Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
RFD16N06LESM
October 2013
Data Sheet
N-Channel Logic Level Power MOSFET
60 V, 16 A, 47 mΩ
Features
• 16A, 60V
These are N-Channel power MOSFETs manufactured
using a modern process. This process, which uses feature
sizes approaching those of LSI integrated circuits gives
optimum utilization of silicon, resulting in outstanding
performance. They were designed for use in applications
such as switching regulators, switching converters, motor
drivers, relay drivers and emitter switches for bipolar
transistors. This performance is accomplished through a
special gate oxide design which provides full rated
conductance at gate bias in the 3V to 5V range, thereby
facilitating true on-off power control directly from logic level
(5V) integrated circuits.
• rDS(ON) = 0.047Ω
• Temperature Compensating PSPICE® Model
• Can be Driven Directly from CMOS, NMOS, TTL
Circuits
• Peak Current vs Pulse Width Curve
• UIS Rating Curve
• Related Literature
- TB334 “Guidelines for Soldering Surface Mount
Components to PC Boards”
Formerly developmental type TA49027.
Ordering Information
PART NUMBER
RFD16N06LESM9A
PACKAGE
TO-252AA
Symbol
BRAND
D
16N06LE
G
S
Packaging
JEDEC TO-252AA
DRAIN (FLANGE)
GATE
SOURCE
©2002 Fairchild Semiconductor Corporation
RFD16N06LESM Rev. C0
RFD16N06LESM
Absolute Maximum Ratings
TC = 25oC, Unless Otherwise Specified
Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS
Drain to Gate Voltage (RGS = 20kΩ) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR
Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS
Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID
Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM
Pulsed Avalanche Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD
Derate Above 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG
Maximum Temperature for Soldering
Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . TL
Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tpkg
RFD16N06LESM
60
60
+10, -8
16
Refer to Peak Current Curve
Refer to UIS Curve
90
0.606
-55 to 175
UNITS
V
V
V
A
300
260
oC
oC
W
W/oC
oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. TJ = 25oC to 150oC.
Electrical Specifications
TC = 25oC, Unless Otherwise Specified
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNITS
V
Drain to Source Breakdown Voltage
BVDSS
ID = 250µA, VGS = 0V, Figure 11
60
-
-
Gate Threshold Voltage
VGS(TH)
VGS = VDS, ID = 250µA, Figure 10
1
-
3
V
VDS = 55V, VGS = 0V
-
-
1
µA
VDS = 50V, VGS = 0V, TC = 150oC
-
-
250
µA
VGS = +10, -8V
-
-
10
µA
ID = 16A, VGS = 5V
-
-
0.047
Ω
VDD = 30V, ID = 16A, RL = 1.88Ω,
VGS = 5V, RGS = 5Ω
Figures 16, 17
-
-
100
ns
-
11
-
ns
tr
-
60
-
ns
td(OFF)
-
48
-
ns
tf
-
35
-
ns
tOFF
-
-
115
ns
-
51
62
nC
-
29
35
nC
Zero Gate Voltage Drain Current
IDSS
Gate to Source Leakage Current
IGSS
Drain to Source On Resistance (Note 2)
rDS(ON)
Turn-On Time
tON
Turn-On Delay Time
td(ON)
Rise Time
Turn-Off Delay Time
Fall Time
Turn-Off Time
Total Gate Charge
Qg(TOT)
VGS = 0V to 10V
Gate Charge at 5V
Qg(5)
VGS = 0V to 5V
Qg(TH)
VGS = 0V to 1V
-
1.8
2.6
nC
VDS = 25V, VGS = 0V,
f = 1MHz
Figure 12
-
1350
-
pF
-
300
-
pF
Threshold Gate Charge
VDD = 48V,
ID = 16A, RL = 3Ω
Figures 18, 19
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
-
90
-
pF
Thermal Resistance Junction to Case
RθJC
-
-
1.65
oC/W
Thermal Resistance Junction to Ambient
RθJA
-
-
80
oC/W
TYP
MAX
UNITS
TO-252AA
Source to Drain Diode Specifications
PARAMETER
Source to Drain Diode Voltage (Note 2)
Diode Reverse Recovery Time
SYMBOL
VSD
trr
TEST CONDITIONS
MIN
ISD = 16A
-
-
1.5
V
ISD = 16A, dISD/dt = 100A/µs
-
-
125
ns
NOTES:
