BDV65B_08

BDV65B (NPN), BDV64B (PNP) Complementary Silicon Plastic Power Darlingtons . . . for use as output devices in complementary general purpose amplifier applications. • High DC Current Gain − HFE = 1000 (min.) @ 5 Adc • Monolithic Construction with Built−in Base Emitter Shunt Resistors • Pb−Free Packages are Available* http://onsemi.com ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Rating Symbol VCEO VCB VEB IC IB Max 100 100 5.0 10 20 Unit Vdc Vdc Vdc Adc Adc Collector−Emitter Voltage Collector−Base Voltage Emitter−Base Voltage Collector Current Base Current − Continuous − Peak 0.5 Total Device Dissipation @ TC = 25_C Derate above 25_C PD 125 1.0 W W/_C _C Operating and Storage Junction Temperature Range TJ, Tstg – 65 to + 150 MAXIMUM RATINGS 10 AMPERE DARLINGTON COMPLEMENTARY SILICON POWER TRANSISTORS 60−80−100−120 VOLTS, 125 WATTS NPN COLLECTOR 2 PNP COLLECTOR 2,4 BASE 1 BASE 1 EMITTER 3 BDV65B EMITTER 3 BDV64B THERMAL CHARACTERISTICS Characteristic Symbol RqJC Max 1.0 Unit Thermal Resistance, Junction−to−Case _C/W MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 1 2 3 A Y WW G BDV6xB SOT−93 (TO−218) CASE 340D AYWW BDV6xBG = = = = = Assembly Location Year Work Week Pb−Free Package Device Code x = 4 or 5 ORDERING INFORMATION Device BDV65B BDV65BG BDV64B BDV64BG Package SOT−93 SOT−93 (Pb−Free) SOT−93 SOT−93 (Pb−Free) Shipping 30 Units / Rail 30 Units / Rail 30 Units / Rail 30 Units / Rail © Semiconductor Components Industries, LLC, 2008 September, 2008 − Rev. 13 1 Publication Order Number: BDV65B/D ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎ Î Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ ÎÎÎ Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎ Î ÎÎÎ Î Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎ Î Î Î Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS ON CHARACTERISTICS OFF CHARACTERISTICS Base−Emitter Saturation Voltage (IC = 5.0 Adc, VCE = 4.0 Vdc) Collector−Emitter Saturation Voltage (IC = 5.0 Adc, IB = 0.02 Adc) DC Current Gain (IC = 5.0 Adc, VCE = 4.0 Vdc) Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) Collector Cutoff Current (VCB = 50 Vdc, IE = 0, TC = 150_C) Collector Cutoff Current (VCB = 100 Vdc, IE = 0) Collector Cutoff Current (VCE = 50 Vdc, IB = 0) Collector−Emitter Sustaining Voltage (1) (IC = 30 mAdc, IB = 0) Characteristic 0.2 0 0 25 DERATING FACTOR 0.8 0.4 0.6 1.0 BDV65B (NPN), BDV64B (PNP) Figure 1. Power Derating http://onsemi.com 50 100 75 TC, CASE TEMPERATURE (°C) 125 VCEO(sus) Symbol VCE(sat) VBE(on) ICBO ICBO ICEO IEBO hFE 150 1000 Min 100 − − − − − − Max 2.5 2.0 5.0 2.0 0.4 1.0 − − mAdc mAdc mAdc mAdc Unit Vdc Vdc Vdc − 2 BDV65B (NPN), BDV64B (PNP) NPN 10K VCE = 4 V hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN PNP 10K 1K 1K 4 0.1 1 IC, COLLECTOR CURRENT (A) 10 1 0.1 1 IC, COLLECTOR CURRENT (A) 10 Figure 2. DC Current Gain 10 10 Figure 3. DC Current Gain V, VOLTAGE (V) 1 VBE(sat) @ IC/IB = 250 V, VOLTAGE (V) 1 VBE(sat) @ IC/IB = 250 0.1 0.1 1 IC, COLLECTOR CURRENT (A) 10 0.1 0.1 1 IC, COLLECTOR CURRENT (A) 10 Figure 4. “On” Voltages Figure 5. “On” Voltages 100 50 IC, COLLECTOR CURRENT (A) 20 dc SECONDARY BREAKDOWN LIMITED @ TJ v 150°C THERMAL LIMIT @ TC = 25°C BONDING WIRE LIMIT BDV65B, BDV64B 1 10 50 30 VCE, COLLECTOR-EMITTER VOLTAGE (V) 100 100 μs 5.0 ms 1.0 ms 10 5 1 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC − VCE limits of the transistor that must be observed for reliable operation i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 6 is based on TJ(pk) = 150_C, TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) v 150_C. TJ(pk) may be calculated from the data in Figure 7. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. Figure 6. Active Region Safe Operating Area http://onsemi.com 3 BDV65B (NPN), BDV64B (PNP) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.5 D = 0.5 0.2 0.1 0.05 0.03 0.2 0.1 0.05 0.02 0.01 t1 t2 (SINGLE PULSE) 0.05 0.1 0.5 1.0 5 t, TIME (ms) DUTY CYCLE, D = t1/t2 10 50 P(pk) ZθJC(t) = r(t) RθJC RθJC = 1.0°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZθJC(t) 100 500 1000 0.01 0.01 Figure 7. Thermal Response PACKAGE DIMENSIONS SOT−93 (TO−218) CASE 340D−02 ISSUE E C B Q E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. MILLIMETERS MIN MAX --20.35 14.70 15.20 4.70 4.90 1.10 1.30 1.17 1.37 5.40 5.55 2.00 3.00 0.50 0.78 31.00 REF --16.20 4.00 4.10 17.80 18.20 4.00 REF 1.75 REF INCHES MIN MAX --0.801 0.579 0.598 0.185 0.193 0.043 0.051 0.046 0.054 0.213 0.219 0.079 0.118 0.020 0.031 1.220 REF --0.638 0.158 0.161 0.701 0.717 0.157 REF 0.069 U S K L 1 2 4 A 3 D V G J H DIM A B C D E G H J K L Q S U V ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 4 BDV65B/D