Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
NC7NP14
TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
Features
General Description
■ Space saving US8 package
The NC7NP14 is a triple inverter with Schmitt trigger
input from Fairchild’s Ultra Low Power (ULP) Series of
TinyLogic®. Ideal for applications where battery life is
critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V
VCC.
■ Ultra small MicroPak™ package
■ 0.9V to 3.6V VCC supply operation
■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V
to 3.6V
■ Power-Off high impedance inputs and outputs
The internal circuit is composed of a minimum of inverter
stages, including the output buffer, to enable ultra low
static and dynamic power.
■ Static Drive (IOH/IOL):
– ±2.6mA @ 3.00V VCC
– ±2.1mA @ 2.30V VCC
– ±1.5mA @ 1.65V VCC
– ±1.0mA @ 1.40V VCC
– ±0.5mA @ 1.10V VCC
– ±20µA @ 0.9V VCC
■ Low noise switching using design techniques of
Quiet Series™ noise/EMI reduction circuitry
■ Ultra low dynamic power
The NC7NP14 is designed for optimized power and
speed, and is fabricated with an advanced CMOS technology to achieve high speed, low noise operation while
maintaining extremely low CMOS power dissipation.
Ordering Information
Order
Number
Package
Number
Product Code
Top Mark
NC7NP14K8X
MAB08A
NP14
8-Lead US8, JEDEC MO-187,
Variation CA 3.1mm Wide
3k Units on Tape and
Reel
NC7NP14L8X
MAC08A
X6
8-Lead MicroPak, 1.6mm Wide
5k Units on Tape and
Reel
Package Description
Supplied As
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.
All packages are lead free per JEDEC: J-STD-020B standard.
Battery Life vs. VCC Supply Voltage
700
600
ULP (SP)
500
Battery Life 400
(Days)
300
ULP-A (SV)
200
UHS (SZ)
100
0
0.9 1.2 1.5 1.8
2.5 3.3 5.0
VCC Supply Voltage
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
TinyLogic ULP and ULP-A with up to 50% less power consumption can
extend your battery life significantly.
Battery Life = (Vbattery x Ibattery x 0.9) / (Pdevice) / 24hrs/day
Where, Pdevice = (ICC x VCC) + (CPD + CL) x VCC2 x f
Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH
and derated 90% and device frequency at 10MHz, with CL = 15pF load.
www.fairchildsemi.com
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
September 2008
Logic Symbol
IEEE/IEC
Pin Assignments for US8
Function Table
(Top View)
Y=A
Pin One Orientation Diagram
Input
Output
A
Y
L
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
AAA represents Product Code Top Mark – see ordering
code
Note: Orientation of Top Mark determines Pin One
location. Read the top product code mark left to right,
Pin One is the lower left pin (see diagram).
Pad Assignments for MicroPak
(Top Thru View)
Pin Description
Pin Names
Description
A
Input
Y
Output
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
www.fairchildsemi.com
2
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
Connection Diagrams
Symbol
Parameter
Rating
VCC
Supply Voltage
–0.5V to +4.6V
VIN
DC Input Voltage
–0.5V to +4.6V
VOUT
DC Output Voltage
HIGH or LOW State(1)
VCC = 0V
–0.5V to VCC +0.5V
–0.5V to +4.6V
IIK
DC Input Diode Current @ VIN < 0V
–50mA
IOK
DC Output Diode Current
VOUT < 0V
VOUT > VCC
–50mA
+50mA
DC Output Source/Sink Current
±50mA
IOH / IOL
ICC or Ground
TSTG
DC VCC or Ground Current per Supply Pin
Storage Temperature Range
±50mA
–65°C to +150°C
TJ
Junction Temperature Under Bias
150°C
TL
Junction Lead Temperature (Soldering, 10 seconds)
260°C
PD
Power Dissipation @ +85°C
US8
Micropak-8
245mW
165mW
Recommended Operating Conditions(2)
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
Rating
VCC
Supply Voltage
VIN
Input Voltage
0V to 3.6V
Output Voltage
HIGH or LOW State
VCC = 0V
0V to VCC
0V to 3.6V
VOUT
IOH / IOL
TA
∆t / ∆V
θJA
0.9V to 3.6V
Output Current in IOH / IOL
VCC = 3.0V to 3.6V
VCC = 2.3V to 2.7V
VCC = 1.65V to 1.95V
VCC = 1.40V to 1.60V
VCC = 1.10V to 1.30V
VCC = 0.9V
±2.6mA
±2.1mA
±1.5mA
±1.0mA
±0.5mA
±20µA
Free Air Operating Temperature
–40°C to +85°C
Minimum Input Edge Rate @ VIN = 0.8V to 2.0V, VCC = 3.0V
Thermal Resistance
US8
Micropak-8
10ns/V
265°C/W
395°C/W
Notes:
1. IO Absolute Maximum Rating must be observed.
2. Unused inputs must be held HIGH or LOW. They may not float.
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
www.fairchildsemi.com
3
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
TA = +25°C
Symbol
VP
VN
VH
VOH
VOL
VCC (V)
Parameter
Positive
Threshold
Voltage
Negative
Threshold
Voltage
Hysteresis
Voltage
HIGH Level
Output Voltage
LOW Level
Output Voltage
Conditions
Min.
