NCP458R, NCP459
4 A Single Load Switch for
Low Voltage Rail
The NCP458R and NCP459 are power load switch with very low
Ron NMOSFET controlled by external logic pin, allowing
optimization of battery life, and portable device autonomy.
Indeed, thanks to a best in class current consumption optimization
with NMOS structure, leakage currents are drastically decreased.
Offering optimized leakages isolation on the ICs connected on the
battery.
Output discharge path is proposed, in the NCP459 version , to
eliminate residual voltages on the external components connected on
output pin.
Reverse voltage protection, from OUT to IN is offered in the
NCP458R version.
Proposed in wide input voltage range from 0.75 V to 5.5 V, and a
very small CSP8 1 x 2 mm2.
http://onsemi.com
MARKING
DIAGRAM
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
PINOUT
Features
•
•
•
•
•
•
•
•
XXXX
AYWWG
WLCSP8
CASE 567HD
0.75 V − 5.5 V Operating Range
11 mW N−MOSFET
Vbias Rail Input
DC Current up to 4 A
Output Auto−Discharge Option
Reverse Blocking Option
Active High EN Pin
CSP8, 1 x 2 mm2, Pitch 0.5 mm
1
2
A
EN
GATE
B
IN
OUT
C
IN
OUT
D
VBIAS
GND
Typical Applications
•
•
•
•
•
Notebooks
Tablets
Wireless
Mobile Phones
Digital Cameras
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information on page 12 of
this data sheet.
Vcc
V+
LS
NCP458−459
SMPS
DCDC Converter
B1
OUT
C1 IN
OUT
A2 IN
D1 Gate EN
Vbias GND
or
LDO
B2
C2
A1
D2
Platform IC’n
ENx
EN
0
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2014
June, 2014 − Rev. 1
1
Publication Order Number:
NCP458R/D
NCP458R, NCP459
LS
NCP458−459
DCDC Converter
B1
C1
A2
D1
or
LDO
IN
OUT
IN
OUT
Gate
EN
Vbias GND
B2
C2
A1
D2
Platform IC’n
ENx
EN
0
Figure 2. Application Schematic with Vbias Connected to IN and No Gate Delay
PIN FUNCTION DESCRIPTION
Pin Name
Pin Number
Type
Description
EN
A1
INPUT
IN
B1, C1
POWER
Enable input, logic high turns on power switch .
Load−switch input pin.
VBIAS
D1
POWER
External supply voltage input.
GATE
A2
INPUT
OUT
B2, C2
POWER
Load−switch output pin.
GND
D2
POWER
Ground connection.
OUT pin slew rate control (trise).
http://onsemi.com
2
NCP458R, NCP459
BLOCK DIAGRAMS
IN: B1, C1
OUT : B2, C 2
GATE : A2
Gate driver
Control
logic
&
Charge
Pump
EN: A1
GND : D2
VBIAS : D1
Figure 3. NCP458R Block Diagram
IN: B1, C1
OUT : B2 , C 2
GATE : A2
Control
logic
&
Charge
Pump
Gate driver
GND : D 2
VBIAS : D 1
EN : A1
Figure 4. NCP459 Block Diagram
http://onsemi.com
3
NCP458R, NCP459
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VEN, VIN , VOUT,
VBIAS, VGATE
−0.3 to +6.5
V
From IN to OUT Pins: Input/Output (Note 1) NCP459
VIN , VOUT
0 to + 6.5
V
From IN to OUT Pins: Input/Output (Note 1) NCP458R
VIN , VOUT
±6.5
V
Human Body Model (HBM) ESD Rating are (Note 2)
ESD HBM
2000
V
Machine Model (MM) ESD Rating are (Note 2)
ESD MM
200
V
LU
100
mA
TJ
−40 to + 125
°C
Storage Temperature Range
TSTG
−40 to + 150
°C
Moisture Sensitivity (Note 4)
MSL
Level 1
IN, OUT, EN, VBIAS, GATE Pins: (Note 1)
Latch−up protection (Note 3)
− Pins IN, OUT, EN, VBIAS and GATE
Maximum Junction Temperature
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. According to JEDEC standard JESD22−A108.
2. This device series contains ESD protection and passes the following tests:
Human Body Model (HBM) ±2.0 kV per JEDEC standard:
JESD22−A114 for all pins.
Machine Model (MM) ±250 V per JEDEC standard: JESD22−A115 for all pins.
3. Latch up Current Maximum Rating: ±100 mA per JEDEC standard: JESD78 class II.
4. Moisture Sensitivity Level (MSL): 1 per IPC/JEDEC standard: J−STD−020.
OPERATING CONDITIONS
Symbol
Parameter
Max
Unit
0.75
5.5
V
0
5.5
V
Bias voltage (VBIAS ≥ best of VIN, VOUT)
1.2
5.5
V
TA
Ambient Temperature Range
− 40
+ 85
°C
CIN
Decoupling input capacitor
100
nF
COUT
Decoupling output capacitor
100
nF
RqJA
Thermal Resistance Junction to Air
VIN
Operational Power Supply
VEN
Enable Voltage
VBIAS
Conditions
Min
CSP8 (Note 5)
PD
25
°C/W
90
DC current
IOUT
Typ
4
4.5
A
AC current 1 ms @ 217 Hz
5
A
AC current 100 ms spike
15
A
Power Dissipation Rating (Note 6)
0.315
W
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
5. The RqJA is dependent of the PCB heat dissipation and thermal via.
6. The maximum power dissipation (PD) is given by the following formula:
PD +
http://onsemi.com
4
T JMAX * T A
R qJA
NCP458R, NCP459
ELECTRICAL CHARACTERISTICS Min & Max Limits apply for TA between −40°C to +85°C for VIN between 0.75 V and 5.5 V,
and VBIAS between 1.2 V and 5.5 V (Unless otherwise noted). Typical values are referenced to TA = + 25°C, VIN = 3.3 V and
VBIAS = 5 V (Unless otherwise noted).
Parameter
Symbol
Conditions
Min
Typ
Max
11
20
Unit
POWER SWITCH
TA = 25°C
VIN = VBIAS = 5.5 V
TJ = 125°C
TA = 25°C
VIN = VBIAS = 3.3 V
TJ = 125°C
TA = 25°C
VIN = VBIAS = 1.8 V
RDS(on)
Static drain−source
on−state resistance
for each rail
TA = 25°C
VIN = VBIAS = 1.5 V
13
TA = 25°C
13
VIN = 0.8 V
VBIAS = 1.2 V
14
20
24
30
17
30
EN = low, NCP459
230
300
No cap on GATE pin
0.26
Gate capacitor = 1 nF
1.5
Gate capacitor = 10 nF
15
Without Cgate
10
ms
With 1 nF on Gate
60
ms
50
ms
From EN to 90% Vout
75
ms
No cap on GATE pin
0.25
TJ = 125°C
Output discharge
path
mW
24
TJ = 125°C
TA = 25°C
20
24
TJ = 125°C
VIN = 1.0 V
VBIAS = 1.2 V
20
24
TJ = 125°C
TA = 25°C
20
24
12
TJ = 125°C
VIN = VBIAS = 1.2 V
RDIS
24
11
35
W
TIMINGS
TR
Output rise time
From 10% to 90% of
VOUT
Ten
Enable time From En
Vih to 10% of VOUT
TF
Fall Time. From 90%
to 10% of VOUT
Tdis
TR
Ten
VIN = 5 V
CLOAD = 1 mF,
RLOAD = 25 W
Disable time
Output rise time
From 10% to 90% of
VOUT
Enable time
From En Vih to 10%
of VOUT
TF
Output fall time
From 90% to 10% of
VOUT
TR
Output rise time From
10% to 90% of VOUT
Ten
Enable time From En
Vih to 10% of VOUT
TF
Output fall time From
90% to 10% of VOUT
VIN = 3.3 V
CLOAD = 1 mF,
RLOAD = 25 W
Gate capacitor = 1 nF
1
Gate capacitor = 10 nF
10
ms
0.5
ms
Without Cgate, NCP459
20
50
ms
Without Cgate, NCP458R
90
150
ms
With 1 nF on Gate
114
60
VIN = 1.8 V
CLOAD = 1 mF,
RLOAD = 25 W
ms
120
ms
No cap on GATE pin
0.12
Gate capacitor = 1 nF
0.6
Gate capacitor = 10 nF
5.5
Without Cgate
15
ms
With 1 nF on Gate
85
ms
35
ms
ms
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
7. Parameters are guaranteed for CLOAD and RLOAD connected to the OUT pin with respect to the ground
http://onsemi.com
5
NCP458R, NCP459
ELECTRICAL CHARACTERISTICS Min & Max Limits apply for TA between −40°C to +85°C for VIN between 0.75 V and 5.5 V,
and VBIAS between 1.2 V and 5.5 V (Unless otherwise noted). Typical values are referenced to TA = + 25°C, VIN = 3.3 V and
VBIAS = 5 V (Unless otherwise noted).
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
TIMINGS
Output rise time
From 10% to 90% of
VOUT
VIN = 1 V
CLOAD = 1 mF,
RLOAD = 25 W
Ten
Enable time From En
Vih to 10% of VOUT
TF
Output fall time
VIN = 1 V
CLOAD = 1 mF,
RLOAD = 25 W
TR
No cap on GATE pin
0.01
Gate capacitor = 1 nF
1
Gate capacitor = 10 nF
13
ms
Without Cgate
10
ms
With 1 nF on Gate
0.4
ms
20
ms
Logic
VIH
High−level input
voltage
VIL
Low−level input
voltage
REN
Pull down resistor
0.9
V
3
0.4
V
7
MW
REVERSE CURRENT BLOCKING
Vrev_thr
Reverse threshold
Vrev_hyst
Reverse threshold
hysteresis
Trev
Reverse comparator
response time
VOUT − VIN
45
mV
60
mV
VOUT − Vin > Vrev_thr
2.5
ms
VBIAS = 3.3 V, EN = high
1.5
6
mA
EN = high
0.01
0.3
mA
EN = low, IN standby current, VIN = 3.3 V, without
discharge path.
0.01
0.3
mA
QUIESCENT CURRENT− NCP458R
IVBIAS
IINQ
ISTBIN
VBIAS Quiescent
current
IN Quiescent current
Standby current IN
ISTDVbias
Standby current
VBIAS
VBIAS = 3.3 V EN = low
0.4
1.5
mA
Iout_leak
Output leakage
current
IN connected to GND, VOUT = 5 V
0.01
0.5
mA
VBIAS = 3.3 V, EN = high
1.3
5
mA
EN = high
0.01
0.3
mA
EN = low, IN standby current, VIN = 3.3 V, with
discharge path. NCP459.
0.01
0.3
mA
VBIAS = 3.3 V EN = low
0.4
1.5
mA
QUIESCENT CURRENT − NCP459
IVBIAS
IINQ
ISTBIN
ISTDVbias
VBIAS Quiescent
current
IN Quiescent current
Standby current IN
Standby current
VBIAS
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
7. Parameters are guaranteed for CLOAD and RLOAD connected to the OUT pin with respect to the ground
http://onsemi.com
6
NCP458R, NCP459
TIMINGS
VIN
EN
VOUT
T EN T R
T DIS
T ON
TF
T OFF
Figure 5. Enable, Rise and Fall Time
http://onsemi.com
7
NCP458R, NCP459
TYPICAL CHARACTERISTICS
25
6.0
5.8
5.6
5.4
125°C
15
REN (MW)
RDS(on) (mW)
20
85°C
25°C
10
−40°C
−40°C
5.0
25°C
4.8
85°C
4.6
125°C
4.4
5
4.2
0
0.8
1.3
1.8
2.3
2.8 3.3
VIN (V)
3.8
4.3
4.8
4.0
0.5
5.3
0.60
300
0.50
ISTDVBIAS (mA)
250
200
150
100
−40°C
25°C
50
85°C
125°C
0
0.75 1.25 1.75 2.25 2.75 3.25 3.75 4.25 4.75 5.25
VIN (V)
5.5
0.30
0.20
−40°C
25°C
85°C
125°C
0.10
0
1
2
3
4
VBIAS (V)
5
Figure 9. NCP458R Standby Current (mA) vs
VBIAS (V), Over Temperature Range
0.50
4.0
0.45
3.5
0.40
3.0
0.35
IVBIAS (mA)
ISTDVBIAS (mA)
4.5
0.40
Figure 8. Discharge Resistor (W) vs VIN (V),
Over Temperature Range
0.30
0.25
0.20
0.15
0.05
3.5
Figure 7. Pull Down Resistor (MW) vs VEN (V),
Over Temperature Range
350
0.10
2.5
VEN (V)
Figure 6. RDS(on) (mW) vs VIN (V), Over
Temperature Range
RDIS (W)
1.5
2.5
2.0
1.5
−40°C
25°C
85°C
125°C
1.0
−40°C
25°C
85°C
125°C
0.5
0
0
0.75 1.25 1.75 2.25 2.75 3.25 3.75 4.25 4.75 5.25
VBIAS (V)
1
Figure 10. NCP459 Standby Current (mA) vs
VBIAS (V), Over Temperature Range
2
3
4
VBIAS (V)
5
Figure 11. NCP458R Quiescent Current (mA) vs
VBIAS (V), Over Temperature Range
http://onsemi.com
8
NCP458R, NCP459
TYPICAL CHARACTERISTICS
3.0
10k
−40°C
25°C
85°C
125°C
2.5
TEN (ms)
I_VBIAS (mA)
1k
2.0
1.5
100
1.0
−40°C
25°C
85°C
125°C
0.5
10
1
0.8
0
0.75 1.25 1.75 2.25 2.75 3.25 3.75 4.25 4.75 5.25
VBIAS (V)
Figure 12. NCP459 Quiescent Current (mA) vs
VBIAS (V), Over Temperature Range
TDIS (ms)
2.3
2.8 3.3
VIN (V)
3.8
4.3
4.8
1
0.8
5.3
1.3
1.8
2.3
10
2.3
5.3
2.8 3.3
VIN (V)
3.8
4.3
4.8
5.3
Figure 15. Disable Time (ms) vs VIN (V), Over
Temperature Range
VBIAS and VIN Tied Together
100
1.8
4.8
−40°C
25°C
85°C
125°C
1k
1.3
4.3
