MURH860CTG
Power Rectifier
These state-of-the-art power rectifiers are designed for use in
switching power supplies, inverters and as free wheeling diodes.
Features
•
•
•
•
•
•
•
•
•
Ultrafast 35 Nanosecond Recovery Times
175°C Operating Junction Temperature
Popular TO-220 Package
Epoxy Meets UL 94 V−0 @ 0.125 in
High Temperature Glass Passivated Junction
High Voltage Capability to 600 V
Low Leakage Specified @ 150°C Case Temperature
Current Derating @ Both Case and Ambient Temperatures
These are Pb−Free Devices*
www.onsemi.com
ULTRAFAST RECTIFIER
8.0 AMPERES, 600 VOLTS
1
2, 4
3
Mechanical Characteristics:
4
• Case: Epoxy, Molded
• Weight: 1.9 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
TO−220AB
CASE 221A
260°C Max. for 10 Seconds
1
2
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
600
V
Average Rectified Forward Current
(Rated VR, TC = 120°C) Total Device
IF(AV)
4.0
8.0
A
Peak Repetitive Forward Current (Rated
VR, Square Wave, 20 kHz, TC = 120°C)
IFM
16
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
IFSM
100
A
TJ, Tstg
−65 to +175
°C
Rating
Symbol
Value
Unit
Max. Thermal Resistance, Junction−to−Case
RqJC
3.0
°C/W
Operating Junction and Storage
Temperature Range
THERMAL CHARACTERISTICS (Per Leg)
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
3
MARKING DIAGRAM
AY WW
UH860G
AKA
A
Y
WW
UH860
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
Device
Package
Shipping
MURH860CTG
TO−220
(Pb−Free)
50 Units/Rail
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2015
January, 2015 − Rev. 6
1
Publication Order Number:
MURH860CT/D
MURH860CTG
ELECTRICAL CHARACTERISTICS (Per Leg)
Rating
Symbol
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 4.0 A, TC = 150°C)
(iF = 4.0 A, TC = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, TC = 150°C)
(Rated DC Voltage, TC = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/ms)
trr
Value
Unit
V
2.5
2.8
mA
500
10
35
ns
100
50
20
TJ = 150°C
10
7
5
3
2
I R , REVERSE LEAKAGE CURRENT (μA)
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%
85°C
25°C
1
0.7
0.5
0.3
0.2
0.1
0
0.5
1
1.5
2
2.5
3
3.5
4
v F , INSTANTANEOUS VOLTAGE (VOLTS)
4.5
5
5
0.2
0.1
0.05
0.02
0.01
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
PF(AV), AVERAGE POWER DISSIPATION (WATTS)
36
TJ = 150°C
28
24
SQUARE
WAVE
16
DC
12
8
4
0
1
2
3
4
5
6
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
25°C
0.5
0
50 100
200
300
400
500
VR, REVERSE VOLTAGE (VOLTS)
600
Figure 2. Typical Reverse Leakage Current, Per Leg
40
20
100°C
2
1
Figure 1. Typical Forward Voltage, Per Leg
32
150°C
50
20
10
7
10
RATED VOLTAGE APPLIED
RqJC = 3°C/W
9
8
7
6
5
SQUARE
DC
4
3
2
1
0
40
60
80
100
120
140
TC, CASE TEMPERATURE (°C)
160
180
Figure 4. Typical Current Derating, Case, Per Leg
Figure 3. Typical Forward Dissipation, Per Leg
www.onsemi.com
2
MURH860CTG
32
28
28
Trr
24
24
20
20
Qrr
16
16
12
12
Vr = 30 V
di/dt = 50 A/ms
8
8
4
0
4
0
1
2
3
4
5
6
7
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
8
C, CAPACITANCE (pF)
Figure 5. Typical Recovery Characteristics
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
0.1
1
10
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Typical Capacitance, Per Leg
www.onsemi.com
3
100
0
Qrr , RECOVERED STORED CHARGE (nC)
Trr, REVERSE RECOVERY TIME (ns)
32
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative