MMBD717LT1G

MMBD717LT1G Common Anode Schottky Barrier Diodes These Schottky barrier diodes are designed for high speed switching applications, circuit protection, and voltage clamping. Extremely low forward voltage reduces conduction loss. Miniature surface mount package is excellent for hand held and portable applications where space is limited. Features • Extremely Fast Switching Speed • Extremely Low Forward Voltage − 0.28 V (Typ) @ IF = 1 mAdc • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS http://onsemi.com 20 VOLT SCHOTTKY BARRIER DETECTOR AND SWITCHING DIODES Compliant MAXIMUM RATINGS (TJ = 125°C unless otherwise noted) Rating CATHODE 1 ANODE 3 Symbol Value Unit Reverse Voltage VR 20 V Forward Power Dissipation @ TA = 25°C Derate above 25°C PF 200 1.6 mW mW/°C Operating Junction Temperature Range TJ −55 to +150 °C Storage Temperature Range Tstg −55 to +150 °C 2 CATHODE 1 SC−70 / SOT−323 CASE 419 STYLE 4 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. MARKING DIAGRAM ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Rating Symbol Min Typ Max Unit V(BR)R 20 − − V Total Capacitance (VR = 1.0 V, f = 1.0 MHz) CT − 2.0 2.5 PF Reverse Leakage (VR = 10 V) (For each individual diode while the second diode is unbiased) IR − 0.05 1.0 mAdc Forward Voltage (IF = 1.0 mAdc) VF − 0.28 0.37 Vdc Reverse Breakdown Voltage (IR = 10 mA) B3 M G G 1 B3 = Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device MMBD717LT1G Package Shipping† SC−70 (Pb−Free) 3,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2011 December, 2011 − Rev. 9 1 Publication Order Number: MMBD717LT1/D MMBD717LT1G 820 W +10 V 2k 100 mH 0.1 mF IF tr tp 0.1 mF IF t trr 10% t DUT 50 W OUTPUT PULSE GENERATOR 50 W INPUT SAMPLING OSCILLOSCOPE 90% iR(REC) = 1 mA IR VR OUTPUT PULSE (IF = IR = 10 mA; measured at iR(REC) = 1 mA) INPUT SIGNAL NOTES: 1. A 2.0 kW variable resistor adjusted for a Forward Current (IF) of 10 mA. 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. 3. tp » trr Figure 1. Recovery Time Equivalent Test Circuit 100 IR , REVERSE CURRENT (μA) IF, FORWARD CURRENT (mA) 10 1.0 150°C TA = 150°C 10 125°C 1.0 85°C 0.1 0.01 25°C 125°C 85°C 25°C -40°C -55°C 0.3 0.4 0.1 0.001 0.05 0.1 0.15 0.2 0.25 0.35 0.45 0.5 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 VF, FORWARD VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Forward Voltage Figure 3. Reverse Current versus Reverse Voltage 3.0 2.5 C T, CAPACITANCE (pF) 0 2.0 1.5 1.0 0.5 0 0 2.0 4.0 6.0 8.0 10 12 VR, REVERSE VOLTAGE (VOLTS) 14 Figure 4. Typical Capacitance http://onsemi.com 2 16 18 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC−70 (SOT−323) CASE 419 ISSUE R DATE 11 OCT 2022 SCALE 4:1 GENERIC MARKING DIAGRAM XX MG G 1 XX M G = Specific Device Code = Date Code = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. STYLE 1: CANCELLED STYLE 6: PIN 1. EMITTER 2. BASE 3. COLLECTOR DOCUMENT NUMBER: DESCRIPTION: STYLE 2: PIN 1. ANODE 2. N.C. 3. CATHODE STYLE 3: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 5: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 7: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 8: PIN 1. GATE 2. SOURCE 3. DRAIN STYLE 9: PIN 1. ANODE 2. CATHODE 3. CATHODE-ANODE STYLE 10: PIN 1. CATHODE 2. ANODE 3. ANODE-CATHODE 98ASB42819B SC−70 (SOT−323) STYLE 11: PIN 1. CATHODE 2. CATHODE 3. CATHODE Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative