HCPL0501R2

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. HCPL0452, HCPL0453, HCPL0500, HCPL0501, HCPL0530, HCPL0531, HCPL0534 High Speed Transistor Optocouplers Single Channel: HCPL0452 HCPL0453 HCPL0500 HCPL0501 Dual Channel: HCPL0530 HCPL0531 HCPL0534 Features Description ■ High speed – 1 MBit/s The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact 8-pin small outline package. ■ 15kV/μs minimum commone mode transient immunity ■ ■ ■ ■ ■ at VCM = 1500V (HCPL0453/0534) Open collector output Guaranteed performance over temperature: 0°C to 70°C U.L. recognized (File # E90700) VDE0884 recognized (file#136616) – approval pending for HCPL0530/0531/0453 – ordering option V, e.g., HCPL0500V BSI recognized (file# 8661, 8662) – HCPL0452/0500/0501 only A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL04XX devices do not have the base bonded out to a lead for additional noise margin. The HCPL053X devices have two channels per package for optimum mounting density. Truth Table Applications (positive Logic) ■ Line receivers ■ Pulse transformer replacement ■ Output interface to CMOS-LSTTL-TTL ■ Wide bandwidth analog coupling LED VO ON LOW OFF HIGH Schematics N/C 1 8 VCC + 1 V + 2 7 VB* 8 VCC F1 _ 2 7 V01 3 6 V02 VF _ 3 6 VO _ VF2 N/C 4 5 GND HCPL0500, HCPL0501 *BASE NOT CONNECTED + 4 5 GND HCPL0530/HCPL0531/HCPL0534 FOR HCPL0452, HCPL0453 ©2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 2.2 www.fairchildsemi.com HCPL0XXX — High Speed Transistor Optocouplers -XQH 20 Symbol Parameter Value Units TSTG Storage Temperature -40 to +125 °C TOPR Operating Temperature -40 to +85 °C Reflow Temperature Profile (Refer to page 11) EMITTER IF (avg) DC/Average Forward Input Current 25 mA IF (pk) Peak Forward Input Current (50% duty cycle, 1ms P.W.) 50 mA Peak Transient Input Current - ([≤1μs P.W., 300 pps) 1.0 A IF (trans) VR Reverse Input Voltage 5 V PD Input Power Dissipation 45 mW Average Output Current (Pin 6) 8 mA IO (pk) Peak Output Current 16 mA VEBR Emitter-Base Reverse Voltage (HCPL0500/HCPL0501 only) 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage -0.5 to 20 V IB Base Current (HCPL0500/HCPL0501 only) PD Output power dissipation DETECTOR IO (avg) ©2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 2.2 5 mA 100 mW www.fairchildsemi.com 2 HCPL0XXX — High Speed Transistor Optocouplers Absolute Maximum Ratings (TA = 25°C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.7 V EMITTER VF Input Forward Voltage IF = 16mA, TA = 25°C All 1.45 IF = 16mA 1.8 Input Reverse Breakdown Voltage IR = 10μA All ΔVF / ΔTA Temperature Coefficient of Forward Voltage IF = 16mA All -1.6 IF = 0mA, VO = VCC = 5.5V, TA = 25°C All 0.001 0.5 IF = 0mA, VO = VCC = 15V, TA = 25°C All 0.005 1 IF = 0 mA, VO = VCC = 15V All BVR 5.0 V mV/°C DETECTOR IOH ICCL Logic High Output Current Logic Low Supply Current IF = 16mA, VO = Open, VCC = 15V 50 HCPL0452/3/ 0500/1 120 HCPL0530/1/4 ICCH Logic High Supply Current μA 200 μA 400 IF = 0mA, VO = Open, VCC = 15V, TA = 25°C All 0.01 1 IF = 0mA, VO = Open, VCC = 15V HCPL0452/3/ 0500/1 2 HCPL0530/1/4 4 μA Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. HCPL0500/0530 7 27 50 HCPL0452/3 19 27 50 Unit COUPLED CTR Current Tranfer Ratio (Note 1) IF = 16mA, VO = 0.4V, VCC = 4.5V, TA = 25°C % HCPL0501/0531 IF = 16mA, VO = 0.5V, VCC = 4.5V HCPL0500 5 30 HCPL0452/3 15 30 HCPL0501/0534 VOL Logic Low Output Voltage IF = 16mA, IO = 1.1mA, VCC = 4.5V, TA = 25°C HCPL0500 IF = 16mA, IO = 3mA, VCC = 4.5V, TA = 25°C HCPL0452/3 HCPL0501/0531/4 IF = 16mA, IO = 0.8mA, VCC = 4.5V IF = 16mA, IO = 2.4mA, VCC = 4.5V 0.18 HCPL0530 0.4 V 0.5 0.25 0.4 HCPL0500 HCPL0530 0.13 0.5 HCPL0452/3 0.23 0.5 HCPL0501/0531/4 *All typicals at TA = 25°C ©2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 2.2 www.fairchildsemi.com 3 HCPL0XXX — High Speed Transistor Optocouplers Electrical Characteristics (TA = 0 to 70°C unless otherwise specified) Switching Characteristics TVCC = 5V) Symbol TPHL TPLH |CMH| |CML| Parameter Propagation Delay Time to Logic LOW Propagation Delay Time to Logic HIGH Common Mode Transient Immunity at Logic HIGH Common Mode Transient Immunity at Logic LOW Test Conditions Device Min. Typ.* Max. Unit TA = 25°C, RL = 4.1kΩ, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 0.45 1.5 RL = 1.9kΩ, IF = 16mA, TA = 25°C (Note 3) (Fig. 9) HCPL0452/3 0.45 0.8 μs HCPL0501/0531/4 RL = 4.1kΩ, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 2.0 RL = 1.9kΩ, IF = 16mA (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 TA = 25°C, RL = 4.1kΩ, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 0.5 1.5 RL = 1.9kΩ, IF = 16mA, TA = 25°C (Note 3) (Fig. 9) HCPL0452/3 0.3 0.8 μs HCPL0501/0531/4 RL = 4.1kΩ, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 2.0 RL = 1.9kΩ, IF = 16mA (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 IF = 0mA, VCM = 10VP-P, RL = 4.1kV, TA = 25°C (Note 4) (Fig. 10) HCPL0500 1,000 10,000 IF = 0mA, VCM = 10VP-P, RL = 1.9kΩ TA = 25°C, (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0534 15,000 40,000 IF = 16mA, VCM = 1500VP-P, RL = 1.9Ω, TA = 25°C (Note 4) (Fig. 10) HCPL0453 15,000 40,000 IF = 16mA, VCM = 10VP-P, RL = 4.1kΩ, TA = 25°C (Note 4) (Fig. 10) HCPL0500 1,000 10,000 IF = 16 mA, VCM = 10 VP-P, RL = 1.9kΩ (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0534 15,000 40,000 HCPL0453 15,000 40,000 V/μs HCPL0530 HCPL0501/31 V/μs HCPL0530 HCPL0501/31 IF = 16mA, TA = 25°C, VCM = 1500 VP-P, CL = 15pF) (Note 4) (Fig. 10) Isolation Characteristics Symbol Characteristics Test Conditions Min. VISO Input-Output Isolation Voltage f = 60 Hz, t = 1.0 min., II-O ≤ 2μA (Note 5, 6) 2500 RISO Isolation Resistance VI-O = 500V (Note 5) 1011 CISO Isolation Capacitance VI-O = 0 , f = 1.0MHz (Note 5) Typ.* Max . Unit VacRMS 0.2 pF *All typicals at TA = 25°C ©2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 2.2 www.fairchildsemi.com 4 HCPL0XXX — High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified) 1 Current Transfer Ratio is designed as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 2. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36 mA and 6.1kΩ pull-up resistor. 3. The 1.9 kΩ load represents 1 TTL unit load of 1.6 mA and 5.6 kΩ pull-up resistor. 4. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO