Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FAN7602C
Green Current Mode PWM Controller
Features
Description
Green Current Mode PWM Controller
The FAN7602C is a green current-mode PWM controller.
It is specially designed for off-line adapter applications;
DVDP, VCR, LCD monitor applications; and auxiliary
power supplies.
Random Frequency Fluctuation for Low EMI
Internal High-Voltage Startup Switch
Burst Mode Operation
Line Voltage Feedforward to Limit Maximum Power
Line Under-Voltage Protection
Latch Protection & Internal Soft-Start (10ms) Function
Overload Protection (OLP)
The internal high-voltage startup switch and the burst
mode operation reduce the power loss in standby mode.
As a result, the input power is lower than 1 W when the
input line voltage is 265 VAC and the load is 0.5 W. At
no-load condition, input power is under 0.15 W.
The maximum power can be limited constantly,
regardless of the line voltage change, using the power
limit function.
Over-Voltage Protection (OVP)
Over-Temperature Protection (OTP)
Low Operation Current: 1 mA Typical
The switching frequency is not fixed and has random
frequency fluctuation.
Available in the 8-Lead SOP Package
The FAN7602C includes various protections for the
system reliability and the internal soft-start prevents the
output voltage over-shoot at startup.
Applications
Adapter
LCD Monitor Power
Auxiliary Power Supply
Related Resources
AN-6014- Green Current Mode PWM Controller
(Except for frequency fluctuation part in AN-6014)
Ordering Information
Part Number
Operating Junction
Temperature
Package
Packing Method
Top Mark
FAN7602CMX
-40°C to +150°C
8-Lead Small Outline Package (SOP)
Tape and Reel
FAN7602C
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
FAN7602C — Green Current Mode PWM Controller
November 2013
FAN7602C — Green Current Mode PWM Controller
Typical Application Diagram
VSTR
LUVP
Latch/
Plimit
CS/FB
NC
FAN7602C
GND
VCC
Out
Figure 1. Typical Flyback Application
Internal Block Diagram
VSTR
8
6 VCC
LUVP
LUVP 1
OVP
OLP
2V/1.5V
SS End
Auto Restart
Protection
TSD
19V
5V Ref
OVP
Latch
12V/8V
Reset
Circuit
Latch
Protection
UVLO
VCC
10ms
Soft-Start
Driver
Circuit
SS End
Plimit
Offset
PWM
Block
OSC
5 OUT
Delay
Circuit
Random
3 CS/FB
0.95V/0.88V
Latch/
2
Plimit
Latch
PWM+
OLP
SoftStart
4V
Plimit
Offset
Generator
Plimit
Offset
Power Limit
Plimit
Offset
OLP
4 GND
Soft-Start
Figure 2. Functional Block Diagram
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
2
VSTR
NC
VCC
Out
8
7
6
5
FAN7602C
YWW
1
2
3
4
LUVP
Latch/
Plimit
CS/FB
GND
Figure 3. Pin Configuration (Top View)
Pin Definitions
Pin #
Name
Description
1
LUVP
2
Latch/Plimit
3
CS/FB
4
GND
Ground Pin. This pin is used for the ground potential of all the pins. For proper operation,
the signal ground and the power ground should be separated.
5
OUT
Gate Drive Output Pin. This pin is an output pin to drive an external MOSFET. The peak
sourcing current is 450 mA and the peak sinking current is 600 mA. For proper operation,
the stray inductance in the gate driving path must be minimized.
6
VCC
Supply Voltage Pin. IC operating current and MOSFET driving current are supplied
using this pin.
7
NC
No Connection.
8
VSTR
Startup Pin. This pin is used to supply IC operating current during IC startup. After
startup, the internal JFET is turned off to reduce power loss.
Line Under-Voltage Protection Pin. This pin is used to protect the set when the input
voltage is lower than the rated input voltage range.
Latch Protection and Power Limit Pin. When the pin voltage exceeds 4 V, the latch
protection works. The latch protection is reset when the VCC voltage is lower than 5 V. For
the power limit function, the OCP level decreases as the pin voltage increases.
Current Sense and Feedback Pin. This pin is used to sense the MOSFET current for
the current mode PWM and OCP. The output voltage feedback information and the
current sense information are added using an external RC filter.
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
3
FAN7602C — Green Current Mode PWM Controller
Pin Configuration
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In
addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
25
V
VCC
Supply Voltage
IO
Output Current
-600
+450
mA
VCS/FB
CS/FB Input Voltage
-0.3
20.0
V
VLUVP
LUVP Input Voltage
-0.3
10.0
V
VLatch
Latch/Plimit Input Voltage
-0.3
10.0
V
VSTR
VSTR Input Voltage
600
V
TJ
TSTG
PD
ESD
Junction Temperature
+150
°C
Recommended Operating Junction Temperature
-40
+150
Storage Temperature Range
-55
+150
°C
1.2
W
Power Dissipation
Electrostatic Discharge Capability
Human Body Model, JESD22-A114
3500
Charged Device Model, JESD22-C101
2000
V
Thermal Impedance
Symbol
θJA
Parameter
(1)
Thermal Resistance , Junction-to-Ambient
Value
Unit
150
°C/W
Note:
1. Regarding the test environment and PCB type, please refer to JESD51-2 and JESD51-10.
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
4
FAN7602C — Green Current Mode PWM Controller
Absolute Maximum Ratings
VCC = 14V, TA = -25°C~125°C, unless otherwise specified.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
VSTR = 30 V, TA = 25°C
0.7
1.0
1.4
mA
Startup Section
ISTR
VSTR Startup Current
Under Voltage Lock Out Section
Vth_start
Start Threshold Voltage
VCC Increasing
11
12
13
V
Vth_stop
Stop Threshold Voltage
VCC Decreasing
7
8
9
V
HY_UVLO
UVLO Hysteresis
3.6
4.0
4.4
V
Supply Current Section
IST
Startup Supply Current
TA = 25°C
250
320
µA
ICC
Operating Supply Current
Output Not Switching
1.0
1.5
mA
5
10
15
ms
59
65
73
kHz
Soft-Start Section
tSS
Soft-Start Time
(2)
PWM Section
fOSC
Operating Frequency
∆fOSC
Frequency Fluctuation
VCS/FB1
tD
VCS/FB = 0.2 V, TA = 25°C
(2)
±3
CS/FB Threshold Voltage
Propagation Delay to Output
DMAX
Maximum Duty Cycle
DMIN
Minimum Duty Cycle
TA = 25°C
0.9
(2)
70
kHz
1.0
1.1
V
100
150
ns
75
80
%
0
%
Burst Mode Section
VCS/FB2
Burst On Threshold Voltage
TA = 25°C
0.84
0.95
1.06
V
VCS/FB3
Burst Off Threshold Voltage
TA = 25°C
0.77
0.88
0.99
V
VLatch/Plimit = 2 V, TA = 25°C
0.12
0.16
0.20
11.5
12.0
14.0
V
Power Limit Section
KPlimit
Offset Gain
Output Section
VOH
Output Voltage High
TA = 25°C, Isource = 100 mA
VOL
Output Voltage Low
TA = 25°C, Isink = 100 mA
1.0
2.5
V
(2)
TA = 25°C, CL = 1 nF
45
150
ns
(2)
TA = 25°C, CL= 1 nF
35
150
ns
tR
Rising Time
tF
Falling Time
Continued on the following page…
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
5
FAN7602C — Green Current Mode PWM Controller
Electrical Characteristics
VCC = 14V, TA = -25°C~125°C, unless otherwise specified.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
3.6
4.0
4.4
V
20
22
24
ms
30
37
44
ms
0
0.1
V
Protection Section
VLATCH
tOLP
tOLP_ST
VOLP
Latch Voltage
Overload Protection Time
(2)
Overload Protection Time at
Startup
Overload Protection Level
VLUVPoff
Line Under-Voltage Protection
On to Off
TA = 25°C
1.9
2.0
2.1
V
VLUVPon
Line Under-Voltage Protection
Off to On
TA = 25°C
1.4
1.5
1.6
V
Over-Voltage Protection
TA = 25°C
18
19
20
V
VOVP
TSD
Shutdown Temperature
(2)
HYS
170
°C
60
°C
Note:
