NC7WZ17
TinyLogic UHS Dual Buffer
with Schmitt Trigger Inputs
Description
The NC7WZ17 is a dual buffer with Schmitt trigger inputs from
ON Semiconductor’s Ultra−High Speed (UHS) series of TinyLogic
products. The device is fabricated with advanced CMOS technology to
achieve ultra−high speed with high output drive, while maintaining
low static power dissipation over a very broad VCC operating range.
The device is specified to operate over the 1.65 V to 5.5 V VCC range.
The inputs and outputs are high−impedance when VCC is 0 V. Inputs
tolerate voltages up to 5.5 V, independent of VCC operating voltage.
Schmitt trigger inputs achieve 1 V typical hysteresis between the
positive− and negative−going input threshold voltage at 5 V.
www.onsemi.com
MARKING
DIAGRAMS
SIP6 1.45x1.0
CASE 127EB
Pin 1
Features
•
•
•
•
•
•
•
•
•
•
Ultra−High Speed: tPD 3.6 ns (Typical) into 50 pF at 5 V VCC
High Output Drive: ±24 mA at 3 V VCC
Broad VCC Operating Range: 1.65 V to 5.5 V
Matches Performance of LCX when Operated at 3.3 V VCC
Power Down High−Impedance Inputs / Outputs
Over−Voltage Tolerance Inputs Facilitate 5 V to 3 V Translation
Proprietary Noise / EMI Reduction Circuitry
Ultra−Small MicroPak™ Packages
Space−Saving SC70 Package
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
UDFN6
1.0X1.0, 0.35P
CASE 517DP
1
SC−88
(SC−70 6 Lead)
1.25x2
CASE 419AD−01
A5, Z17
KK
XY
Z
A2
T
Y1
A5KK
XYZ
Pin 1
IEEC / IEC
A1
A5KK
XYZ
Z17T
= Specific Device Code
= 2−Digit Lot Run Traceability Code
= 2−Digit Date Code Format
= Assembly Plant Code
= Year Coding Scheme
= Plant Code Identifier
= Die Run Code
= Eight−Week Datacoding Scheme
Y2
ORDERING INFORMATION
Figure 1. Logic Symbol
© Semiconductor Components Industries, LLC, 1999
July, 2019 − Rev. 3
See detailed ordering, marking and shipping information in the
package dimensions section on page 6 of this data sheet.
1
Publication Order Number:
NC7WZ17/D
NC7WZ17
Pin Configurations
A1 1
6
Y1
GND 2
5
VCC
A2 3
4
Y2
A1 1
GND 2
A2 3
Figure 2. SC70 (Top View)
6 Y1
5 VCC
4 Y2
Figure 3. MicroPak (Top Through View)
AAA
Pin One
NOTES:
1. AAA represents Product Code Top Mark (see ordering code).
2. Orientation of Top Mark determines Pin One location. Read the
top product code mark left to right, Pin One is the lower left pin.
Figure 4. SC70 Pin 1 Orientation
PIN DEFINITIONS
FUNCTION TABLE (Y = A)
Pin # SC70
Pin # MicroPak
Name
1
1
A1
Inputs
Output
Input
2
2
GND
3
3
4
Description
A
Y
Ground
L
L
A2
Input
H
H
4
Y2
Output
5
5
VCC
6
6
Y1
H = HIGH Logic Level
L = LOW Logic Level
Supply Voltage
Output
www.onsemi.com
2
NC7WZ17
ABSOLUTE MAXIMUM RATINGS
Symbol
Min
Max
Unit
VCC
Supply Voltage
Parameter
−0.5
6.5
V
VIN
DC Input Voltage
−0.5
6.5
V
DC Output Voltage
−0.5
6.5
V
VOUT
IIK
DC Input Diode Current
VIN < −0.5 V
−
−50
mA
IOK
DC Output Diode Current
VOUT < 0.5 V
−
−50
mA
IOUT
DC Output Current
−
±50
mA
DC VCC or Ground Current
−
±100
mA
−65
+150
°C
ICC or IGND
TSTG
Storage Temperature Range
TJ
Junction Temperature Under Bias
−
+150
°C
TL
Junction Lead Temperature (Soldering, 10 Seconds)
−
+260
°C
PD
Power Dissipation in Still Air
SC70−6
−
190
mW
MicroPak−6
−
327
MicroPak2™−6
−
327
Human Body Model, JEDEC: JESD22−A114
−
4000
Charge Device Model, JEDEC: JESD22−C101
−
2000
ESD
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VIN
VOUT
Parameter
Conditions
Min
Max
Unit
Supply Voltage Operating
1.65
5.50
V
Supply Voltage Data Retention
1.50
5.5
0
5.5
Input Voltage
Output Voltage
TA
Operating Temperature
qJA
Thermal Resistance
V
0
VCC
V
−40
+85
°C
SC70−6
−
659
°C/W
MicroPak−6
−
382
MicroPak2−6
−
382
°C/W
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
3. Unused inputs must be held HIGH or LOW. They may not float.
DC ELECTICAL CHARACTERISTICS
TA = 25°C
TA = −40 to 85°C
Min
Typ
Max
Min
Max
Unit
1.65
−
1.00
1.40
−
1.40
V
1.80
−
1.07
1.50
−
1.50
2.30
−
1.38
1.80
−
1.80
3.00
−
1.74
2.20
−
2.20
4.50
−
2.43
3.10
−
3.10
5.50
−
2.88
3.60
−
3.60
Symbol
Parameter
VCC (V)
VP
Positive Threshold Voltage
Conditions
www.onsemi.com
3
NC7WZ17
DC ELECTICAL CHARACTERISTICS (continued)
TA = −40 to 85°C
TA = 25°C
Min
Typ
Max
Min
Max
Unit
1.65
0.20
0.50
−
0.20
−
V
1.80
0.25
0.56
−
0.25
−
2.30
0.40
0.75
−
0.40
−
3.00
0.60
0.98
−
0.60
−
4.50
1.00
1.42
−
1.00
−
5.50
1.20
1.68
−
1.20
−
1.65
0.10
0.48
0.90
0.10
0.90
1.80
0.15
0.51
1.00
0.15
1.00
2.30
0.25
0.62
1.10
0.25
1.10
3.00
0.40
0.76
1.20
0.40
1.20
4.50
0.60
1.01
1.50
0.60
1.50
5.50
0.70
1.20
1.70
0.70
1.70
1.55
1.65
−
1.55
−
1.70
1.80
−
1.70
−
2.30
2.20
2.30
−
2.20
−
3.00
2.90
3.00
−
2.90
−
Symbol
Parameter
VCC (V)
VN
Negative Threshold Voltage
VH
VOH
Hysteresis Voltage
HIGH Level Output Voltage
1.65
1.80
Conditions
VIN = VIH,
IOH = −100 mA
4.50
VOL
LOW Level Output Voltage
4.40
4.50
−
4.40
−
1.65
IOH= −4 mA
1.29
1.52
−
1.29
−
2.30
IOH= −8 mA
1.90
2.14
−
1.90
−
3.00
IOH= −16 mA
2.40
2.75
−
2.40
−
3.00
IOH= −24 mA
2.30
2.62
−
2.30
−
4.50
IOH= −32 mA
3.80
4.13
−
3.80
−
1.65
VIN = VIL,
IOL = 100 mA
−
0.00
0.10
−
0.10
1.80
IIN
Input Leakage Current
IOFF
Power Off Leakage Current
ICC
Quiescent Supply Current
−
0.00
0.10
−
0.10
2.30
−
0.00
0.10
−
0.10
3.00
−
0.00
0.10
−
0.10
4.50
−
0.00
0.10
−
0.10
V
V
V
1.65
IOL = 4 mA
−
0.08
0.24
−
0.24
2.30
IOL = 8 mA
−
0.10
0.30
−
0.30
3.00
IOL = 16 mA
−
0.16
0.40
−
0.40
3.00
IOL = 24 mA
−
0.24
0.55
−
0.55
4.50
IOL = 32 mA
−
0.25
0.550
−
0.55
VIN = 5.5 V, GND
−
−
±0.1
−
±1.0
mA
VIN or VOUT = 5.5 V
−
−
1
−
10
mA
VIN = 5.5 V, GND
−
−
1
−
10
mA
1.65 to 5.5
0
1.65 to 5.50
www.onsemi.com
4
NC7WZ17
AC ELECTRICAL CHARACTERISTICS
TA = 25°C
Symbol
tPLH, tPHL
Parameter
VCC (V)
Propagation Delay
(Figure 5, 6)
Typ
Max
Min
Max
Unit
−
8.3
14.3
−
15.8
ns
−
6.9
11.9
−
13.1
2.50 ±0.20
−
4.8
8.2
−
9.0
3.30 ±0.30
−
3.7
5.6
−
6.2
5.00 ±0.50
−
3.0
4.7
−
5.2
−
4.3
6.6
−
7.3
−
3.6
5.6
−
6.2
0
−
2.5
−
−
−
pF
3.30
−
10.0
−
−
−
pF
5.00
−
12.0
−
−
−
CL = 15 pF,
RL = 1 MW
1.80
3.30 ±0.30
5.00 ±0.50
Input Capacitance
CPD
Power Dissipation Capacitance
(Note 4) (Figure 7)
TA = −40 to 85°C
Min
1.65
CIN
Conditions
CL = 50 pF,
RL = 500 W
4. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at
no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic operating current by the expression:
ICCD = (CPD) (VCC) (fIN) + (ICCstatic).
tr = 3 ns
VCC
VCC
90%
OUTPUT
CL
10%
GND
RL
NOTE:
5. CL includes load and stray capacitance;
Input PRR = 1.0 MHz, tW = 500 ns
90%
50%
INPUT
INPUT
tf = 3 ns
VOH
50%
tW
tPLH
tPHL
50%
OUTPUT
VOL
Figure 5. AC Test Circuit
Figure 6. AC Waveforms
VCC
A
INPUT
NOTE:
6. Input = AC Waveform; tr = tf = 1.8 ns;
PRR = 10 MHz; Duty Cycle = 50%.
Figure 7. ICCD Test Circuit
www.onsemi.com
5
10%
50%
NC7WZ17
DEVICE ORDERING INFORMATION
Top Mark
Packages
Shipping†
NC7WZ17P6X
Z17
6−Lead SC70, EIAJ SC−88a, 1.25 mm Wide
3000 / Tape & Reel
NC7WZ17L6X
A5
6−Lead MicroPak, 1.00 mm Wide
5000 / Tape & Reel
NC7WZ17FHX
A5
6−Lead, MicroPak2, 1x1 mm Body, .35 mm Pitch
5000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MicroPak and MicroPak2 are trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other
countries.
www.onsemi.com
6
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SIP6 1.45X1.0
CASE 127EB
ISSUE O
DOCUMENT NUMBER:
DESCRIPTION:
98AON13590G
SIP6 1.45X1.0
DATE 31 AUG 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SC−88 (SC−70 6 Lead), 1.25x2
CASE 419AD−01
ISSUE A
SYMBOL
D
e
e
E1 E
DATE 07 JUL 2010
MIN
MAX
A
0.80
1.10
A1
0.00
0.10
A2
0.80
1.00
b
0.15
0.30
c
0.10
0.18
D
1.80
2.00
2.20
E
1.80
2.10
2.40
E1
1.15
1.25
1.35
0.65 BSC
e
L
TOP VIEW
NOM
0.26
0.36
L1
0.42 REF
L2
0.15 BSC
0.46
θ
0º
8º
θ1
4º
10º
q1
A2 A
q
b
q1
L
L1
A1
SIDE VIEW
c
L2
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-203.
DOCUMENT NUMBER:
DESCRIPTION:
98AON34266E
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
SC−88 (SC−70 6 LEAD), 1.25X2
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
UDFN6 1.0X1.0, 0.35P
CASE 517DP
ISSUE O
DOCUMENT NUMBER:
DESCRIPTION:
98AON13593G
UDFN6 1.0X1.0, 0.35P
DATE 31 AUG 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
1
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative