Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FDBL0090N40
N-Channel PowerTrench® MOSFET
40 V, 240 A, 0.9 mΩ
Features
Typical RDS(on) = 0.65 mΩ at VGS = 10V, ID = 80 A
Typical Qg(tot) = 144 nC at VGS = 10V, ID = 80 A
D
UIS Capability
RoHS Compliant
Applications
Industrial Motor Drive
G
Industrial Power Supply
Industrial Automation
Battery Operated tools
S
Battery Protection
For current package drawing, please refer to the Fairchild web‐
site at https://www.fairchildsemi.com/evaluate/package‐spec‐
ifications/packageDetails.html?id=PN_PSOFA‐008
Solar Inverters
UPS and Energy Inverters
Energy Storage
Load Switch
MOSFET Maximum Ratings TJ = 25°C unless otherwise noted.
Symbol
VDSS
Drain-to-Source Voltage
VGS
ID
EAS
PD
Parameter
Gate-to-Source Voltage
Ratings
40
Units
V
±20
V
Drain Current - Continuous (VGS=10) (Note 1)
TC = 25°C
240
Pulsed Drain Current
TC = 25°C
See Figure 4
Single Pulse Avalanche Energy
(Note 2)
A
737
mJ
Power Dissipation
357
W
Derate Above 25oC
2.38
W/oC
TJ, TSTG Operating and Storage Temperature
o
-55 to + 175
RθJC
Thermal Resistance, Junction to Case
RθJA
Maximum Thermal Resistance, Junction to Ambient
o
0.42
(Note 3)
C
C/W
oC/W
43
Notes:
1: Current is limited by bondwire configuration.
2: Starting TJ = 25°C, L = 0.36mH, IAS = 64A, VDD = 40V during inductor charging and VDD = 0V during time in avalanche.
3: RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance, where the case thermal reference is defined as the solder
mounting surface of the drain pins. RθJC is guaranteed by design, while RθJAis determined by the board design. The maximum rating
presented here is based on mounting on a 1 in2 pad of 2oz copper.
Package Marking and Ordering Information
Device Marking
FDBL0090N40
Device
FDBL0090N40
©2014 Fairchild Semiconductor Corporation
FDBL0090N40 Rev.C2
Package
MO-299A
-
1
-
-
www.fairchildsemi.com
FDBL0090N40 N-Channel PowerTrench® MOSFET
November 2014
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Units
Off Characteristics
BVDSS
Drain-to-Source Breakdown Voltage
IDSS
Drain-to-Source Leakage Current
IGSS
Gate-to-Source Leakage Current
ID = 250μA, VGS = 0V
VDS = 40V,
VGS = 0V
40
-
-
V
-
-
1
μA
-
-
1
mA
-
-
±100
nA
TJ = 25oC
TJ = 175oC (Note 4)
VGS = ±20V
On Characteristics
VGS(th)
RDS(on)
Gate to Source Threshold Voltage
Drain to Source On Resistance
VGS = VDS, ID = 250μA
ID = 80A,
VGS= 10V
2.0
3.3
4.0
V
-
0.65
0.90
mΩ
-
1.10
1.50
mΩ
TJ = 25oC
TJ = 175oC (Note 4)
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate Resistance
f = 1MHz
Qg(ToT)
Total Gate Charge at 10V
VGS = 0 to 10V
Qg(th)
Threshold Gate Charge
VGS = 0 to 2V
Qgs
Gate-to-Source Gate Charge
Qgd
Gate-to-Drain “Miller“ Charge
-
VDS = 25V, VGS = 0V,
f = 1MHz
VDD = 32V
ID = 80A
-
12000
-
pF
-
3260
-
pF
-
442
-
pF
-
3.3
-
Ω
-
144
188
nC
-
22
26
nC
-
66
-
nC
16
-
nC
ns
Switching Characteristics
ton
Turn-On Time
-
-
162
td(on)
Turn-On Delay
-
42
-
ns
tr
Rise Time
-
73
-
ns
td(off)
Turn-Off Delay
-
83
-
ns
tf
Fall Time
-
50
-
ns
toff
Turn-Off Time
-
-
279
ns
V
VDD = 20V, ID = 80A,
VGS = 10V, RGEN = 6Ω
Drain-Source Diode Characteristics
VSD
Source-to-Drain Diode Voltage
trr
Reverse-Recovery Time
Qrr
Reverse-Recovery Charge
ISD =80A, VGS = 0V
-
-
1.25
ISD = 40A, VGS = 0V
-
-
1.2
V
IF = 80A, dISD/dt = 100A/μs,
VDD=32V
-
111
129
ns
-
178
214
nC
Note:
4: The maximum value is specified by design at TJ = 175°C. Product is not tested to this condition in production.
