NTD6415ANL, NVD6415ANL
MOSFET – Power,
N-Channel, Logic Level
100 V, 23 A, 56 mW
Features
• Low RDS(on)
• 100% Avalanche Tested
• NVD Prefix for Automotive and Other Applications Requiring
•
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
www.onsemi.com
V(BR)DSS
RDS(on) MAX
56 mW @ 4.5 V
100 V
52 mW @ 10 V
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Parameter
Value
Unit
Drain−to−Source Voltage
VDSS
100
V
Gate−to−Source Voltage − Continuous
VGS
$20
V
ID
23
A
Steady
State
Power Dissipation
Steady
State
Pulsed Drain Current
TC = 25°C
TC = 100°C
TC = 25°C
tp = 10 ms
Operating and Storage Temperature Range
Source Current (Body Diode)
Single Pulse Drain−to−Source Avalanche
Energy (VDD = 50 Vdc, VGS = 10 Vdc, IL(pk) =
23 A, L = 0.3 mH, RG = 25 W)
Lead Temperature for Soldering
Purposes, 1/8″ from Case for 10 Seconds
G
16
S
PD
83
W
IDM
80
A
TJ, Tstg
−55 to
+175
°C
IS
23
A
EAS
79
mJ
TL
260
°C
4
1 2
3
DPAK
CASE 369AA
STYLE 2
MARKING DIAGRAM
& PIN ASSIGNMENT
4 Drain
Symbol
Max
Unit
Junction−to−Case (Drain) − Steady State
RqJC
1.8
°C/W
Junction−to−Ambient − Steady State (Note 1)
RqJA
39
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Surface mounted on FR4 board using 1 sq in pad size,
(Cu Area 1.127 sq in [2 oz] including traces).
AYWW
64
15ANLG
THERMAL RESISTANCE RATINGS
Parameter
23 A
D
Symbol
Continuous Drain
Current
ID MAX
1
Gate
A
6415ANL
Y
WW
G
2
Drain
3
Source
= Assembly Location*
= Device Code
= Year
= Work Week
= Pb−Free Package
* The Assembly Location code (A) is front side
optional. In cases where the Assembly Location is
stamped in the package, the front side assembly
code may be blank.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2016
May, 2019− Rev. 5
1
Publication Order Number:
NTD6415ANL/D
NTD6415ANL, NVD6415ANL
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
VGS = 0 V, ID = 250 mA, TJ = −40°C
100
92
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/TJ
Parameter
Typ
Max
Unit
OFF CHARACTERISTICS
V
115
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
IGSS
VDS = 0 V, VGS = "20 V
VGS(TH)
VGS = VDS, ID = 250 mA
VGS = 0 V,
VDS = 100 V
TJ = 25°C
mV/°C
1.0
TJ = 125°C
mA
100
"100
nA
2.0
V
ON CHARACTERISTICS (Note 2)
Gate Threshold Voltage
1.0
Negative Threshold Temperature
Coefficient
VGS(TH)/TJ
Drain−to−Source On−Resistance
RDS(on)
VGS = 4.5 V, ID = 10 A
44
56
VGS = 10 V, ID = 10 A
43
52
gFS
VDS = 5.0 V, ID = 10 A
24
S
1024
pF
Forward Transconductance
4.8
mV/°C
mW
CHARGES, CAPACITANCES AND GATE RESISTANCE
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
70
Total Gate Charge
QG(TOT)
20
Threshold Gate Charge
QG(TH)
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
Total Gate Charge
VGS = 0 V, f = 1.0 MHz, VDS = 25 V
VGS = 4.5 V, VDS = 80 V, ID = 23 A
QGD
QG(TOT)
156
nC
1.1
3.1
14
VGS = 10 V, VDS = 80 V, ID = 23 A
35
nC
11
ns
SWITCHING CHARACTERISTICS (Note 3)
Turn−On Delay Time
Rise Time
td(on)
tr
Turn−Off Delay Time
Fall Time
td(off)
VGS = 4.5 V, VDD = 80 V,
ID = 23 A, RG = 6.1 W
tf
91
40
71
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
VSD
VGS = 0 V, IS = 23 A
TJ = 25°C
0.87
TJ = 125°C
0.74
Reverse Recovery Time
tRR
64
Charge Time
Ta
40
Discharge Time
Tb
Reverse Recovery Charge
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 23 A
QRR
1.2
V
ns
24
152
nC
2. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%.
