NCV7718GEVB

Test Procedure for NCV7718EVB and NCV7720EVB Evaluation Board Oscilloscope 1 v/div CH1 CH2 CH3 s/div 12V CH4 1kW Oscilloscope 2 v/div DMM 3.3V CH1 DC V CH2 CH3 20 V Figure 1 Test Setup CH4 s/div As shown in the test setup, the jumper VCC_DIS and VBAT_DIS should be populated. Equipment: The required equipment to test the NCV7718 and the NCV7720 evaluation board is listed hereunder: Equipment Oscilloscope DC Power Supply Resistive Load LEDs PC with FlexMOS GUI installed USB to SPI interface Adapter USB Type A to Type B cable 24 Pin Ribbon Cable Quantity 2 1 6 for NCV7718, 10 for NCV7720 6 for NCV7718, 10 for NCV7720 1 1 Basic Specifications Quad Channel Oscilloscope 6V - 40V, 2A 1 kΩ