FDBL0090N40 Rev.C2
2
www.fairchildsemi.com
FDBL0090N40 N-Channel PowerTrench® MOSFET
Electrical Characteristics TJ = 25°C unless otherwise noted.
600
1.0
500
ID, DRAIN CURRENT (A)
POWER DISSIPATION MULTIPLIER
1.2
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
150
TC, CASE TEMPERATURE(oC)
CURRENT LIMITED
BY PACKAGE
VGS = 10V
CURRENT LIMITED
BY SILICON
400
300
200
100
0
175
25
50
75
100
125
150
175
TC, CASE TEMPERATURE(oC)
200
Figure 2. Maximum Continuous Drain Current vs.
Case Temperature
Figure 1. Normalized Power Dissipation vs. Case
Temperature
NORMALIZED THERMAL
IMPEDANCE, ZθJC
2
1
DUTY CYCLE - DESCENDING ORDER
D = 0.50
0.20
0.10
0.05
0.02
0.01
0.1
PDM
t1
t2
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + TC
SINGLE PULSE
0.01
-5
10
-4
10
-3
-2
-1
0
10
10
10
t, RECTANGULAR PULSE DURATION(s)
1
10
10
Figure 3. Normalized Maximum Transient Thermal Impedance
10000
VGS = 10V
TC = 25oC
IDM, PEAK CURRENT (A)
FOR TEMPERATURES
ABOVE 25oC DERATE PEAK
CURRENT AS FOLLOWS:
1000
I = I2
175 - TC
150
100
SINGLE PULSE
10
-5
10
-4
10
-3
-2
-1
10
10
10
t, RECTANGULAR PULSE DURATION(s)
0
10
1
10
Figure 4. Peak Current Capability
FDBL0090N40 Rev.C2
3
www.fairchildsemi.com
FDBL0090N40 N-Channel PowerTrench® MOSFET
Typical Characteristics
100
100us
OPERATION IN THIS
AREA MAY BE
LIMITED BY rDS(on)
10
1
1ms
SINGLE PULSE
TJ = MAX RATED
TC = 25oC
0.1
0.1
10ms
100ms
TJ = 25oC
60
0
2
0.01
0.1
1
10
100
1000 10000
400
180
TJ = 175oC
STARTING TJ = 150oC
Figure 6. Unclamped Inductive Switching
Capability
VDD = 5V
120
10
NOTE: Refer to Fairchild Application Notes AN7514 and AN7515
PULSE DURATION = 80μs
DUTY CYCLE = 0.5% MAX
240
STARTING TJ = 25oC
tAV, TIME IN AVALANCHE (ms)
IS, REVERSE DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
300
100
1
0.001
1
10
100 200
VDS, DRAIN TO SOURCE VOLTAGE (V)
Figure 5. Forward Bias Safe Operating Area
TJ = -55oC
3
4
5
6
VGS, GATE TO SOURCE VOLTAGE (V)
VGS = 0 V
100
TJ = 175 oC
10
TJ = 25 oC
1
0.1
0.0
7
0.2
0.4
0.6
0.8
1.0
1.2
VSD, BODY DIODE FORWARD VOLTAGE (V)
Figure 7. Transfer Characteristics
Figure 8. Forward Diode Characteristics
300
300
VGS
15V Top
10V
8V
7V
6V
5.5V
5V Bottom
250
200
150
100
80μs PULSE WIDTH
Tj=25oC
50
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
If R = 0
tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD)
If R ≠ 0
tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1]
1000
IAS, AVALANCHE CURRENT (A)
ID, DRAIN CURRENT (A)
2000
1000
5V
0
0
1
2
3
4
VDS, DRAIN TO SOURCE VOLTAGE (V)
5V
200
150
100
50
0
5
Figure 9. Saturation Characteristics
FDBL0090N40 Rev.C2
250
VGS
5.5V
15V Top
10V
8V
7V
6V
5.5V
5V Bottom
80μs PULSE WIDTH
Tj=175oC
0
1
2
3
4
VDS, DRAIN TO SOURCE VOLTAGE (V)
5
Figure 10. Saturation Characteristics
4
www.fairchildsemi.com
FDBL0090N40 N-Channel PowerTrench® MOSFET
Typical Characteristics
ID = 80A
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
rDS(on), DRAIN TO SOURCE
ON-RESISTANCE (mΩ)
10
PULSE DURATION = 80μs
DUTY CYCLE = 0.5% MAX
8
6
TJ = 175oC
TJ = 25oC
4
2
0
2
4
6
8
VGS, GATE TO SOURCE VOLTAGE (V)
10
Figure 11. RDSON vs. Gate Voltage
1.6
1.4
1.2
1.0
0.8
ID = 80A
VGS = 10V
0.6
0.4
-80
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE(oC)
200
Figure 12. Normalized RDSON vs. Junction
Temperature
1.10
VGS = VDS
ID = 250μA
1.2
ID = 1mA
1.05
0.9
1.00
0.6
0.95
0.3
0.0
-80
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE(oC)
0.90
-80
200
Figure 13. Normalized Gate Threshold Voltage vs.