Max.
Min.
Max.
Units
0.90
0.3
0.6
0.3
0.6
V
1.10
0.4
1.0
0.4
1.0
1.40
0.5
1.2
0.5
1.2
1.65
0.7
1.5
0.7
1.5
2.30
1.0
1.9
1.0
1.9
3.00
1.5
2.6
1.5
2.6
0.90
0.1
0.6
0.1
0.6
1.10
0.15
0.7
0.15
0.7
1.40
0.2
0.8
0.2
0.8
1.65
0.25
0.9
0.25
0.9
2.30
0.4
1.15
0.4
1.15
3.00
0.6
1.5
0.6
1.5
0.90
0.07
0.5
0.07
0.5
1.10
0.08
0.6
0.08
0.6
1.40
0.09
0.8
0.09
0.8
1.65
0.10
1.0
0.10
1.0
2.30
0.25
1.1
0.25
1.1
3.00
0.60
1.8
0.60
1.8
0.90
IOH = –20µA
VCC – 0.1
VCC – 0.1
1.10 ≤ VCC ≤ 1.30
VCC – 0.1
VCC – 0.1
1.40 ≤ VCC ≤ 1.60
VCC – 0.1
VCC – 0.1
1.65 ≤ VCC ≤ 1.95
VCC – 0.1
VCC – 0.1
2.30 ≤ VCC < 2.70
VCC – 0.1
VCC – 0.1
3.00 ≤ VCC ≤ 3.60
VCC – 0.1
VCC – 0.1
1.10 ≤ VCC ≤ 1.30
IOH = –0.5mA
0.75 x VCC
0.70 x VCC
1.40 ≤ VCC ≤ 1.60
IOH = –1.0mA
1.07
0.99
1.65 ≤ VCC ≤ 1.95
IOH = –1.5mA
1.24
1.22
2.30 ≤ VCC < 2.70
IOH = –2.1mA
1.95
1.87
3.00 ≤ VCC < 3.60
IOH = –2.6mA
2.61
0.90
IOL = 20µA
Power Off
Leakage Current
ICC
Quiescent
Supply Current
V
2.55
0.1
0.1
1.10 ≤ VCC ≤ 1.30
0.1
0.1
0.1
0.1
1.65 ≤ VCC ≤ 1.95
0.1
0.1
2.30 ≤ VCC < 2.70
0.1
0.1
0.1
0.1
1.10 ≤ VCC ≤ 1.30
IOL = 0.5mA
0.30 x VCC
0.30 x VCC
1.40 ≤ VCC ≤ 1.60
IOL = 1.0mA
0.31
0.37
1.65 ≤ VCC ≤ 1.95
IOL = 1.5mA
0.31
0.35
2.30 ≤ VCC < 2.70
IOL = 2.1mA
0.31
0.33
V
3.00 ≤ VCC < 3.60
IOL = 2.6mA
0.31
0.33
0.90 to 3.60
0 ≤ VI ≤ 3.6V
±0.1
±0.5
µA
0 ≤ (VI, VO) ≤ 3.6V
0.5
0.5
µA
VI = VCC or GND
0.9
0.9
µA
Input Leakage
Current
IOFF
V
V
1.40 ≤ VCC ≤ 1.60
3.00 ≤ VCC ≤ 3.60
IIN
TA = –40°C to +85°C
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
0
0.90 to 3.60
www.fairchildsemi.com
4
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
DC Electrical Characteristics
TA = +25°C
Symbol
Parameter
tPHL, tPLH Propagation
Delay
VCC (V)
Conditions
0.90
CL = 10pF, RL = 1MΩ
Min.
Typ. Max.
TA = –40°C to
+85°C
Min.