3. Switching characteristics are independent of operating junction temperatures.
ORDERING INFORMATION
Device
Package
Shipping†
DPAK
(Pb−Free)
2500 / Tape & Reel
NTD6415ANLT4G
NVD6415ANLT4G
NVD6415ANLT4G−VF01
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
www.onsemi.com
2
NTD6415ANL, NVD6415ANL
TYPICAL CHARACTERISTICS
45
3.6 V
4V
5V
35
30
3.4 V
25
3.2 V
20
15
3.0 V
10
2.8 V
35
30
25
20
10
5
0
0
1
2
3
4
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
5
TJ = 25°C
15
5
0
VDS w 10 V
40
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
40
45
TJ = 25°C
VGS = 10 V
TJ = 125°C
TJ = −55°C
1
Figure 2. Transfer Characteristics
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
Figure 1. On−Region Characteristics
0.050
0.050
ID = 23 A
TJ = 25°C
0.048
TJ = 25°C
0.048
0.046
0.046
0.044
VGS = 4.5 V
0.044
0.042
0.040
VGS = 10 V
0.042
2
3
4
5
6
7
8
9
10
0.040
5
VGS, GATE−TO−SOURCE VOLTAGE (V)
20
25
10000
VGS = 0 V
IDSS, LEAKAGE (nA)
ID = 23 A
VGS = 4.5 V
2.0
1.5
1.0
0.5
−50
15
Figure 4. On−Resistance versus Drain
Current and Gate Voltage
3.0
2.5
10
ID, DRAIN CURRENT (A)
Figure 3. On−Region versus Gate Voltage
RDS(on), DRAIN−TO−SOURCE RESISTANCE
(NORMALIZED)
4
2
3
VGS, GATE−TO−SOURCE VOLTAGE (V)
−25
0
25
50
75
100
125
150
175
TJ = 150°C
1000
TJ = 125°C
100
10
20
30
40
50
60
70
80
90 100
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
versus Voltage
www.onsemi.com
3
NTD6415ANL, NVD6415ANL
C, CAPACITANCE (pF)
2500
TJ = 25°C
VGS = 0 V
2000
1500
Ciss
1000
500
0
Crss
0
10
Coss
20
30
40
50
60
70
80
90
VGS, GATE−TO−SOURCE VOLTAGE (V)
TYPICAL CHARACTERISTICS
100
6
Qds
4
Qgs
VDS = 80 V
ID = 23 A
TJ = 25°C
2
0
0
5
10
15
20
25
30
35
Qg, TOTAL GATE CHARGE (nC)
Figure 8. Gate−to−Source Voltage and
Drain−to−Source Voltage versus Total Charge
25
IS, SOURCE CURRENT (A)
tr
100
tf
10
td(off)
td(on)
1
100
10
100
TJ = 25°C
VGS = 0 V
20
15
10
5
0
0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
versus Gate Resistance
Figure 10. Diode Forward Voltage versus
Current
125
ID = 23 A
AVALANCHE ENERGY (mJ)
t, TIME (ns)
8
Figure 7. Capacitance Variation
VDS = 80 V
ID = 23 A
VGS = 4.5 V
ID, DRAIN CURRENT (A)
QT
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1000
1
10
10 ms
10
100 ms
VGS = 10 V
SINGLE PULSE
TC = 25°C
1
1 ms
10 ms
dc
RDS(on) LIMIT
THERMAL LIMIT
PACKAGE LIMIT
0.1
1
10
100
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1000
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
100
75
50
25
0
25
50
75
100
125
150
TJ, STARTING JUNCTION TEMPERATURE
175
Figure 12. Maximum Avalanche Energy versus
Starting Junction Temperature
www.onsemi.com
4
NTD6415ANL, NVD6415ANL
RqJC(t) (°C/W) EFFECTIVE TRANSIENT
THERMAL RESISTANCE
TYPICAL CHARACTERISTICS
10
1
Duty Cycle = 0.5
0.2
0.1
0.05
0.1
0.02
0.01
0.01
SINGLE PULSE
0.001
0.000001
0.00001
0.0001
0.001
0.01
t, PULSE TIME (s)
Figure 13. Thermal Response
www.onsemi.com
5
0.1
1
10
NTD6415ANL, NVD6415ANL
PACKAGE DIMENSIONS
DPAK (SINGLE GUAGE)
CASE 369AA
ISSUE B
A
E
b3
c2
B
Z
D
1
L4
A
4
L3
b2
e
2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
C
H
DETAIL A
3
c
b
0.005 (0.13)
M
H
C
L2
GAUGE
PLANE
C
L
SEATING
PLANE
A1
L1
DETAIL A
ROTATED 905 CW
2.58
0.102
5.80
0.228
3.00
0.118
1.60
0.063
INCHES
MIN
MAX
0.086 0.094
0.000 0.005
0.025 0.035
0.030 0.045
0.180 0.215
0.018 0.024
0.018 0.024
0.235 0.245
0.250 0.265
0.090 BSC
0.370 0.410
0.055 0.070
0.108 REF
0.020 BSC
0.035 0.050
−−− 0.040
0.155
−−−
MILLIMETERS
MIN
MAX
2.18
2.38
0.00
0.13
0.63
0.89
0.76
1.14
4.57
5.46
0.46
0.61
0.46
0.61
5.97
6.22
6.35
6.73
2.29 BSC
9.40 10.41
1.40
1.78
2.74 REF
0.51 BSC
0.89
1.27
−−−
1.01
3.93
−−−
STYLE 2:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
SOLDERING FOOTPRINT*
6.20
0.244
DIM
A
A1
b
b2
b3
c
c2
D
E
e
H
L
L1
L2
L3
L4
Z
6.17
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTD6415ANL/D