2. Pulse Test: Pulse Width ≤300µs, Duty Cycle ≤2%.
3. Repetitive Rating: Pulse Width limited by max junction temperature.
©2002 Fairchild Semiconductor Corporation
RFD16N06LESM Rev. C0
RFD16N06LESM
Typical Performance Curves
Unless Otherwise Specified
POWER DISSIPATION MULTIPLIER
1.2
20
ID , DRAIN CURRENT (A)
1.0
0.8
0.6
0.4
15
10
5
0.2
0
25
0
0
25
125
50
75
100
TC , CASE TEMPERATURE (oC)
175
150
1ms
10ms
VDSS MAX = 60V
1
10
VDS , DRAIN TO SOURCE VOLTAGE (V)
IDM , PEAK CURRENT CAPABILITY (A)
ID, DRAIN CURRENT (A)
10
1
150
175
VGS = 10V
I = I25
(
175 - TC
150
)
100
VGS = 5V
TRANSCONDUCTANCE
MAY LIMIT CURRENT
IN THIS REGION
10
10-6
100
FOR TEMPERATURES
ABOVE 25oC DERATE PEAK
CURRENT AS FOLLOWS:
TC = 25oC
FIGURE 3. FORWARD BIAS SAFE OPERATING AREA
10-4
10-2
10-3
t, PULSE WIDTH (s)
10-5
10-1
100
101
FIGURE 4. PEAK CURRENT CAPABILITY
100
100
VGS = 10V
TC =25oC
STARTING TJ = 25oC
STARTING TJ = 150oC
ID , DRAIN CURRENT (A)
IAS , AVALANCHE CURRENT (A)
125
500
100µs
OPERATION IN THIS
AREA MAY BE
LIMITED BY rDS(ON)
100
FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs
CASE TEMPERATURE
TC = 25oC
TJ = MAX RATED
100
75
TC , CASE TEMPERATURE (oC)
FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE
TEMPERATURE
200
50
10
If R = 0
tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD)
If R ≠ 0
tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1]
VGS = 5V
80
VGS = 4.5V
60
VGS = 4V
40
VGS = 3V
20
PULSE DURATION = 80µs
DUTY CYCLE = 0.5% MAX.
0
1
0.01
0.1
1
tAV, TIME IN AVALANCHE (ms)
FIGURE 5. UNCLAMPED INDUCTIVE SWITCHING
©2002 Fairchild Semiconductor Corporation
10
0
1.5
3.0
4.5
6.0
7.5
VDS , DRAIN TO SOURCE VOLTAGE (V)
FIGURE 6. SATURATION CHARACTERISTICS
RFD16N06LESM Rev. C0
RFD16N06LESM
Typical Performance Curves
2.5
VDD = 15V
NORMALIZED DRAIN TO SOURCE
ON RESISTANCE
PULSE DURATION = 80µs
DUTY CYCLE = 0.5% MAX
80
175oC
25oC
-55oC
60
40
20
0
0
1.5
3.0
4.5
6.0
2.0
PULSE DURATION = 80µs
DUTY CYCLE = 0.5% MAX.
VGS = 5V, ID = 16A
1.5
1.0
0.5
0
-80
7.5
-40
FIGURE 7. TRANSFER CHARACTERISTICS
2.0
VGS = VDS, ID = 250µA
1.5
1.0
0.5
0
-80
-40
160
120
0
40
80
TJ , JUNCTION TEMPERATURE (oC)
VGS = 0V, f = 1MHz
CISS = CGS + CGD
CRSS = CGD
COSS ≈ CDS + CGD
COSS
CRSS
0
0
5
10
15
20
160
200
ID = 250µA
1.0
0.5
0
-80
-40
0
40
80
120
160
200
FIGURE 10. NORMALIZED DRAIN TO SOURCE BREAKDOWN
VOLTAGE vs JUNCTION TEMPERATURE
VDS , DRAIN TO SOURCE VOLTAGE (V)
C, CAPACITANCE (pF)
CISS
500
120
TJ , JUNCTION TEMPERATURE (oC)
2000
1000
80
1.5
200
FIGURE 9. NORMALIZED GATE THRESHOLD VOLTAGE vs
TEMPERATURE
1500
40
FIGURE 8. NORMALIZED DRAIN TO SOURCE ON
RESISTANCE vs JUNCTION TEMPERATURE
NORMALIZED DRAIN TO SOURCE
BREAKDOWN VOLTAGE
NORMALIZED GATE
THRESHOLD VOLTAGE
2.0
0
TJ , JUNCTION TEMPERATURE (oC)
VGS , GATE TO SOURCE VOLTAGE (V)
25
VDS , DRAIN TO SOURCE VOLTAGE (V)
5.00
60
VDD = BVDSS
VDD = BVDSS
3.75
45
2.50
30
15
0.75 BVDSS 0.75 BVDSS
0.50 BVDSS 0.50 BVDSS
0.25 BVDSS 0.25 BVDSS
1.25
RL = 3.75Ω
IG(REF) = 0.65mA
VGS = 5V
VGS , GATE TO SOURCE VOLTAGE (V)
ID(ON) , ON STATE DRAIN CURRENT (A)
100
Unless Otherwise Specified (Continued)
0
0
I G ( REF )
20 ---------------------I G ( ACT )
t, TIME (µs)
I G ( REF )
80 ---------------------I G ( ACT )
NOTE: Refer to Fairchild Application Notes AN7254 and AN7260.
FIGURE 11. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE
©2002 Fairchild Semiconductor Corporation
FIGURE 12. NORMALIZED SWITCHING WAVEFORMS FOR
CONSTANT GATE CURRENT
RFD16N06LESM Rev. C0
RFD16N06LESM
Test Circuits and Waveforms
VDS
BVDSS
L
tP
VARY tP TO OBTAIN
REQUIRED PEAK IAS
RG
VDS
IAS
+
VDD
VDD
-
VGS
DUT
tP
0V
IAS
0
0.01Ω
tAV
FIGURE 13. UNCLAMPED ENERGY TEST CIRCUIT
FIGURE 14. UNCLAMPED ENERGY WAVEFORMS
tON
VDS
tOFF
td(ON)
RL
VGS
td(OFF)
tr
VDS
tf
90%
90%
+
-
DUT
VDD
10%
10%
RGS
90%
VGS
VGS
10%
FIGURE 15. SWITCHING TIME TEST CIRCUIT
VDS
50%
50%
PULSE WIDTH
FIGURE 16. RESISTIVE SWITCHING WAVEFORMS
VDD
RL
Qg(TOT)
VDS
Qg(10) OR Qg(5)
VGS
+
VDD
VGS
DUT
Ig(REF)
VGS = 2V
0
VGS = 1V FOR
L2 DEVICES
Qg(TH)
VGS = 20V
VGS = 10V FOR
L2 DEVICES
VGS = 10V
VGS = 5V FOR
L2 DEVICES
Ig(REF)
0
FIGURE 17. GATE CHARGE TEST CIRCUIT
©2002 Fairchild Semiconductor Corporation
FIGURE 18. GATE CHARGE WAVEFORMS
RFD16N06LESM Rev. C0
RFD16N06LESM
PSPICE Electrical Model
SUBCKT RFD16N06LESM 2 1 3 ;
rev 8/2/93
CA 12 8 1.46e-9
CB 15 14 1.46e-9
CIN 6 8 1.0e-9
DBODY 7 5 DBODYMOD
DBREAK 5 11 DBREAKMOD
DPLCAP 10 5 DPLCAPMOD
LDRAIN
DPLCAP
DRAIN
2
5
10
5
51
ESLC
11
-
RDRAIN
6
8
EVTHRES
+ 19 8
+
LGATE
GATE
1
MMED 16 6 8 8 MMEDMOD
MSTRO 16 6 8 8 MSTROMOD
MWEAK 16 21 8 8 MWEAKMOD
+
50
-
IT 8 17 1
EVTEMP
RGATE +
18 22
9
20
21
EBREAK
17
18
DBODY
-
16
MWEAK
6
MMED
MSTRO
RLGATE
LSOURCE
CIN
8
SOURCE
3
7
RSOURCE
RBREAK 17 18 RBREAKMOD 1
RDRAIN 50 16 RDRAINMOD 7.0e-3
RGATE 9 20 3.6
RLDRAIN 2 5 10
RLGATE 1 9 55
RLSOURCE 3 7 44
RSLC1 5 51 RSLCMOD 1e-6
RSLC2 5 50 1e3
RSOURCE 8 7 RSOURCEMOD 1.45e-2
RVTHRES 22 8 RVTHRESMOD 1
RVTEMP 18 19 RVTEMPMOD 1
S1A
S1B
S2A
S2B
DBREAK
+
RSLC2
ESG
LDRAIN 2 5 1e-9
LGATE 1 9 5.5e-9
LSOURCE 3 7 4.4e-9
RLDRAIN
RSLC1
51
EBREAK 11 7 17 18 66.0
EDS 14 8 5 8 1
EGS 13 8 6 8 1
ESG 6 10 6 8 1
EVTHRES 6 21 19 8 1
EVTEMP 20 6 18 22 1
RLSOURCE
S1A
12
S2A
14
13
13
8
S1B
CA
17
18
RVTEMP
S2B
13
CB
6
8
EGS
19
-
-
IT
14
+
+
6 12 13 8 S1AMOD
13 12 13 8 S1BMOD
6 15 14 13 S2AMOD
13 15 14 13 S2BMOD
RBREAK
15
VBAT
5
8
EDS
-
+
8
22
RVTHRES
VBAT 22 19 DC 1
ESLC 51 50 VALUE={(V(5,51)/ABS(V(5,51)))*(PWR(V(5,51)/(1e-6*100),3.5))}
.MODEL DBODYMOD D (IS = 6.3e-13 RS = 6.8e-3 TRS1 = 1e-3 TRS2 = 1e-6 XTI = 4.3 CJO = 1.28e-9 TT = 5.1e-8 M = 0.5)
.MODEL DBREAKMOD D (RS = 2.9e-1 TRS1 = 1e-4 TRS2 = 0)
.MODEL DPLCAPMOD D (CJO = 9.5e-10 IS = 1e-30 N = 10 M = 0.82)
.MODEL MMEDMOD NMOS (VTO = 2.10 KP = 6 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u RG = 3.6)
.MODEL MSTROMOD NMOS (VTO = 2.45 KP = 60.5 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u)
.MODEL MWEAKMOD NMOS (VTO = 1.79 KP = 0.13 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u RG = 36 RS = 0.1)
.MODEL RBREAKMOD RES (TC1 = 1.2e-3 TC2 = -5e-7)
.MODEL RDRAINMOD RES (TC1 = 1.3e-2 TC2 = 3.1e-5)
.MODEL RSLCMOD RES (TC1 = 5.5e-3 TC2 = 7e-6)
.MODEL RSOURCEMOD RES (TC1 = 1e-3 TC2 = 1e-6)
.MODEL RVTHRESMOD RES (TC1 = -1.8e-3 TC2 = -5.8e-6)
.MODEL RVTEMPMOD RES (TC1 = -1.7e-3 TC2 = 8e-7)
.MODEL S1AMOD VSWITCH (RON = 1e-5
.MODEL S1BMOD VSWITCH (RON = 1e-5
.MODEL S2AMOD VSWITCH (RON = 1e-5
.MODEL S2BMOD VSWITCH (RON = 1e-5
ROFF = 0.1
ROFF = 0.1
ROFF = 0.1
ROFF = 0.1
VON = -4.8 VOFF= -2.8)
VON = -2.8 VOFF= -4.8)
VON = -0.6 VOFF= 0.5)
VON = 0.5 VOFF= -0.6)
.ENDS
For further discussion of the PSPICE model, consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Global
Temperature Options; IEEE Power Electronics Specialist Conference Records, 1991, written by William J. Hepp and C. Frank
Wheatley.
©2002 Fairchild Semiconductor Corporation
RFD16N06LESM Rev. C0
RFD16N06LESM
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
Sync-Lock™
F-PFS™
AccuPower™
®
FRFET®
AX-CAP®*
®*
®
SM
BitSiC™
Global Power Resource
PowerTrench
GreenBridge™
PowerXS™
Build it Now™
TinyBoost®
Green FPS™
Programmable Active Droop™
CorePLUS™
TinyBuck®
®
Green FPS™ e-Series™
QFET
CorePOWER™
TinyCalc™
QS™
Gmax™
CROSSVOLT™
TinyLogic®
GTO™
Quiet Series™
CTL™
TINYOPTO™
IntelliMAX™
RapidConfigure™
Current Transfer Logic™
TinyPower™
ISOPLANAR™
DEUXPEED®
™
TinyPWM™
Dual Cool™
Marking Small Speakers Sound Louder
TinyWire™
EcoSPARK®
Saving our world, 1mW/W/kW at a time™
and Better™
TranSiC™
EfficentMax™
SignalWise™
MegaBuck™
TriFault Detect™
ESBC™
SmartMax™
MICROCOUPLER™
TRUECURRENT®*
SMART START™
MicroFET™
®
SerDes™
Solutions for Your Success™
MicroPak™
SPM®
MicroPak2™
Fairchild®
STEALTH™
MillerDrive™
Fairchild Semiconductor®
UHC®
SuperFET®
MotionMax™
FACT Quiet Series™
®
Ultra FRFET™
SuperSOT™-3
mWSaver
FACT®
UniFET™
SuperSOT™-6
OptoHiT™
FAST®
VCX™
SuperSOT™-8
OPTOLOGIC®
FastvCore™
VisualMax™
OPTOPLANAR®
SupreMOS®
FETBench™
VoltagePlus™
SyncFET™
FPS™
XS™
tm
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used here in:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2.
A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system, or to affect its safety or
effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website,
www.Fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild
Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of
up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and
warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is
committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative / In Design
Datasheet contains the design specifications for product development. Specifications
may change in any manner without notice.
Preliminary
First Production
Datasheet contains preliminary data; supplementary data will be published at a later
date. Fairchild Semiconductor reserves the right to make changes at any time without
notice to improve design.
No Identification Needed
Full Production
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve the design.
Obsolete
Not In Production
Datasheet contains specifications on a product that is discontinued by Fairchild
Semiconductor. The datasheet is for reference information only.
Rev. I66
©2002 Fairchild Semiconductor Corporation
RFD16N06LESM Rev. C0
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com