100
Figure 14. Rise Time (ms) vs VIN (V), Over
Temperature Range (without Cgate)
1
0.8
3.8
1k
10
1.8
2.8 3.3
VIN (V)
10k
−40°C
25°C
85°C
125°C
1.3
2.3
Figure 13. Enable Time (ms) vs VIN (V) , Over
Temperature Range (without Cgate)
1.0
0.1
0.8
1.8
TF (ms)
TR (ms)
10
1.3
2.8 3.3
VIN (V)
3.8
4.3
4.8
Figure 16. Fall Time (ms) vs VIN (V), Over
Temperature Range
VBIAS and VIN Tied Together
Rload 25 W
http://onsemi.com
9
5.3
NCP458R, NCP459
FUNCTIONAL DESCRIPTION
Overview
If Vbias rail is not available or used, Vbias pin and Vin pin
can be connected together as close as possible the DUT. A
minimum of 1.2 V is necessary to control the IC.
The NCP458R and NCP459 are high side N channel
MOSFET power distribution switch designed to isolate ICs
connected on the battery or DCDC supplies in order to save
energy. The part can be used with a wide range of supply
from 0.75 V to 5.5 V.
Output rise time − Gate control
The NMOS is control with internal charge pump and
driver. A minimum gate slew rate is internally set to avoid
huge inrush current when EN is set from low to high. The
default gate slew rate depends on Vin level. The higher Vin
level, the longer rise time.
In addition, an external capacitor can be connected
between Gate pin and GND in order to slow down the gate
rising. See electrical table for more details.
Enable Input
Enable pin is an active high. The path is opened when EN
pin is tied low (disable), forcing NMOS switch off.
The IN/OUT path is activated with a minimum of VBIAS
min, Vin min and EN forced to high level.
Auto Discharge (Optional − NCP459)
NMOS FET is placed between the output pin and GND,
in order to discharge the application capacitor connected on
OUT pin.
The auto−discharge is activated when EN pin is set to low
level (disable state).
The discharge path ( Pull down NMOS) stays activated as
long as EN pin is set at low level.
In order to limit the current across the internal discharge
Nmosfet, the typical value is set at RDIS value.
Cin and Cout Capacitors
100 nF external capacitors must be connected as close as
possible the DUT for noise immunity and better stability. In
case of input hot plug (input voltage connected with fast
slew rate − few ms − it’s strongly recommended to avoid big
capacitor connected on the input. That allows to avoid input
over voltage transients.
Reverse Blocking Control (Optional NCP458R)
A reverse blocking control circuitry is embedded to
eliminate leakages from OUT to IN in case of Vout > Vin.
A comparator measures the dropout voltage on the switch
between OUT and IN and turn off the NMOS if this voltage
exceeds specified reverse voltage.
Vbias Rail
The core of the IC is supplied thanks to Vbias supply rail
(common +5 V, 3.3 V, 1.8 V, 1.2 V). Indeed, no current
consumption is used on IN pin, allowing to improve power
saving of the rail that must be isolated by the power switch.
http://onsemi.com
10
NCP458R, NCP459
APPLICATION INFORMATION
Power Dissipation
Demoboard
Main contributor in term of junction temperature is the
power dissipation of the power MOSFET. Assuming this,
the power dissipation and the junction temperature in
normal mode can be calculated with the following
equations:
The NCP458R and NCP459 integrate a 4 A rated NMOS
FET, and the PCB rules must be respected to properly
evacuate the heat out of the silicon.
