KSP10BU

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. KSP10 KSP10 VHF/UHF transistor TO-92 1 1. Base 2. Emitter 3. Collector NPN Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO Collector-Base Voltage VCEO VEBO PC PC Parameter Value 30 Units V Collector-Emitter Voltage 25 V Emitter-Base Voltage 3.0 V Collector Power Dissipation (Ta=25°C) 350 mW Derate above 25°C 2.8 mW/°C Collector Power Dissipation (TC=25°C) 1.0 W Derate above 25°C 8.0 W/°C °C TJ Junction Temperature 150 TSTG Storage Temperature -55~150 °C Rth(j-c) Thermal Resistance, Junction to Case 125 °C/W Rth(j-a) Thermal Resistance, Junction to Ambient 357 °C/W Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO Parameter Collector-Base Breakdown Voltage Test Condition IC=100µA, IE=0 Min. 30 BVCEO Collector-Emitter Breakdown Voltage IC=1mA, IB=0 25 BVEBO Emitter-Base Breakdown Voltage IE=10µA, IC=0 3.0 ICBO Collector Cut-off Current VCB=25V, IE=0 IEBO Emitter Cut-off Current VEB=2V, IC=0 hFE DC Current Gain VCE=10V, IC=4mA Max. Units V V V 100 nA 100 nA 60 VCE (sat) Collector-Emitter Saturation Voltage IC=4mA, IB=0.4mA 0.5 V VBE (on) Base-Emitter On Voltage VCE=10V, IC=4mA 0.95 V fT Current Gain Bandwidth Product VCE=10V, IC=4mA, f=100MHz Cob Output Capacitance VCB=10V, IE=0, f=1MHz Crb Collector Base Feedback Capacitance VCB=10V, IE=0, f=1MHz Cc·rbb´ Collector Base Time Constant VCB=10V, IC=4mA, f=31.8MHz 650 0.35 MHz 0.7 pF 0.65 pF 9.0 ps * Pulse Test: PW≤300µs, Duty Cycle≤2% ©2002 Fairchild Semiconductor Corporation Rev. A2, September 2002 KSP10 VBE(sat), VCE(sat)[V], SATURATION VOLTAGE Typical Characteristics 1000 hFE, DC CURRENT GAIN VCE = 10V 100 10 1 1 10 100 1000 10000 IC = 10 IB 100 10 0.1 V CE(sat) 1 10 100 1000 IC[mA], COLLECTOR CURRENT IC[mA], COLLECTOR CURRENT Figure 1. DC current Gain fT[MHz], CURRENT GAIN-BANDWIDTH PRODUCT VBE(sat) 1000 Figure 2. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage 10000 140 VCE = 10V f=100MHz ], INPUT ADMITTANCE 120 1000 100 100 80 gib 60 -bib yib[ Ω 40 20 10 1 10 100 100 IC[mA], COLLECTOR CURRENT Figure 3. Current Gain Bandwidth Product -20 1000MHz -30 700 -40 200 Figure 4. Rectangular Form ], FORWARD TRANSFER ADMITTANCE -10 yob[ Ω ], OUTPUT ADMITTANCE 0 400 100 -50 yfb[ Ω -60 10 20 30 40 gib[ 50 Ω 0 60 ] Figure 5. Polar Form ©2002 Fairchild Semiconductor Corporation 70 1000 f[MHz], FREQUENCY 80 90 100 90 80 70 bfb 60 50 40 30 -gfb 20 10 0 -10 -20 -30 100 1000 f[MHz], FREQUENCY Figure 6. Rectangular Form Rev. A2, September 2002 KSP10 Typical Characteristics (Continued) 90 70 400 200 60 ], 600 jbfb[ 700 100 5 4 Ω Ω 50 yfb[ ], REVERSE TRANSFER ADMITTANCE 6 80 40 30 1000MHz 20 3 -brb 2 1 10 60 50 40 30 20 gfb[ Ω 70 10 0 -10 -20 -30 0 100 ] Figure 7. Polar Form Figure 8. Rectangular Form 10 2 9 ], OUTPUT ADMITTANCE 3 1 ], 0 Ω jbrb[ 1000 f[MHz], FREQUENCY -1 100 200 -2 400 7 6 5 4 bob 3 Ω -3 8 yob[ 700 -4 2 gob 1 -1.6 -1.2 -0.8 -0.4 0.0 gfb[ Ω -5 -2.0 1000MHz 0.4 0.8 1.2 1.6 ] 2.0 0 100 1000 f[MHz], FREQUENCY Figure 9. Polar Form Figure 10. Rectangular Form 16 14 12 10 ], 1000MHz jbob[ Ω 8 700 6 4 400 200 2 100 0 2 4 gob[ Ω 0 6 8 ] Figure 11. Polar Form ©2002 Fairchild Semiconductor Corporation Rev. A2, September 2002 KSP10 Package Dimensions TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] ±0.20 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 +0.10 0.38 –0.05 (R2.29) Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. A2, September 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2002 Fairchild Semiconductor Corporation Rev. I1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com