CPH5512-TL-E

Ordering number : EN7310B CPH5512 PIN Diode http://onsemi.com Dual parallel PIN Diode for VHF, UHF and AGC 50V, 50mA, rs=typ 5Ω, CPH5 Features • • • Composite type with 2 diodes contained in a CPH package currently in use, improving the mounting efficiency greatly Small interterminal capacitance (C=0.23pF typ) Small forward series resistance (rs=5Ω typ) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Reverse Voltage VR 50 V Forward Current 50 A Allowable Power Dissipation IF P 350 V Junction Temperature Tj 125 °C Storage Temperature Tstg --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Product & Package Information unit : mm (typ) 7017A-001 • Package : CPH5 • JEITA, JEDEC : SC-74A, SOT-25 • Minimum Packing Quantity : 3,000 pcs./reel 4 CPH5512-TL-E 0.15 2.9 5 3 Packing Type : TL Marking 0.9 1 2 0.95 0.4 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode LOT No. 2B 0.05 1.6 0.2 0.6 2.8 0.2 0.6 Package Dimensions TL Electrical Connection 5 4 3 CPH5 1 Semiconductor Components Industries, LLC, 2013 September, 2013 2 60612 TKIM/D2408KR MSIM TC-00001789/O1002 TSIM TA-3701 No.7310-1/6 CPH5512 Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage Forward Voltage VR IR VF Interterminal Capacitance C IF=50mA VR=50V, f=1MHz SeriesResistance rs IF=10mA, f=100MHz Reverse Current Ratings Conditions min IR=10μA VR=50V typ Unit max 50 V 0.1 μA 0.95 V 0.23 pF 5 Ω The specifications shown above are for each individual diode. Ordering Information Device CPH5512-TL-E Shipping memo CPH5 3,000pcs./reel Pb Free IF -- VF C --55 ° Ta = 1.0 7 5 3 2 25° C 12 5° C 10 7 5 3 2 0.1 7 5 3 2 0.01 0 0.2 0.4 0.6 C -- VR 2 Interterminal Capacitance, C -- pF 100 7 5 3 2 Forward Current, IF -- mA Package 0.8 Forward Voltage, VF -- V 1.0 1.2 ID00032 Ta=25°C f=1MHz 1.0 7 5 3 2 0.1 0.1 2 3 5 7 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 2 3 5 7 100 ID00033 No.7310-2/6 CPH5512 IR -- VR 100 rs -- f 10k Ta=25°C 7 7 5 5 3 Ta C =100° 3 2 2 10 1k 7 7 5 IF =10 μA 5 3 Series Resistance, rs -- Ω Reverse Current, IR -- nA 75°C 2 1.0 7 50°C 5 3 100 7 5 0.1 10 7 5 5 3 3 2 2 0.01 0 10 20 1mA 3 2 25°C 100μA 2 2 7 30 40 Reverse Voltage, VR -- V 50 ID00034 1.0 1.0 10mA 2 3 5 7 10 2 3 5 7 100 Frequency, f -- MHz 2 3 5 7 1000 ID00035 rs -- IF 2 Series Resistance, rs -- Ω 3 Ta=25°C f=100MHz 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Forward Current, IF -- mA 2 3 5 7 10 ID00036 No.7310-3/6 CPH5512 Embossed Taping Specification CPH5512-TL-E No.7310-4/6 CPH5512 Outline Drawing CPH5512-TL-E Land Pattern Example Mass (g) Unit 0.02 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.7310-5/6 CPH5512 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.7310-6/6