MPS6724

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. MPS6724, MPS6725 One Watt Darlington Transistors NPN Silicon http://onsemi.com Features • Pb−Free Packages are Available* COLLECTOR 3 BASE 2 MAXIMUM RATINGS Rating Symbol Collector −Emitter Voltage Value Unit VCEO MPS6724 MPS6725 Collector −Base Voltage Vdc 40 50 EMITTER 1 VCBO MPS6724 MPS6725 Emitter −Base Voltage Vdc 50 60 VEBO 12 Vdc Collector Current − Continuous IC 1000 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 1.0 8.0 W mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 2.5 20 W mW/°C TJ, Tstg −55 to +150 °C Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Ambient RqJA 125 °C/W Thermal Resistance, Junction−to−Case RqJC 50 °C/W Operating and Storage Junction Temperature Range 1 2 TO−92 (TO−226) CASE 29−10 STYLE 1 3 MARKING DIAGRAM THERMAL CHARACTERISTICS MPS 672x AYWW G G Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. MPS672x = Device Code x = 4 or 5 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 February, 2006 − Rev. 3 1 Publication Order Number: MPS6724/D MPS6724, MPS6725 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max 40 50 − − 50 60 − − 12 − − − 100 100 − 100 25,000 4,000 − 40,000 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 1) (IC = 1.0 mAdc, IB = 0) V(BR)CES Vdc MPS6724 MPS6725 Collector −Base Breakdown Voltage (IC = 1.0 mAdc, IE = 0) V(BR)CBO Vdc MPS6724 MPS6725 Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = 30 Vdc, IE = 0) (VCB = 40 Vdc, IE = 0) ICBO nAdc MPS6724 MPS6725 Emitter Cutoff Current (VEB = 10 Vdc, IC = 0) Vdc IEBO nAdc ON CHARACTERISTICS (Note 1) DC Current Gain (IC = 200 mAdc, VCE = 5.0 Vdc) (IC = 1000 mAdc, VCE = 5.0 Vdc) hFE − Collector −Emitter Saturation Voltage (IC = 1000 mAdc, IB = 2.0 mAdc) VCE(sat) − 1.5 Vdc Base −Emitter On Voltage (IC = 1000 mAdc, VCE = 5.0 Vdc) VBE(on) − 2.0 Vdc fT 100 1000 MHz Ccb − 10 pF SMALL− SIGNAL CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 200 mAdc, VCE = 5.0 Vdc, f = 100 MHz) Collector−Base Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) 1. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2.0%. I C , COLLECTOR CURRENT (mA) TYPICAL CHARACTERISTICS CURRENT LIMIT DUTY CYCLE ≤ 10% THERMAL LIMIT SECOND BREAKDOWN LIMIT 3.0 k 2.0 k 100 ms 1.0 ms 1.0 k 1.0 s 500 200 1.5 TA = 25°C TC = 25°C 2.0 5.0 10 20 30 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 1. Active Region — Safe Operating Area http://onsemi.com 2 200 k TJ = 125°C h FE , DC CURRENT GAIN 100 k 70 k 50 k 25°C 30 k 20 k 10 k 7.0 k 5.0 k −55°C VCE = 5.0 V 3.0 k 2.0 k 5.0 7.0 10 20 50 70 100 30 200 300 500 VCE , COLLECTOR EMITTER VOLTAGE (VOLTS) MPS6724, MPS6725 3.0 IC = 50 mA IC = 10 mA 2.5 1.5 1.0 0.5 0.1 0.2 0.5 1.0 2.0 q V , TEMPERATURE COEFFICIENTS (mV/° C) TJ = 25°C V, VOLTAGE (VOLTS) 1.4 VBE(sat) @ IC/IB = 1000 1.2 VBE(on) @ VCE = 5.0 V VCE(sat) @ IC/IB = 1000 5.0 7.0 10 20 30 50 70 100 200 300 500 −1.0 −2.0 *APPLIES FOR IC/IB ≤ hFE/3.0 100 200 500 1000 25°C TO 125°C −55°C TO 25°C −3.0 −4.0 25°C TO 125°C qVB FOR VBE −5.0 −6.0 −55°C TO 25°C 5.0 7.0 10 20 30 50 70 100 200 300 500 IC, COLLECTOR CURRENT (mA) Figure 4. “ON” Voltages Figure 5. Temperature Coefficients 4.0 20 VCE = 5.0 V TJ = 25°C f = 100 MHz 2.0 TJ = 25°C C, CAPACITANCE (pF) h FE , SMALL−SIGNAL CURRENT GAIN 50 *qVC FOR VCE(sat) IC, COLLECTOR CURRENT (mA) 1.0 0.8 0.6 0.4 0.2 20 Figure 3. Collector Saturation Region 1.6 0.6 5.0 10 IB, BASE CURRENT (mA) Figure 2. DC Current Gain 0.8 TJ = 25°C 2.0 IC, COLLECTOR CURRENT (mA) 1.0 IC = 500 mA IC = 250 mA 10 7.0 Cibo 5.0 Cobo 3.0 0.5 1.0 2.0 5.0 10 20 50 100 200 500 2.0 0.04 0.1 0.2 0.4 1.0 2.0 4.0 IC, COLLECTOR CURRENT (mA) VR, REVERSE VOLTAGE (VOLTS) Figure 6. High Frequency Current Gain Figure 7. Capacitance http://onsemi.com 3 10 20 40 MPS6724, MPS6725 ORDERING INFORMATION Device MPS6724 MPS6724G MPS6725 MPS6725G MPS6724RLRA MPS6724RLRAG MPS6725RLRP MPS6725RLRPG Package Shipping † TO−92 TO−92 (Pb−Free) 5000 Units / Bulk TO−92 TO−92 (Pb−Free) 5000 Units / Bulk TO−92 TO−92 (Pb−Free) 2000 Units / Tape & Reel TO−92 TO−92 (Pb−Free) 2000 Units / Tape & Ammo Box †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 4 MPS6724, MPS6725 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−10 ISSUE AL NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. A B R SEATING PLANE P L F K X X DIM A B C D F G H J K L N P R D G H J R 1 2 3 N C SECTION X−X N INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.021 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.135 −−− MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.457 0.533 0.407 0.482 1.15 1.39 2.42 2.66 0.46 0.61 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 3.43 −−− STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: orderlit@onsemi.com http://onsemi.com 5 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MPS6724/D