The package is a CSP and due to the low thermal
resistance of the silicon, all the balls can be used to improved
power dissipation. Indeed, even if the power crosses the IN
/ OUT pins only, all the balls around this power area should
be connected to the larger PCB area.
In the below PCB example (application demonstration
board), all the PCB areas connected to 6 balls are enlarged.
In addition vias are connected to bottom side with exactly
same form factor of the other PCB side.
Additional improvements can be done also by using more
copper thickness and the thinner epoxy as possible.
P D + R DS(on)
PD
RDS(on)
IOUT
2
(eq. 1)
= Power dissipation (W)
= Power MOSFET on resistance (W)
= Output current (A)
TJ + PD
TJ
RqJA
TA
ǒIOUTǓ
R qJA ) T A
(eq. 2)
= Junction temperature (°C
= Package thermal resistance (°C/W)
= Ambient temperature (°C)
Figure 18. Demonstration Board
(bottom view)
Figure 17. Demonstration Board (top view)
http://onsemi.com
11
NCP458R, NCP459
C1
1μF
C3
1nF
IN
OUT
IN
OUT
Gate
EN
Vbias GND
1
GND
C2
1μF
D2
DIODE ZENER1
GND
NCP458−9
1
2
Bat
B2
C2
A1
D2
2
B1
C1
A2
D1
D1
DIODE ZENER1
J9
OUT_2
1
OUT
U1
2
IN
IN_2
VBIAS
100 k
1μF
R1
C4
EN
R2
100 k
Figure 19. Demonstration Board Schematic
BILL OF MATERIAL TABLE
Quantity
Reference schem
2
IN, OUT
4
IN_2, OUT_2, VBIAS, EN
1
J9 (Bat)
3
C1, C2, C4
1
C3
1
D1, D2
2
GND2,GND
2
R2, R3
1
U1
Part description
Socket, 4mm, metal, PK5
HEADER200
HEADER200-2
1uF
1nF, Not mounted
TVS
GND JUMPER
Resistor 100k 0603
Load switch
Part number
B010
2.54 mm, 77313-101-06LF
2.54 mm, 77313-101-06LF
GRM155R70J105KA12#
GRM188R60J102ME47#
ESD9x
D3082F05
MC 0.063 0603 1% 100K
NCP458 - 459
Manufacturer
HIRSCHMANN
FC
FC
Murata
Murata
ON Semiconductor
Harvin
MULTICOMP
ON Semiconductor
ORDERING INFORMATION
Device
Options
Marking
Package
Shipping†
NCP458RFCT2G
Reverse Voltage Protection
458RdYWW
WLCSP 1 x 2 mm
(Pb−Free)
3000 Tape / Reel
NCP458RFCCT2G
Reverse Voltage Protection,
Die Coating
458RCdYWW
WLCSP 1 x 2 mm
(Pb−Free)
3000 Tape / Reel
NCP459FCT2G
Discharge Path
459dYWW
WLCSP 1 x 2 mm
(Pb−Free)
3000 Tape / Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
12
NCP458R, NCP459
PACKAGE DIMENSIONS
WLCSP8, 2.0x1.0
CASE 567HD
ISSUE O
D
PIN A1
REFERENCE
0.25 C
2X
ÈÈ
0.25 C
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO THE SPHERICAL
CROWNS OF THE SOLDER BALLS.
A B
E
DIM
A
A1
A2
b
D
E
e
TOP VIEW
A
A2
0.10 C
MILLIMETERS
MIN
MAX
0.66
−−−
0.21
0.27
0.36 REF
0.29
0.34
2.00 BSC
1.00 BSC
0.50 BSC
A1
RECOMMENDED
SOLDERING FOOTPRINT*
0.05 C
NOTE 3
C
SIDE VIEW
e/2
8X
e
b
0.05 C A B
SEATING
PLANE
PACKAGE
OUTLINE
0.50
PITCH
e/2
e
A1
0.50
PITCH
1
0.03 C
2
A
B
C
8X
0.25
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
D
BOTTOM VIEW
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
13
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCP458R/D
工商网监
湘ICP备2023018690号
