MC100E416FN

MC10E416, MC100E416 5VECL Quint Differential Line Receiver Description The MC10E416/100E416 is a 5-bit differential line receiving device. The 2.0 GHz of bandwidth provided by the high frequency outputs makes the device ideal for buffering of very high speed oscillators. The design incorporates two stages of gain, internal to the device, making it an excellent choice for use in high bandwidth amplifier applications. The differential inputs have internal clamp structures which will force the Q output of a gate in an open input condition to go to a LOW state. Thus, inputs of unused gates can be left open and will not affect the operation of the rest of the device. Note that the input clamp will take affect only if both inputs fall 2.5 V below VCC. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The 100 Series contains temperature compensation. Features x x x x x x Differential D and Q; VBB available 600 ps Max. Propagation Delay High Frequency Outputs 2 Stages of Gain http://onsemi.com PLCCï28 FN SUFFIX CASE 776 MARKING DIAGRAM* 1 28 MCxxxE416FNG AWLYYWW xxx A WL YY WW G = 10 or 100 = Assembly Location = Wafer Lot = Year = Work Week = PbïFree Package *For additional marking information, refer to Application Note AND8002/D. PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = ï4.2 V to ï5.7 V Internal Input 50 kW Pulldown Resistors ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet. x x ESD Protection: Human Body Model; > 2 kV, Machine Model; > 200 V Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test x x Moisture Sensitivity Level: x Pb = 1; PbïFree = 3 For Additional Information, see Application Note AND8003/D Flammability Rating: UL 94 Vï0 @ 0.125 in, Oxygen Index: 28 to 34 Transistor Count = 201 devices x x PbïFree Packages are Available* *For additional information on our PbïFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ¤ Semiconductor Components Industries, LLC, 2006 November, 2006 ï Rev. 7 1 Publication Order Number: MC10E416/D MC10E416, MC100E416 D3 D4 D4 VCCO Q4 Q4 VCCO 25 24 23 22 21 20 19 18 Q3 27 17 Q3 28 16 VCC 15 Q2 D3 26 D2 D2 Pinout: 28-Lead PLCC (Top View) VEE 1 VBB 2 14 Q2 D0 3 13 VCCO D0 4 12 Q1 5 6 7 8 9 10 11 D1 D1 VCCO Q0 Q0 VCCO Q1 * All VCC and VCCO pins are tied together on the die. Warning: All VCC, VCCO, and VEE pins must be externally connected to Power Supply to guarantee proper operation. D0 Q0 D0 Q0 D1 Q1 D1 Q1 D2 Q2 D2 Q2 D3 Q3 D3 Q3 D4 Q4 D4 Q4 VBB Figure 2. Logic Diagram Figure 1. 28ïLean Pinout Assignment Table 1. PIN DESCRIPTION PIN FUNCTION D[0:4], D[0:4] ECL Differential Data Inputs Q[0:4], Q[0:4] ECL Differential Data Outputs VBB Reference Voltage Output VCC, VCCO Positive Supply VEE Negative Supply http://onsemi.com 2 MC10E416, MC100E416 Table 2. MAXIMUM RATINGS Symbol Parameter Condition 1 VCC PECL Mode Power Supply VEE = 0 V VI PECL Mode Input Voltage NECL Mode Input Voltage VEE = 0 V VCC = 0 V Iout Output Current Continuous Surge IBB VBB Sink/Source TA Operating Temperature Range Tstg Storage Temperature Range qJA Thermal Resistance (JunctionïtoïAmbient) 0 lfpm 500 lfpm qJC Thermal Resistance (JunctionïtoïCase) Standard Board Tsol Wave Solder Pb PbïFree Condition 2 VI v VCC VI w VEE Rating Unit 8 V 6 ï6 V V 50 100 mA mA r 0.5 mA 0 to +85 qC ï65 to +150 qC PLCCï28 PLCCï28 63.5 43.5 qC/W qC/W PLCCï28 22 to 26 qC/W 265 265 qC Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. http://onsemi.com 3 MC10E416, MC100E416 Table 3. 10E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V, VEE = 0.0 V (Note 1) 0qC Symbol Min Characteristic 25qC Typ Max 135 162 Min 85qC Typ Max 135 162 Min Typ Max Unit 135 162 mA IEE Power Supply Current VOH Output HIGH Voltage (Note 2) 3980 4070 4160 4020 4105 4190 4090 4185 4280 mV VOL Output LOW Voltage (Note 2) 3050 3210 3370 3050 3210 3370 3050 3227 3405 mV VIH Input HIGH Voltage (SingleïEnded) 3830 3995 4160 3870 4030 4190 3940 4110 4280 mV VIL Input LOW Voltage (SingleïEnded) 3050 3285 3520 3050 3285 3520 3050 3302 3555 mV VBB Output Voltage Reference 3.62 3.73 3.65 3.75 3.69 3.81 V VIHCMR Input HIGH Voltage Common Mode Range (Differential Configuration) (Note 3) 2.7 5.0 2.7 5.0 2.7 5.0 V IIH Input HIGH Current 150 mA IIL Input LOW Current 150 0.5 150 0.3 0.5 0.25 0.3 0.2 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.06 V. 2. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V. 3. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. Table 4. 10E SERIES NECL DC CHARACTERISTICS VCCx = 0.0 V; VEE = ï5.0 V (Note 4) 0qC Symbol Characteristic Min Typ 25qC Max Min Typ 85qC Max Min Typ Max Unit IEE Power Supply Current 135 162 135 162 135 162 mA VOH Output HIGH Voltage (Note 5) ï1020 ï930 ï840 ï980 ï895 ï810 ï910 ï815 ï720 mV VOL Output LOW Voltage (Note 5) ï1950 ï1790 ï1630 ï1950 ï1790 ï1630 ï1950 ï1773 ï1595 mV VIH Input HIGH Voltage (SingleïEnded) ï1170 ï1005 ï840 ï1130 ï970 ï810 ï1060 ï890 ï720 mV VIL Input LOW Voltage (SingleïEnded) ï1950 ï1715 ï1480 ï1950 ï1715 ï1480 ï1950 ï1698 ï1445 mV VBB Output Voltage Reference ï1.38 ï1.27 ï1.35 ï1.25 ï1.31 ï1.19 V VIHCMR Input HIGH Voltage Common Mode Range (Differential Configuration) (Note 6) ï2.3 0.0 ï2.3 0.0 ï2.3 0.0 V IIH Input HIGH Current 150 mA IIL Input LOW Current 150 0.5 0.3 150 0.5 0.065 0.3 0.2 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 4. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.06 V. 5. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V. 6. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. http://onsemi.com 4 MC10E416, MC100E416 Table 5. 100E SERIES PECL DC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V (Note 7) 0qC Symbol Min Characteristic 25qC Typ Max 135 162 Min 85qC Typ Max 135 162 Min Typ Max Unit 155 186 mA IEE Power Supply Current VOH Output HIGH Voltage (Note 8) 3975 4050 4120 3975 4050 4120 3975 4050 4120 mV VOL Output LOW Voltage (Note 8) 3190 3295 3380 3190 3255 3380 3190 3260 3380 mV VIH Input HIGH Voltage (SingleïEnded) 3835 3975 4120 3835 3975 4120 3835 3975 4120 mV VIL Input LOW Voltage (SingleïEnded) 3190 3355 3525 3190 3355 3525 3190 3355 3525 mV VBB Output Voltage Reference 3.62 3.74 3.62 3.74 3.62 3.74 V VIHCMR Input HIGH Voltage Common Mode Range (Differential Configuration) (Note 9) 2.7 5.0 2.7 5.0 2.7 5.0 V IIH Input HIGH Current 150 mA IIL Input LOW Current 150 0.5 0.3 150 0.5 0.25 0.5 0.2 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 7. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.8 V. 8. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V. 9. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. Table 6. 100E SERIES NECL DC CHARACTERISTICS VCCx = 0 V; VEE = ï5.0 V (Note 10) 0qC Symbol Characteristic Min 25qC Typ Max 135 162 Min 85qC Typ Max 135 162 Min Typ Max Unit 155 186 mA ï950 ï880 mV ï1740 ï1620 mV ï1025 ï880 mV ï1645 ï1475 mV ï1.38 ï1.26 V ï2.3 0.0 V 150 mA IEE Power Supply Current VOH Output HIGH Voltage (Note 11) ï1025 ï950 ï880 ï1025 ï950 ï880 ï1025 VOL Output LOW Voltage (Note 11) ï1810 ï1705 ï1620 ï1810 ï1745 ï1620 ï1810 VIH Input HIGH Voltage (SingleïEnded) ï1165 ï1025 ï880 ï1165 ï1025 ï880 ï1165 VIL Input LOW Voltage (SingleïEnded) ï1810 ï1645 ï1475 ï1810 ï1645 ï1475 ï1810 VBB Output Voltage Reference ï1.38 ï1.26 ï1.38 ï1.26 VIHCMR Input HIGH Voltage Common Mode Range (Differential Configuration) (Note 12) ï2.3 0.0 ï2.3 0.0 IIH Input HIGH Current IIL Input LOW Current 150 0.5 0.3 150 0.5 0.25 0.5 0.2 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 10. Input and output parameters vary 1:1 with VCC. VEE can vary ï0.46 V / +0.8 V. 11. Outputs are terminated through a 50 W resistor to VCC ï 2.0 V. 12. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. http://onsemi.com 5 MC10E416, MC100E416 Table 7. AC CHARACTERISTICS VCCx = 5.0 V; VEE = 0.0 V or VCCx = 0.0 V; VEE = ï5.0 V (Note 13) 0qC Symbol Min Characteristic fMAX Maximum Toggle Frequency tPLH tPHL Propagation Delay to Output tSKEW Within-Device Skew (Note 14) tSKEW Duty Cycle Skew (Note 15) tJITTER Random Clock Jitter (RMS) VPP(AC) Input Voltage Swing (Differential Configuration) tr tf Rise/Fall Time (20 - 80%) Typ 25qC Max Min Typ 85qC Max Min Typ Max > 2.0 Unit GHz ps d(Diff) 250 350 500 250 350 500 250 350 500 D(SE) 200 350 550 200 350 550 200 350 550 tPLH-tPHL 50 50 50 ps r10 r10 r10 ps