Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
www.fairchildsemi.com
LM79XX
3-Terminal 1A Negative Voltage Regulator
Features
Description
• Output Current in Excess of 1A
• Output Voltages of -5, -6, -8 , -9, -10, -12, -15, -18 and 24V
• Internal Thermal Overload Protection
• Short Circuit Protection
• Output Transistor Safe Operating Area Compensation
The LM79XX series of three terminal negative regulators
are available in TO-220 package and with several fixed
output voltages, making them useful in a wide range
of applications. Each type employs internal current limiting,
thermal shut down and safe operating area protection,
making it essentially indestructible.
TO-220 (Single Gauge)
Vin
1
1. GND 2. Input 3. Output
Internal Block Digram
GND
R1
VOLTAGE
REFERENCE
R2
Output
Out
+
Q1
Q2
I1
I2
PROTECTION
CIRCUITRY
Rsc
In
Input
Rev. 1.0.3
©2011 Fairchild Semiconductor Corporation
LM79XX
Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
VI
-35
V
Thermal Resistance Junction-Case (Note1)
RθJC
5
Thermal Resistance Junction-Air (Note1, 2)
RθJA
65
Operating Temperature Range
TOPR
0 ~ +125
°C
Storage Temperature Range
TSTG
-65 ~ +150
°C
Input Voltage
°C/W
Note:
1. Thermal resistance test board
Size: 76.2mm * 114.3mm * 1.6mm(1S0P)
JEDEC standard: JESD51-3, JESD51-7
2. Assume no ambient airflow
Electrical Characteristics (LM7905)
(VI = -10V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note3)
Load Regulation (Note3)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VD
Symbol
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
Conditions
Min.
Typ.
Max.
TJ = +25°C
-4.8
-5.0
-5.2
IO = 5mA to 1A, PO ≤ 15W
VI = -7V to -20V
-4.75
-5.0
-5.25
VI = -7V to -25V
-
35
100
VI = -8V to -12V
-
8
50
TJ = +25°C
IO = 5mA to 1.5A
-
10
100
TJ =+25°C
IO = 250mA to 750mA
-
3
50
TJ =+25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -8V to -25V
-
0.1
0.8
IO = 5mA
-
- 0.4
-
mV/°C
-
40
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA =+25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ =+25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ =+25°C
-
2.2
-
A
Note
3. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
2
LM79XX
Electrical Characteristics (LM7906) (Continued)
(VI = -11V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VD
Symbol
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
Conditions
Min.
Typ.
Max.
TJ = +25°C
-5.75
-6
-6.25
IO = 5mA to 1A, PO ≤ 15W
VI = -9V to -21V
-5.7
-6
-6.3
VI = -8V to -25V
-
10
120
VI = -9V to -13V
-
5
60
TJ = +25°C
IO = 5mA to 1.5A
-
10
120
TJ =+25°C
IO = 250mA to 750mA
-
3
60
TJ =+25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -8V to -25V
-
0.1
1.3
IO = 5mA
-
-0.5
-
mV/°C
-
130
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA =+25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
3
LM79XX
Electrical Characteristics (LM7908) (Continued)
(VI = -14V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VD
Symbol
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
Conditions
Min.
Typ.
Max.
TJ = +25°C
-7.7
-8
-8.3
IO = 5mA to 1A, PO ≤ 15W
VI = -10V to -23V
-7.6
-8
-8.4
VI = -10.5V to -25V
-
10
160
VI = -11V to -17V
-
5
80
TJ = +25°C
IO = 5mA to 1.5A
-
12
160
TJ =+25°C
IO = 250mA to 750mA
-
4
80
TJ =+25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -10.5V to -25V
-
0.1
1
IO = 5mA
-
-0.6
-
mV/°C
-
175
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA =+25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
4
LM79XX
Electrical Characteristics (LM7909) (Continued)
(VI = -15V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VD
Symbol
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
Conditions
Min.
Typ.
Max.