Temperature
VGS, GATE TO SOURCE VOLTAGE(V)
Ciss
10000
Coss
1000
Crss
100
f = 1MHz
VGS = 0V
10
0.1
1
10
VDS, DRAIN TO SOURCE VOLTAGE (V)
100
Figure 15. Capacitance vs. Drain to Source
Voltage
FDBL0090N40 Rev.C2
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE (oC)
200
Figure 14. Normalized Drain to Source
Breakdown Voltage vs. Junction Temperature
100000
CAPACITANCE (pF)
PULSE DURATION = 80μs
DUTY CYCLE = 0.5% MAX
1.8
NORMALIZED DRAIN TO SOURCE
BREAKDOWN VOLTAGE
NORMALIZED GATE
THRESHOLD VOLTAGE
1.5
2.0
10
ID = 80A
VDD = 20V
8
VDD =16V
6
VDD = 24V
4
2
0
0
30
60
90
120
Qg, GATE CHARGE(nC)
150
Figure 16. Gate Charge vs. Gate to Source
Voltage
5
www.fairchildsemi.com
FDBL0090N40 N-Channel PowerTrench® MOSFET
Typical Characteristics
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower™
F-PFS™
®*
®
Awinda®
FRFET®
®
PowerTrench®
AX-CAP *
Global Power ResourceSM
®
TinyBoost
BitSiC™
GreenBridge™
PowerXS™
TinyBuck®
Build it Now™
Green FPS™
Programmable Active Droop™
TinyCalc™
®
CorePLUS™
Green FPS™ e-Series™
QFET
TinyLogic®
CorePOWER™
Gmax™
QS™
TINYOPTO™
CROSSVOLT™
GTO™
Quiet Series™
TinyPower™
CTL™
IntelliMAX™
RapidConfigure™
TinyPWM™
Current Transfer Logic™
ISOPLANAR™
™
TinyWire™
DEUXPEED®
Marking Small Speakers Sound Louder
TranSiC™
Dual Cool™
Saving our world, 1mW/W/kW at a time™
and Better™
TriFault Detect™
EcoSPARK®
SignalWise™
MegaBuck™
TRUECURRENT®*
SmartMax™
EfficentMax™
MICROCOUPLER™
μSerDes™
SMART START™
ESBC™
MicroFET™
Solutions for Your Success™
MicroPak™
®
SPM®
MicroPak2™
®
STEALTH™
UHC®
MillerDrive™
Fairchild
®
®
Ultra FRFET™
SuperFET
MotionMax™
Fairchild Semiconductor
SuperSOT™-3
UniFET™
MotionGrid®
FACT Quiet Series™
®
MTi
SuperSOT™-6
VCX™
FACT®
®
MTx
SuperSOT™-8
VisualMax™
FAST®
®
®
MVN
SupreMOS
VoltagePlus™
FastvCore™
®
mWSaver
SyncFET™
XS™
FETBench™
OptoHiT™
Sync-Lock™
Xsens™
FPS™
仙童 ™
tm
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR
WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF
ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF
OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE
WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used here in:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2.
A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system, or to affect its safety or
effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website,
www.Fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild
Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of
up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and
warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is
committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative / In Design
Datasheet contains the design specifications for product development. Specifications
may change in any manner without notice.
Preliminary
First Production
Datasheet contains preliminary data; supplementary data will be published at a later
date. Fairchild Semiconductor reserves the right to make changes at any time without
notice to improve design.
No Identification Needed
Full Production
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve the design.
Obsolete
Not In Production
Datasheet contains specifications on a product that is discontinued by Fairchild
Semiconductor. The datasheet is for reference information only.
Rev. I71
FDBL0090N40 Rev.C2
6
www.fairchildsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com