Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PN100/PN100A/MMBT100/MMBT100A
NPN General Purpose Amplifier
• This device is designed for general purpose amplifier applications at collector currents to 300mA.
• Sourced from process 10.
C
E
TO-92
B
1
1. Emitter 2. Base 3. Collector
Mark: PN100/PN100A
Absolute Maximum Ratings*
SOT-23
Ta = 25°C unless otherwise noted
Symbol
VCEO
Collector-Emitter Voltage
Parameter
Ratings
VCBO
Collector-Base Voltage
75
VEBO
Emitter-Base Voltage
6.0
IC
Collector current
TJ, Tstg
Junction and Storage Temperature
- Continuous
Units
45
500
-55 ~ +150
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1. These ratings are based on a maximum junction temperature of 150 degrees C.
2.
These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
* Pulse Test: Pulse Width≤300μs, Duty Cycle≤2%
Thermal Characteristics TA=25°C unless otherwise noted
Max.
Symbol
Parameter
PN100
PN100A
625
5.0
PD
Total Device Dissipation
Derate above 25°C
RθJC
Thermal Resistance, Junction to Case
83.3
RθJA
Thermal Resistance, Junction to Ambient
200
*MMBT100
*MMBT100A
350
2.8
Units
mW
mW/°C
°C/W
357
°C/W
* Device mounted on FR-4 PCB 1.6” × 1.6” × 0.06."
© 2008 Fairchild Semiconductor Corporation
PN100/PN100A/MMBT100/MMBT100A Rev. C1
www.fairchildsemi.com
1
PN100/PN100A/MMBT100/MMBT100A — NPN General Purpose Amplifier
October 2008
Symbol
Parameter
Off Characteristics
Collector-Base Breakdown Voltage
BVCBO
Test Condition
Min.
Max.
Units
IC = 10μA, IE = 0
75
BVCEO
Collector-Emitter Breakdown Voltage *
IC = 1mA, IB = 0
45
V
V
BVEBO
Emitter-Base Breakdown Voltage
IE = 10μA, IC = 0
6.0
V
ICBO
Collector-Base Cutoff Current
VCB = 60V
50
nA
ICES
Collector-Emiitter Cutoff Current
VCE = 40V
50
nA
IEBO
Emitter Cutoff Current
VEB = 4V
50
nA
On Characteristics
hFE
DC Current Gain
IC = 100μA, VCE = 1.0V
IC = 10mA, VCE = 1.0V
IC = 100mA, VCE = 1.0V*
IC = 150mA, VCE = 5.0V *
100
100A
100
100A
100
100A
80
240
100
300
100
100
100
450
600
350
VCE(sat)
Collector-Emitter Saturation Voltage
IC = 10mA, IB = 1.0mA
IC = 200mA, IB = 20mA
0.2
0.4
V
V
VBE(sat)
Base-Emitter Saturation Voltage
IC = 10mA, IB = 1.0mA
IC = 200mA, IB = 20mA
0.85
1.0
V
V
Small Signal Characteristics
fT
Current Gain Bandwidth Product
VCE = 20V, IC = 20mA
Cobo
Output Capacitance
VCB = 5.0V, f = 1.0MHz
NF
Noise Figure
IC = 100μA, VCE = 5.0V
RG = 2.0kΩ, f = 1.0KHz
250
100
100A
MHz
4.5
pF
5.0
4.0
dB
dB
* Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2.0%
© 2008 Fairchild Semiconductor Corporation
PN100/PN100A/MMBT100/MMBT100A Rev. C1
www.fairchildsemi.com
2
PN100/PN100A/MMBT100/MMBT100A — NPN General Purpose Amplifier
Electrical Characteristics TC=25°C unless otherwise noted
VCESAT- COLLECTOR-EMITTER VOLTAGE (V)
Vce = 5V
125 °C
300
25 °C
200
- 40 °C
100
0
10
20 30
50
100
200 300
I C - COLLECTOR CURRENT (mA)
500
Voltage vs Collector Current
0.4
β = 10
0.3
25 °C
0.2
125 °C
0.1
- 40 °C
1
Base-Emitter Saturation
Voltage vs Collector Current
Collector Current
1
0.8
- 40 °C
25 °C
0.6
125 °C
0.4
β = 10
0.2
0.1
1
10
100
I C - COLLECTOR CURRENT (mA)
300
1
- 40 °C
0.8
0.6
25 °C
125 °C
0.4
V CE = 5V
0.2
1
10
100
I C - COLLECTOR CURRENT (mA)
500
Figure 4. Base-Emitter On Voltage
vs Collector Current
100
10
f = 1.0 MHz
CAPACITANCE (pF)
VCB = 60V
1
0.1
25
400
Figure 2. Collector-Emitter Saturation Voltage
vs Collector Current
Figure 3. Base-Emitter Saturation Voltage
vs Collector Current
I CBO - COLLE CTOR CURRENT (nA)
10
100
I C - COLLECTOR CURRENT (mA)
Figure 1. Typical Pulsed Current Gain
vs Collector Current
VBEON - BASE-EMITTER ON VOLTAGE (V)
VBESAT - COLLECTOR-EMITTER VOLTAGE (V)
h FE - TYPICAL PULSED CURRENT GAIN
vs Collector Current
400
50
75
100
125
TA - AMBIE NT TEMP ERATURE (° C)
Cib
Cob
1
0.1
0.1
150
1
10
Vce - COLLECTOR VOLTAGE (V)
100
Figure 6. Input and Output Capacitance
vs Reverse Voltag
Figure 5. Collector Cutoff Current
vs Ambient Temperature
© 2008 Fairchild Semiconductor Corporation
PN100/PN100A/MMBT100/MMBT100A Rev. C1
10
www.fairchildsemi.com
3
PN100/PN100A/MMBT100/MMBT100A — NPN General Purpose Amplifier
Typical Characteristics
(Continued)
300
P D - POWER DISSIPATION (mW)
700
270
ts
240
TIME (nS)
210
180
IB1 = IB2 = Ic / 10
V cc = 10 V
150
120
90
tf
60
30
0
10
tr
td
20
30
50
100
200
I C - COLLECTOR CURRENT (mA)
500
TO-92
SOT-23
400
300
200
100
0
300
0
25
50
75
100
TEMPERATURE ( o C)
125
150
Figure 8. Power Dissipation vs
Ambient Temperature
Figure 7. Switching Times vs
Collector Current
© 2008 Fairchild Semiconductor Corporation
PN100/PN100A/MMBT100/MMBT100A Rev. C1
600
www.fairchildsemi.com
4
PN100/PN100A/MMBT100/MMBT100A — NPN General Purpose Amplifier
Typical Characteristics
PN100/PN100A/MMBT100/MMBT100A — NPN General Purpose Amplifier
Package Dimension (TO92)
© 2008 Fairchild Semiconductor Corporation
PN100/PN100A/MMBT100/MMBT100A Rev. C1
www.fairchildsemi.com
5
PN100/PN100A/MMBT100/MMBT100A — NPN General Purpose Amplifier
Package Dimension (SOT23)
© 2008 Fairchild Semiconductor Corporation
PN100/PN100A/MMBT100/MMBT100A Rev. C1
www.fairchildsemi.com
6
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and
is not intended to be an exhaustive list of all such trademarks.
ACEx®
Build it Now™
CorePLUS™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
Power247®
POWEREDGE®
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
Green FPS™
Green FPS™ e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FPS™
FRFET®
Global Power ResourceSM
®
PDP-SPM™
Power220®
SuperSOT™-8
SyncFET™
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
UniFET™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF
THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE
UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF
FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE
PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1.
2.
Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in significant injury to the user.
A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for product development.
Specifications may change in any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild Semiconductor reserves
the right to make changes at any time without notice to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I31
© 2008 Fairchild Semiconductor Corporation
PN100/PN100A/MMBT100/MMBT100A Rev. C1
www.fairchildsemi.com
7
PN100/PN100A/MMBT100/MMBT100A NPN General Purpose Amplifier
TRADEMARKS
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com