2. These parameters, although guaranteed, are not 100% tested in production.
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
6
FAN7602C — Green Current Mode PWM Controller
Electrical Characteristics (Continued)
1.20
1.15
1.15
1.10
1.10
Normalized
1.20
1.05
1.00
0.95
1.05
1.00
0.95
0.90
0.90
0.85
0.85
0.80
0.80
-50
-25
0
25
50
75
100
-50
125
-25
0
25
50
75
100
125
Temperature [°C]
Figure 5. Stop Threshold Voltage vs. Temperature
1.20
1.40
1.15
1.30
1.10
1.20
Normalized
Normalized
Figure 4. Start Threshold Voltage vs. Temperature
1.05
1.00
0.95
1.10
1.00
0.90
0.90
0.80
0.85
0.70
0.80
0.60
-50
-25
0
25
50
75
100
-50
125
-25
0
Figure 6. UVLO Hysteresis vs. Temperature
50
75
100
125
Figure 7. Startup Threshold Current vs. Temperature
1.50
1.20
1.40
1.15
1.30
1.10
Normalized
Normalized
25
Temperature [°C]
Temperature [°C]
1.20
1.10
1.00
1.05
1.00
0.95
0.90
0.90
0.85
0.80
0.80
-50
-25
0
25
50
75
100
-50
125
0
25
50
75
100
125
Temperature [°C]
Temperature [°C]
Figure 8. Operating Supply Current vs. Temperature
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
-25
Figure 9. VSTR Startup Current vs. Temperature
www.fairchildsemi.com
7
FAN7602C — Green Current Mode PWM Controller
Typical Performance Characteristics
1.20
1.20
1.15
1.15
1.10
CSFB2
CSFB3
1.05
Normalized
Normalized
1.10
1.00
0.95
1.05
1.00
0.95
0.90
0.90
0.85
0.85
0.80
0.80
-50
-25
0
25
50
75
100
125
-50
-25
0
50
75
100
125
Figure 11. Operating Frequency vs. Temperature
1.20
1.20
1.15
1.15
1.10
1.10
Normalized
Normalized
Figure 10. Burst On/Off Voltage vs. Temperature
1.05
1.00
0.95
1.05
1.00
0.95
0.90
0.90
0.85
0.85
0.80
0.80
-50
-25
0
25
50
75
100
-50
125
-25
0
25
50
75
100
125
Temperature [°C]
Temperature [°C]
Figure 12. Offset Gain vs. Temperature
Figure 13. Maximum Duty Cycle vs. Temperature
1.20
1.20
1.15
1.15
1.10
1.10
Normalized
Normalized
25
Temperature [°C]
Temperature [°C]
1.05
1.00
0.95
1.05
1.00
0.95
0.90
0.90
0.85
0.85
0.80
0.80
-50
-25
0
25
50
75
100
-50
125
Figure 14. OVP Voltage vs. Temperature
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
-25
0
25
50
75
100
125
Temperature [°C]
Temperature [°C]
Figure 15. Latch Voltage vs. Temperature
www.fairchildsemi.com
8
FAN7602C — Green Current Mode PWM Controller
Typical Performance Characteristics (Continued).