TJ = +25°C
-8.7
-9.0
-9.3
IO = 5mA to 1A, PO ≤ 15W
VI = -1.5V to -23V
-8.6
-9.0
-9.4
VI = -11.5V to -26V
-
10
180
VI = -12V to -18V
-
5
90
TJ = +25°C
IO = 5mA to 1.5A
-
12
180
TJ = +25°C
IO = 250mA to 750mA
-
4
90
TJ = +25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -11.5V to -26V
-
0.1
1
IO = 5mA
-
-0.6
-
mV/°C
-
175
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA = +25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note:
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
5
LM79XX
Electrical Characteristics (LM7910) (Continued)
(VI = -17V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VO
Symbol
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
Conditions
Min.
Typ.
Max.
TJ = +25°C
-9.6
-10
-10.4
IO = 5mA to 1A, Pd ≤ 15W
VI = -12V to -28
-9.5
-10
-10.5
VI = -12.5V to -28V
-
12
200
VI = -14V to -20V
-
6
100
TJ = +25°C
IO = 5mA to 1.5A
-
12
200
TJ = +25°C
IO = 250mA to 750mA
-
4
100
TJ = +25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -12.5V to -28V
-
0.1
1
IO = 5mA
-
-1
-
mV/°C
-
280
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
10Hz ≤ f ≤ 100kHz
TA =+25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note:
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
6
LM79XX
Electrical Characteristics (LM7912) (Continued)
(VI = -19V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VD
Symbol
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
Conditions
Min.
Typ.
Max.
TJ = +25°C
-11.5
-12
-12.5
IO = 5mA to 1A, PO ≤ 15W
VI = -15.5V to -27V
-11.4
-12
-12.6
VI = -14.5V to -30V
-
12
240
VI = -16V to -22V
-
6
120
TJ = +25°C
IO = 5mA to 1.5A
-
12
240
TJ = +25°C
IO = 250mA to 750mA
-
4
120
TJ = +25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -14.5V to -30V
-
0.1
1
IO = 5mA
-
-0.8
-
mV/°C
-
200
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA = +25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note:
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
7
LM79XX
Electrical Characteristics (LM7915) (Continued)
(VI = -23V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VD
Symbol
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
Conditions
Min.
Typ.
Max.
TJ = +25°C
-14.4
-15
-15.6
IO = 5mA to 1A, PO ≤ 15W
VI = -18V to -30V
-14.25
-15
-15.75
VI = -17.5V to -30V
-
12
300
VI = -20V to -26V
-
6
150
TJ = +25°C
IO = 5mA to 1.5A
-
12
300
TJ = +25°C
IO = 250mA to 750mA
-
4
150
TJ = +25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -17.5V to -30V
-
0.1
1
IO = 5mA
-
-0.9
-
mV/°C
-
250
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA =+25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note:
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
8
LM79XX
Electrical Characteristics (LM7918) (Continued)
(VI = -27V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Symbol
VO
ΔVO
ΔVO
Quiescent Current
IQ
Quiescent Current Change
ΔIQ
Temperature Coefficient of VD
ΔVo/ΔT
Conditions
Min.
Typ. Max.
TJ = +25°C
-17.3
-18
-18.7
IO = 5mA to 1A, PO ≤ 15W
VI = -22.5V to -33V
-17.1
-18
-18.9
VI = -21V to -33V
-
15
360
VI = -24V to -30V
-
8
180
TJ = +25°C
IO = 5mA to 1.5A
-
15
360
TJ = +25°C
IO = 250mA to 750mA
-
5
180
TJ = +25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -21V to -33V
-
0.1
1
IO = 5mA
-
-1
-
mV/°C
-
300
-
μV
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA = +25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note:
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
9
LM79XX
Electrical Characteristics (LM7924) (Continued)
(VI = -33V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.)
Parameter
Symbol
Conditions
Min.
Typ.
Max.
