION X−X DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 −−− 2.04 2.66 1.50 4.00 2.93 −−− 3.43 −−− N STYLE 17: PIN 1. COLLECTOR 2. BASE 3. EMITTER ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BC618/D