FAN48630BUC31JX

FAN48630J 2.5 MHz, 1500 mA, Synchronous TinyBoost Regulator with Bypass Mode     The FAN48630J allows systems to take advantage of new battery chemistries that can supply significant energy when the battery voltage is lower than the required voltage for system power ICs. By combining built-in power transistors, synchronous rectification, and low supply current; this IC provides a compact solution for systems using advanced Li-Ion battery chemistries. The FAN48630J is a boost regulator designed to provide a minimum output voltage (VOUT(MIN)) from a single-cell Li-Ion battery, even when the battery voltage is below system minimum. Output voltage regulation is guaranteed to a maximum load current of 1500 mA. Quiescent current in Shutdown Mode is less than 3 µA, which maximizes battery life. The regulator transitions smoothly between Bypass and normal Boost Mode. The device can be forced into Bypass Mode to reduce quiescent current. The FAN48630J is available in a 16-bump, 0.4 mm pitch, Wafer-Level Chip-Scale Package (WLCSP). Features               3 External Components: 0.47 µH Inductor and 0603 Case Size Input and Output Capacitors  Input Voltage Range: 2.35 V to 5.5 V  Fixed Output Voltage Option: 3.15 V/3.6 V  Up to 96%   True Bypass Operation when VIN > Target VOUT  Internal Synchronous Rectifier  Soft‐Start with True Load Disconnect  Forced Bypass Mode   VSEL Control to Optimize Target VOUT  Short‐Circuit Protection   Low Operating Quiescent Current  16‐Bump, 0.4 mm Pitch WLCSP     Product   FAN48630BUC31JX  Product & Eco Status  Full Production  Green as of Nov 2014   China RoHS  Qualification Support  ESD (HBM)4000V RƟJA 80°C/W Moisture Sensitivity Level (MSL)1 Max Reflow Temp 260 https://www.fairchildsemi.com/products/power-management/non-isolated-dc-dc/step-down-... 3/2/2017