NRVS2J

General-Purpose Rectifiers (Glass Passivated) S2A-S2M Description The S2 family of devices are general−purpose 2 A rated rectifiers with voltage ratings ranging from 50 to 1000 V. They are implemented in traditional SMB packages and are well known to the industry. For advanced or special requirements, please contact an ON Semiconductor representative. www.onsemi.com Features • • • • • • • • High−Current Capability, 2 A Rated Fast Response: 2 ms Trr Low−Forward Voltage Drop, 1.15 V VF Max at 2 A High−Surge Current Capability, 50 A2s IFSM Glass Passivated Junction UL Certified, UL #E258596 NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant SMB CASE 403AF MARKING DIAGRAM $Y&Z&3 S2X Applications • Power Supplies • AC to DC Rectification • Bypass Diodes ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) $Y &Z &3 S2X = ON Semiconductor Logo = Assembly Plant Code = Numeric Date Code = Specific Device Code X = A−M Value Symbol Parameter S2A S2B S2D S2G S2J S2K S2M Unit 50 100 200 400 600 800 1000 V VRRM Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current at TA = 100°C 2.0 A IFSM Non−Repetitive Peak Forward Surge Current 8.3 ms Single Half−Sine Wave 50 A TSTG Storage Temperature Range −65 to +150 °C TJ Operating Junction Temperature Range −65 to +150 °C ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. © Semiconductor Components Industries, LLC, 2001 April, 2020 − Rev. 2 1 Publication Order Number: S2M/D S2A−S2M THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Parameter Symbol PD Power Dissipation RqJA Thermal Resistance, Junction to Ambient (Note 1) Value Unit 2.35 W 53 °C/W 1. Device is mounted on FR−4 PCB 0.013 mm. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Value Parameter Symbol VF Maximum Forward Voltage trr IR CT Conditions S2A S2B IF = 2.0 A S2D S2G S2J S2K S2M Unit 1.15 V Typical Reverse−Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 2.0 ms Maximum Reverse Current at Rated VR TA = 25_C 1.0 mA TA = 125_C 125 Typical Total Capacitance VR = 4.0 V, f = 1.0 MHz 30 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. ORDERING INFORMATION Part Number Marking Package Shipping† S2A, NRVS2A* S2A S2B SMB (Pb−Free) 3000 / Tape & Reel S2B, NRVS2B* S2D, NRVS2D* S2D S2G, NRVS2G* S2G S2J, NRVS2J* S2J S2K, NRVS2K* S2K S2M, NRVS2M* S2M †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. www.onsemi.com 2 S2A−S2M 2.0 50 Peak Forward Surge Current, IFSM [A] Average Rectified Forward Current, IF [A] TYPICAL PERFORMANCE CHARACTERISTICS 1.5 1.0 Resistive or Inductive Load P.C.B. Mounted 8.0 × 8.0 mm Copper Pad Areas 0.5 0 0 25 50 75 100 125 150 40 30 20 10 0 175 1 2 Ambient Temperature [5C] Figure 1. Forward Current Derating Curve 20 50 100 10 Reverse Current, IR [mA] Forward Current, IF [A] 10 Figure 2. Non−Repetitive Surge Current 10 1 0.1 TA = 25°C Pulse Width = 300 ms 2% Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 TA = 125°C 1 TA = 25°C 0.01 1.6 50 20 10 5 2 0.5 1 2 5 10 20 20 40 60 80 100 120 140 Figure 4. Reverse Current vs. Reverse Voltage 100 0.2 0 Percent of Rated Peak Reverse Voltage [%] Figure 3. Forward Voltage Characteristics 1 0.1 TA = 100°C 0.1 Forward Voltage, VF [V] Total Capacitance, CT [pF] 5 Number of Cycles at 60 Hz 50 100 Reverse Voltage, VR [V] Figure 5. Total Capacitance www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SMB CASE 403AF ISSUE O B 5.60 5.08 B M 0.13 DATE 31 AUG 2016 CBA 2.50 3.95 3.30 2.20 1.91 B B A 2.20 4.70 4.75 4.05 LAND PATTERN RECOMMENDATION 8° 0° 2.65 MAX A R0.15 4X 2.45 1.90 GAUGE PLANE 0.45 B C 0.30 0.05 0.203 0.050 2.15 1.65 0.13 M CBA 0.41 0.15 0 − 8° 1.60 0.75 DETAIL A SCALE 20 : 1 NOTES: A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AA. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5−1994. F. LAND PATTERN STD. DIOM5336X240M. DOCUMENT NUMBER: DESCRIPTION: 98AON13441G SMB Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales