0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
NLAS4501

NLAS4501

  • 厂商:

    ONSEMI(安森美)

  • 封装:

  • 描述:

    NLAS4501 - Single SPST Analog Switch - ON Semiconductor

  • 数据手册
  • 价格&库存
NLAS4501 数据手册
NLAS4501 Single SPST Analog Switch The NLAS4501 is an analog switch manufactured in sub−micron silicon−gate CMOS technology. It achieves very low RON while maintaining extremely low power dissipation. The device is a bilateral switch suitable for switching either analog or digital signals, which may vary from zero to full supply voltage. The NLAS4501 is pin−for−pin compatible with the MAX4501. The NLAS4501 can be used as a direct replacement for the MAX4501 in all 2.0 V to 5.5 V applications where a RON performance improvement is required. The Enable pin is compatible with standard CMOS outputs when supply voltage is nominal 5.0 Volts. It is also over−voltage tolerant, making it a very useful logic level translator. http://onsemi.com MARKING DIAGRAMS A2d SC70−5/SC−88A/SOT−353 DF SUFFIX CASE 419A • Guaranteed RON of 32 W at 5.5 V • Low Power Dissipation: ICC = 2 mA • Provides Voltage translation for many different voltage levels • • Chip Complexity: FETs 11 • Pb−Free Packages are Available 3.3 to 5.0 V, Enable pin may go as high as +5.5 Volts 1.8 to 3.3 V 1.8 to 2.5 V Improved version of MAX4501 (at any voltage between 2 and 5.5 Volts) 5 1 SOT23−5/TSOP−5/SC59−5 DT SUFFIX CASE 483 d = Date Code 5 A2d 1 COM 1 5 VCC 1 2 3 4 PIN ASSIGNMENT COM NO GND ENABLE VCC NO 2 GND 3 4 ENABLE 5 FUNCTION TABLE Figure 1. Pinout (Top View) On/Off Enable Input L H State of Analog Switch Off On ORDERING INFORMATION See detailed ordering and shipping information on page 7 of this data sheet.  Semiconductor Components Industries, LLC, 2004 November, 2004 − Rev. 4 1 Publication Order Number: NLAS4501/D NLAS4501 MAXIMUM RATINGS Symbol VCC VIN VIS IIK TSTG TL TJ qJA PD MSL FR VESD Positive DC Supply Voltage Digital Input Voltage (Enable) Analog Output Voltage (VNO or VCOM) DC Current, Into or Out of Any Pin Storage Temperature Range Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature under Bias Thermal Resistance Power Dissipation in Still Air at 85°C Moisture Sensitivity Flammability Rating ESD Withstand Voltage Oxygen Index: 30% − 35% Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Above VCC and Below GND at 85°C (Note 5) SC70−5/SC−88A (Note 1) TSOP−5 SC70−5/SC−88A TSOP−5 Parameter Value *0.5 to )7.0 *0.5 to )7.0 *0.5 to VCC $20 *65 to )150 260 )150 350 230 150 200 Level 1 UL−94−VO (0.125 in) > 2000 > 100 N/A $300 V )0.5 Unit V V V mA °C °C °C °C/W mW ILatch−Up Latch−Up Performance mA Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow. 2. Tested to EIA/JESD22−A114−A. 3. Tested to EIA/JESD22−A115−A. 4. Tested to JESD22−C101−A. 5. Tested to EIA/JESD78. RECOMMENDED OPERATING CONDITIONS Symbol VCC VIN VIO VIS TA tr, tf Positive DC Supply Voltage Digital Input Voltage (Enable) Static or Dynamic Voltage Across an Off Switch Analog Input Voltage (NO, COM) Operating Temperature Range, All Package Types Input Rise or Fall Time, (Enable Input) NORMALIZED FAILURE RATE Vcc = 3.3 V + 0.3 V Vcc = 5.0 V + 0.5 V Characteristics Min 2.0 GND GND GND −55 0 0 Max 5.5 5.5 VCC VCC +125 100 20 Unit V V V V °C ns/V DEVICE JUNCTION TEMPERATURE VERSUS TIME TO 0.1% BOND FAILURES Junction Temperature 5C 80 90 100 110 120 130 140 Time, Hours 1,032,200 419,300 178,700 79,600 37,000 17,800 8,900 Time, Years 117.8 47.9 20.4 9.4 4.2 2.0 1.0 FAILURE RATE OF PLASTIC = CERAMIC UNTIL INTERMETALLICS OCCUR TJ = 130°C TJ = 120°C TJ = 100°C TJ = 110°C TJ = 90°C TJ = 80°C 100 TIME, YEARS 1 1 10 1000 Figure 2. Failure Rate vs. Time Junction Temperature http://onsemi.com 2 NLAS4501 DC CHARACTERISTICS − Digital Section (Voltages Referenced to GND) Guaranteed Max Limit Symbol VIH Parameter Minimum High−Level Input Voltage, Enable Inputs Condition VCC 2.0 3.0 4.5 5.5 2.0 3.0 4.5 5.5 VIN = 5.5 V or GND Enable and VIS = VCC or GND 0 V to 5.5 V 5.5 −55 to 255C 1.5 2.1 3.15 3.85 0.5 0.9 1.35 1.65 +0.1 1.0
NLAS4501 价格&库存

很抱歉,暂时无法提供与“NLAS4501”相匹配的价格&库存,您可以联系我们找货

免费人工找货