1.20
1.15
1.15
1.10
1.10
Normalized
Normalized
1.20
1.05
1.00
0.95
1.05
1.00
0.95
0.90
0.90
0.85
0.85
0.80
0.80
-50
-25
0
25
50
75
100
-50
125
-25
0
25
50
75
100
125
Temperature [°C]
Temperature [°C]
Figure 16. LUVP On-to-Off Voltage vs. Temperature
Figure 17. LUVP Off-to-On Voltage vs. Temperature
1.20
1.15
Normalized
1.10
1.05
1.00
0.95
0.90
0.85
0.80
-50
-25
0
25
50
75
100
125
Temperature [°C]
Figure 18. CS/FB Threshold Voltage vs. Temperature
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
9
FAN7602C — Green Current Mode PWM Controller
Typical Performance Characteristics (Continued)
IDS
1. Startup Circuit and Soft-Start Block
tSW=1/fSW
The FAN7602C contains a startup switch to reduce the
power loss of the external startup circuit of the
conventional PWM converters. The internal startup
circuit charges the VCC capacitor with 0.9 mA current
source if the AC line is connected. The startup switch is
turned off 15 ms after IC starts up, as shown in Figure
19. The soft-start function starts when the VCC voltage
reaches the start threshold voltage of 12 V and ends
when the internal soft-start voltage reaches 1 V. The
internal startup circuit starts charging the VCC capacitor
again if the VCC voltage is lowered to the minimum
operating voltage, 8 V. The UVLO block shuts down the
output drive circuit and some blocks to reduce the IC
operating current and the internal soft-start voltage
drops to zero. If the VCC voltage reaches the start
threshold voltage, the IC starts switching again and the
soft-start block works as well.
tSW
∆t
fSW
Figure 20. Frequency Fluctuation Waveform
3. Current Sense and Feedback Block
The FAN7602C performs the current sensing for the
current mode PWM and the output voltage feedback
with only one pin, pin 3. To achieve the two functions
with one pin, an internal Leading-Edge Blanking (LEB)
circuit to filter the current sense noise is not included
because the external RC filter is necessary to add the
output voltage feedback information and the current
sense information.
Figure 21 shows the current sense and feedback circuits.
RS is the current sense resistor to sense the switch
current. The current sense information is filtered by an
RC filter composed of RF and CF. According to the
output voltage feedback information, IFB charges or
stops charging CF to adjust the offset voltage. If IFB is
zero, CF is discharged through RF and RS to lower the
offset voltage.
Startup
Current
Soft-Start
Voltage
VCC
t
5ms
PWM
Comparator
PWM+
Figure 19. Startup Current and VCC Voltage
Soft-Start
2. Oscillator Block
Plimit
Offset
RFB
Power
Limit
CS/FB
IFB
RF
Isw
3
The oscillator frequency is set internally and FAN7602C
has a random frequency fluctuation function.
CF
RS
Fluctuation of the switching frequency of a switched
power supply can reduce EMI by spreading the energy
over a wider frequency range than the bandwidth
measured by the EMI test equipment. The amount of
EMI reduction is directly related to the range of the
frequency variation. The range of frequency variation is
fixed internally; however, its selection is randomly
chosen by the combination of external feedback voltage
and internal free-running oscillator. This randomly
chosen switching frequency effectively spreads the EMI
noise nearby switching frequency and allows the use of
a cost-effective inductor instead of an AC input line filter
to satisfy the world-wide EMI requirements.
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
MAX
fSW-1/2∆fSW
t
VCC
Soft-Start
Time (10ms)
MAX
no repetition
8V
1.5V
1V
0.5V
t
fSW+1/2∆fSW
several
miliseconds
During the soft-start, pulse-width modulated (PWM)
comparator compares the CS/FB pin voltage with the
soft-start voltage. The soft-start voltage starts from 0.5 V
and the soft-start ends when it reaches 1 V and the softstart time is 10 ms. The startup switch is turned off when
the soft-start voltage reaches 1.3 V.
12V
several
µseconds
Figure 21. Current Sense and Feedback Circuits
Figure 22 shows typical voltage waveforms of the CS/FB
pin. The current sense waveform is added to the offset
voltage, as shown in the Figure 22. The CS/FB pin
voltage is compared with PWM that is 1 V - Plimit offset.
If the CS/FB voltage meets PWM+, the output drive is
shut off. If the feedback offset voltage is LOW, the
switch on-time is increased. If the feedback offset
voltage is HIGH, the switch on-time is decreased. In this
way, the duty cycle is controlled according to the output
load condition. Generally, the maximum output power
increases as input voltage increases because the
current slope during switch on-time increases.
www.fairchildsemi.com
10
FAN7602C — Green Current Mode PWM Controller
Application Information
1V
5.1 Overload Protection (OLP)
The FAN7602C contains the overload protection
function. If the output load is higher than the rated
output current, the output voltage drops and the
feedback error amplifier is saturated. The offset of the
CS/FB voltage representing the feedback information is
almost zero. As shown in Figure 24, the CS/FB voltage
is compared with 50 mV reference when the internal
clock signal is HIGH and, if the voltage is lower than
50 mV, the OLP timer starts counting. If the OLP
condition persists for 22 ms, the timer generates the
OLP signal. The protection is reset by the UVLO. The
OLP block is enabled after the soft-start finishes.
Power Limit
Offset
PWM+
CS/FB
Clock
OLP
FB
Offset
3 CS/FB
22ms
Timer
50mV
Soft-Start
GND
On Time
Figure 24. Overload Protection Circuit
(a) Low Power Limit Offset Case
1V
5.2 Line Under-Voltage Protection
If the input voltage of the converter is lower than the
minimum operating voltage, the converter input current
increases too much, causing components failure.
Therefore, if the input voltage is LOW, the converter
should be protected. The LUVP circuit senses the input
voltage using the LUVP pin and, if this voltage is lower
than 2 V, the LUVP signal is generated. The comparator
has 0.5 V hysteresis. If the LUVP signal is generated,
the output drive block is shut down, the output voltage
feedback loop is saturated, and the OLP works if the
LUVP condition persists more than 22 ms.
Power Limit
Offset
PWM+
CS/FB
FB
Offset
GND
On Time
(b) High Power Limit Offset Case
Figure 22. CS/FB Pin Voltage Waveforms
VIN
4. Burst-Mode Block
The FAN7602C contains the burst-mode block to reduce
the power loss at a light-load and no load. A hysteresis
comparator senses the offset voltage of the Burst+ for
the burst mode, as shown in Figure 23. The Burst+ is
the sum of the CS/FB voltage and Plimit offset voltage.
The FAN7602C enters the burst mode when the offset
voltage of the Burst+ is higher than 0.95 V and exits the
burst mode when the offset voltage is lower than 0.88 V.
The offset voltage is sensed during the switch off time.
1
+
−
Burst+
LUVP
2V/1.5V
Figure 25. Line UVP Circuit
5.3 Latch Protection
The latch protection is provided to protect the system
against abnormal conditions using the Latch/Plimit pin.
The Latch/Plimit pin can be used for the output overvoltage protection and/or other protections. If the Latch/
Plimit pin voltage is made higher than 4 V by an external
circuit, the IC is shut down. The latch protection is reset
when the VCC voltage is lower than 5 V.
Offset
Delay
Circuit
−
+
3 CS/FB
0.95V/0.88V
5.4 Over-Voltage Protection (OVP)
If the VCC voltage reaches 19 V, the IC shuts down and
the OVP protection is reset when the VCC voltage is
lower than 5 V.
Figure 23. Burst-Mode Block
5. Protection Block
The FAN7602C contains several protection functions to
improve system reliability.
© 2009 Fairchild Semiconductor Corporation
FAN7602C • Rev. 1.0.1
www.fairchildsemi.com
11
FAN7602C — Green Current Mode PWM Controller
To limit the output power of the converter constantly, the
power limit function is included in FAN7602C. Sensing
the converter input voltage through the Latch/Plimit pin,
the Plimit offset voltage is subtracted from 1 V. As
shown in Figure 22, the Plimit offset voltage is
subtracted from 1 V and the switch on-time decreases
as the Plimit offset voltage increases. If the converter
input voltage increases, the switch on-time decreases,
keeping the output power constant. The offset voltage is
proportional to the Latch/Plimit pin voltage and the gain
is 0.16. If the Latch/Plimit voltage is 1 V, the offset
voltage is 0.16 V.
The FAN7602C contains a single totem-pole output
stage to drive a power MOSFET. The drive output is
capable of up to 450 mA sourcing current and 600 mA
Typical Application Circuit
Application
Output Power
Input Voltage
Output Voltage
Adaptor
48 W
Universal Input (85 ~ 265 VAC)
12V
Features
Low stand-by power (