-23
-24
-25
-22.8
-24
-25.2
VI = -27V to -38V
-
15
480
VI = -30V to -36V
-
8
180
TJ = +25°C
IO = 5mA to 1.5A
-
15
480
TJ = +25°C
IO = 250mA to 750mA
-
5
240
TJ = +25°C
-
3
6
IO = 5mA to 1A
-
0.05
0.5
VI = -27V to -38V
-
0.1
1
IO = 5mA
-
-1
-
mV/°C
-
400
-
μV
TJ = +25°C
Output Voltage
Line Regulation (Note1)
Load Regulation (Note1)
Quiescent Current
Quiescent Current Change
Temperature Coefficient of VD
VO
ΔVO
ΔVO
IQ
ΔIQ
ΔVo/ΔT
IO = 5mA to 1A, PO ≤ 15W
VI = -27V to -38V
TJ = +25°C
Unit
V
mV
mV
mA
mA
Output Noise Voltage
VN
f = 10Hz to 100kHz
TA = +25°C
Ripple Rejection
RR
f = 120Hz
ΔVI = 10V
54
60
-
dB
Dropout Voltage
VD
TJ = +25°C
IO = 1A
-
2
-
V
Short Circuit Current
ISC
TJ = +25°C, VI = -35V
-
300
-
mA
Peak Current
IPK
TJ = +25°C
-
2.2
-
A
Note:
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken
into account separately. Pulse testing with low duty is used.
10
LM79XX
Typical Performance Characteristics
15
Vin=10V
Io=40mA
Ou 5.05
tp
5
ut
Vo
lta 4.95
ge
[- 4.9
V]
Load Regulation[mV]
Output Voltage[-V]
5.1
Vin=25V
Io=100mA
4.85
Lo 13
ad 11
Re 9
gul 7
ati 5
on 3
[m
1
V]
Io=1.5A
Io=0.75A
-1
-3
4.8
-5
-40
-25
0
25
50
75
100
125
-40
-25
TA, Ambient Temperature [ oC]
Figure 1. Output Voltage
25
50
75
100
125
Figure 2. Load Regulation
4
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
Dropout Voltage [V]
V l
[V]
3.5
D
Quiescent Current [mA]
0
TA, Ambient Temperature [ oC]
3
2.5
2
1.5
Io=1A
1
0.5
0
-40
-25
0
25
50
75
100
TA, Ambient Temperature [oC]
125
Figure 3. Quiescent Current
-40
-25
0
25
50
75
100
125
TA, Ambient Temperature [oC]
Figure 4. Dropout Voltage
Short Circuit Current[A]
0.6
0.55
Sh 0.5
ort 0.45
Cir 0.4
cui 0.35
0.3
t
0.25
Cu 0.2
rre 0.15
nt 0.1
[A] 0.05
0
-0.05
-0.1
-40
-25
0
25
50
75
100
TA, Ambient Temperature [ oC]
125
Figure 5. Short Circuit Current
11
LM79XX
Typical Applications
+ 2.2μF
+ 1μ F
CO
1
CI
2
- VI
KA79XX
3
LM79XX
Input
- VO
Output
Figure 6. Negative Fixed output regulator
1
+ 15V
MC7812
KA7812
+
C1
0.33μF
2
1
- 15V
2
+
Co
1 μF
+12V
1N4001
*
GND
+ 2.2μF
C1
3
KA7912
LM7912
1 μF +
Co
3
1N4001
*
-12V
Figure 7. Split power supply ( ± 12V/1A)
Notes:
(1) To specify an output voltage, substitute voltage value for "XX "
(2) Required for stability. For value given, capacitor must be solid tantalum. If aluminium electronics are used, at least ten times
value shown should be selected. CI is required if regulator is located an appreciable distance from power supply filter.
(3) To improve transient response. If large capacitors are used, a high current diode from input to output (1N400l or similar)
should be introduced to protect the device from momentary input short circuit.
12
LM79XX
Mechanical Dimensions
Package
Dimensions in millimeters
TO-220 [ SINGLE GAUGE ]
13
LM79XX
Ordering Information
Product Number
Output Voltage Tolerance
Package
Operating Temperature
±4%
TO-220
(Single Gauge)
0 ~ +125°C
LM7905CT
LM7906CT
LM7908CT
LM7909CT
LM7910CT
LM7912CT
LM7915CT
LM7918CT
LM7924CT
14
LM79XX
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
9/7/11 0.0m 001
Stock#DS400021
© 2011 Fairchild Semiconductor Corporation
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com