NLSV4T244DR2G

NLSV4T244 Non-Inverting Level Translator, Dual-Supply, 4-Bit The NLSV4T244 is a 4−bit configurable dual−supply voltage level translator. The input An and output Bn ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both supply rails are configurable from 0.9 V to 4.5 V allowing universal low−voltage translation from the input An to the output Bn port. www.onsemi.com MARKING DIAGRAMS UQFN12 MU SUFFIX CASE 523AE Features • • • • • • • • • • Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V High−Speed w/ Balanced Propagation Delay Inputs and Outputs have OVT Protection to 4.5 V Non−preferential VCCA and VCCB Sequencing Outputs at 3−State until Active VCC is Reached Power−Off Protection Outputs Switch to 3−State with VCCB at GND Ultra−Small Packaging: 1.7 mm x 2.0 mm UQFN12 NLVSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable These are Pb−Free Devices 1 URMG G UR = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) 14 SOIC−14 D SUFFIX CASE 751A 14 1 SV4T244G AWLYWW 1 14 14 1 TSSOP−14 DT SUFFIX CASE 948G Typical Applications 1 • Mobile Phones, PDAs, Other Portable Devices A L, WL Y, YY W, WW G or G Important Information • ESD Protection for All Pins: HBM (Human Body Model) > 1500 V SV4T 244 ALYWG G = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2015 May, 2018 − Rev. 7 1 Publication Order Number: NLSV4T244/D NLSV4T244 OE VCCA 1 A1 11 VCCB 2 10 B1 A2 3 9 B2 A3 4 8 B3 A4 5 7 B4 12 6 GND (Top View) OE VCCB B1 B2 B3 NC B4 14 13 12 11 10 9 8 1 2 3 4 5 6 7 VCCA A1 A2 A3 A4 NC GND Figure 1. Pin Assignments VCCA VCCB A1 B1 A2 B2 A3 B3 A4 B4 OE Figure 2. Logic Diagram TRUTH TABLE PIN ASSIGNMENT PIN FUNCTION VCCA Input Port DC Power Supply VCCB Inputs Outputs OE An Bn Output Port DC Power Supply L L L GND Ground L H H An Input Port H X 3−State Bn Output Port OE Output Enable ORDERING INFORMATION Package Shipping † UQFN12 (Pb−Free) 3000 / Tape and Reel NLSV4T244DR2G SOIC−14 (Pb−Free) 2500 / Tape and Reel NLSV4T244DTR2G TSSOP−14 (Pb−Free) 2500 / Tape and Reel Device NLSV4T244MUTAG NLVSV4T244MUTAG* †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D *NLVSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable. www.onsemi.com 2 NLSV4T244 MAXIMUM RATINGS Symbol VCCA, VCCB VI VC VO Rating Value DC Supply Voltage Condition Unit −0.5 to +5.5 V An −0.5 to +5.5 V OE −0.5 to +5.5 V (Power Down) Bn −0.5 to +5.5 (Active Mode) Bn −0.5 to +5.5 V (Tri−State Mode) Bn −0.5 to +5.5 V DC Input Voltage Control Input DC Output Voltage VCCA = VCCB = 0 V IIK DC Input Diode Current −20 VI < GND mA IOK DC Output Diode Current −50 VO < GND mA IO DC Output Source/Sink Current ±50 mA ICCA, ICCB DC Supply Current Per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RECOMMENDED OPERATING CONDITIONS Symbol VCCA, VCCB VI Parameter Positive DC Supply Voltage Bus Input Voltage VC Control Input VIO Bus Output Voltage TA Dt / DV Min Max Unit 0.9 4.5 V GND 4.5 V OE GND 4.5 V (Power Down Mode) Bn GND 4.5 V (Active Mode) Bn GND VCCB V (Tri−State Mode) Bn GND 4.5 V −40 +105 °C 0 10 nS Operating Temperature Range Input Transition Rise or Rate VI, from 30% to 70% of VCC; VCC = 3.3 V ±0.3 V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. www.onsemi.com 3 NLSV4T244 DC ELECTRICAL CHARACTERISTICS −405C to +855C Symbol VIH VIL VOH Parameter Test Conditions Input HIGH Voltage (An, OE) Input LOW Voltage (An, OE) Output HIGH Voltage VCCA (V) VCCB (V) Min Max Unit 3.6 – 4.5 0.9 – 4.5 V 2.2 − 2.7 – 3.6 2.0 − 2.3 – 2.7 1.6 − 1.4 − 2.3 0.65 * VCCA − 0.9 – 1.4 0.9 * VCCA − 3.6 – 4.5 − 0.8 − 0.8 2.3 – 2.7 − 0.7 1.4 − 2.3 − 0.35 * VCCA 0.9 – 1.4 − 0.1 * VCCA IOH = −100 mA; VI = VIH 0.9 – 4.5 0.9 – 4.5 VCCB – 0.2 − IOH = −0.5 mA; VI = VIH 0.9 0.9 0.75 * VCCB − IOH = −2 mA; VI = VIH 1.4 1.4 1.05 − IOH = −6 mA; VI = VIH 1.65 1.65 1.25 − 2.3 2.3 2.0 − 2.3 2.3 1.8 − 2.7 2.7 2.2 − 2.3 2.3 1.7 − IOH = −12 mA; VI = VIH IOH = −18 mA; VI = VIH VOL Output LOW Voltage 0.9 – 4.5 2.7 – 3.6 3.0 3.0 2.4 − IOH = −24 mA; VI = VIH 3.0 3.0 2.2 − IOL = 100 mA; VI = VIL 0.9 – 4.5 0.9 – 4.5 − 0.2 IOL = 0.5 mA; VI = VIL 1.1 1.1 − 0.3 IOL = 2 mA; VI = VIL 1.4 1.4 − 0.35 IOL = 6 mA; VI = VIL 1.65 1.65 − 0.3 IOL = 12 mA; VI = VIL 2.3 2.3 − 0.4 2.7 2.7 − 0.4 2.3 2.3 − 0.6 3.0 3.0 − 0.45 IOL = 18 mA; VI = VIL IOL = 24 mA; VI = VIL V V V 3.0 3.0 − 0.6 Input Leakage Current VI = VCCA or GND 0.9 – 4.5 0.9 – 4.5 −1.0 1.0 mA IOFF Power−Off Leakage Current OE = 0 V 0 0.9 – 4.5 0.9 – 4.5 0 −1.0 −1.0 1.0 1.0 mA ICCA Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 2.0 mA ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 2.0 mA ICCA + ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 – 4.5 − 4.0 mA II DICCA Increase in ICC per Input Voltage, VI = VCCA – 0.6 V; Other Inputs at VCCA or GND VI = VCCA or GND 4.5 3.6 4.5 3.6 − 10 5.0 mA DICCB Increase in ICC per Input Voltage, VI = VCCA – 0.6 V; Other Inputs at VCCA or GND VI = VCCA or GND 4.5 3.6 4.5 3.6 − 10 5.0 mA 0.9 – 4.5 0.9 – 4.5 −1.0 1.0 mA IOZ I/O Tri−State Output Leakage Current TA = 25°C, OE = VCCA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 4 NLSV4T244 TOTAL STATIC POWER CONSUMPTION (ICCA + ICCB) −405C to +855C VCCB (V) 4.5 VCCA (V) Min 3.3 Max Min 2.8 Max Min 1.8 Max Min 0.9 Max Min Max Unit 4.5 2 2 2 2 < 1.5 μA 3.3 2 2 2 2 < 1.5 μA 2.8