Figure
Max. Units Number
66.0
1.10 ≤ VCC ≤ 1.30
3.5
24.0
34.5
3.0
41.6
1.40 ≤ VCC ≤ 1.60
2.5
7.0
14.8
2.0
15.0
1.65 ≤ VCC ≤ 1.95
2.0
6.0
12.0
1.5
12.2
2.30 ≤ VCC < 2.70
1.5
5.0
9.4
1.0
9.9
4.0
8.3
1.0
9.0
3.00 ≤ VCC ≤ 3.60
0.90
1.0
CL = 15pF, RL = 1MΩ
71.0
1.10 ≤ VCC ≤ 1.30
4.0
28.0
37.3
3.5
46.3
1.40 ≤ VCC ≤ 1.60
3.0
8.0
15.5
2.5
16.5
1.65 ≤ VCC ≤ 1.95
2.5
6.0
12.6
2.0
13.6
2.30 ≤ VCC < 2.70
2.0
5.0
9.9
1.5
10.8
4.0
8.7
1.0
9.5
3.00 ≤ VCC ≤ 3.60
0.90
1.5
CL = 30pF, RL = 1MΩ
76.0
1.10 ≤ VCC ≤ 1.30
5.0
31.0
39.3
4.0
49.7
1.40 ≤ VCC ≤ 1.60
4.0
9.0
17.8
3.5
18.2
1.65 ≤ VCC ≤ 1.95
3.0
7.0
14.4
2.0
15.9
2.30 ≤ VCC < 2.70
2.0
6.0
11.3
1.5
12.8
3.00 ≤ VCC ≤ 3.60
1.5
5.0
9.2
1.0
10.7
CIN
Input
Capacitance
0
CPD
Power
Dissipation
Capacitance
0.90 to 3.60
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
VI = 0V or VCC,
f = 10MHz
ns
Figure 1
Figure 2
ns
Figure 1
Figure 2
ns
Figure 1
Figure 2
2.0
pF
8.0
pF
www.fairchildsemi.com
5
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
AC Electrical Characteristics
tFALL = 3ns
tRISE = 3ns
VCC
90%
Input
GND
50%
10%
10%
tW
VCC
TEST
SIGNAL
90%
50%
tPLH
tPHL
DUT
VOH
RL Ω
CL pF
Output
50%
50%
VOL
Figure 1. AC Test Circuit
Figure 2. AC Waveforms
VCC
Symbol
3.3V ± 0.3V
2.5V ± 0.2V
1.8V ± 0.15V
1.5V ± 0.1V
1.2V ± 0.1V
0.9V
Vmi
1.5V
VCC / 2
VCC / 2
VCC / 2
VCC / 2
VCC / 2
Vmo
1.5V
VCC / 2
VCC / 2
VCC / 2
VCC / 2
VCC / 2
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
www.fairchildsemi.com
6
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
AC Loading and Waveforms
Tape Format for US8
Package Designator
Tape Section
Number of Cavities
Cavity Status
Cover Tape Status
K8X
Leader (Start End)
125 (typ.)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typ.)
Empty
Sealed
Tape Dimensions inches (millimeters)
Tape Format for MicroPak
Package Designator
Tape Section
Number of Cavities
Cavity Status
Cover Tape Status
L8X
Leader (Start End)
125 (typ.)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typ.)
Empty
Sealed
Tape Dimensions inches (millimeters)
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
www.fairchildsemi.com
7
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
Tape and Reel Specifications
Reel Dimensions inches (millimeters)
Tape
Size
8mm
A
B
7.0
(177.8)
0.059
(1.50)
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
C
D
N
0.512
0.795
2.165
(13.00) (20.20) (55.00)
W1
W2
W3
0.331 +0.059/–0.000
(8.40 +1.50/–0.00)
0.567
(14.40)
W1 +0.078/–0.039
(W1 +2.00/–1.00)
www.fairchildsemi.com
8
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
Tape and Reel Specifications (Continued)
8
5
0.70
-B-
2.3±0.1
3.1±.1
2.70
0.15
3.40
-A-
1.80
1.00
1.55
0.30 TYP
1
0.2 C B A
ALL LEAD TIPS
4
PIN #1 IDENT.
ALL LEAD TIPS
0.1 C
0.90 MAX
0.5 TYP
DETAIL A
0.70±0.10
0.10-0.18
-C0.10
0.00
0.17-0.27
0.13
0.50TYP
A B
C
0.4 TYP
GAGE PLANE
0.12
0°-8°
A. CONFORMS TO JEDEC REGISTRATION MO-187
B. DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH,
AND TIE BAR EXTRUSIONS.
SEATING PLANE
DETAIL A
D. DIMENSIONS AND TOLERANCES PER ANSI Y14.5M, 1982.
MAB08AREVC
Figure 3. 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
www.fairchildsemi.com
9
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
Physical Dimensions
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
Physical Dimensions (Continued)
Figure 4. 8-Lead MicroPak, 1.6mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
www.fairchildsemi.com
10
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™ *
™
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
®
FACT
®
FAST
FastvCore™
FlashWriter® *
FPS™
F-PFS™
®
FRFET
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
®
OPTOPLANAR
®
PowerTrench®
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
PDP SPM™
Power-SPM™
®
The Power Franchise
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
®
* EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The
datasheet is for reference information only.
Rev. I36
©2005 Fairchild Semiconductor Corporation
NC7NP14 Rev. 1.0.0
www.fairchildsemi.com
11
NC7NP14 — TinyLogic® ULP Triple Inverter with Schmitt Trigger Input
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
工商网监
湘ICP备2023018690号
