DATA SHEET
www.onsemi.com
General Purpose
Transistors
COLLECTOR
3
PNP Silicon
1
BASE
BC807-16L, BC807-25L,
BC807-40L
2
EMITTER
Features
• S Prefix for Automotive and Other Applications Requiring Unique
•
3
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
1
2
SOT−23
CASE 318
STYLE 6
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector − Emitter Voltage
VCEO
−45
V
Collector − Base Voltage
VCBO
−50
V
Emitter − Base Voltage
VEBO
−5.0
V
IC
−500
mAdc
Characteristic
Symbol
Max
Unit
Total Device Dissipation FR− 5 Board,
(Note 1) TA = 25°C
Derate above 25°C
PD
225
1.8
mW
mW/°C
436
°C/W
300
2.4
mW
mW/°C
Collector Current − Continuous
THERMAL CHARACTERISTICS
Thermal Resistance,
Junction−to−Ambient (Note 1)
RqJA
Total Device Dissipation Alumina
Substrate, (Note 1) TA = 25°C
Derate above 25°C
PD
Thermal Resistance,
Junction−to−Ambient (Note 2)
RqJA
417
°C/W
TJ, Tstg
−55 to +150
°C
Junction and Storage Temperature
MARKING DIAGRAM
5xx M G
G
1
5xx = Device Code
xx = A1, B1, or C
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or overbar may
vary depending upon manufacturing location.
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−4 Board, 1 oz. Cu, 100mm2.
2. Alumina = 0.4 x 0.3 x 0.024 in 99.5% alumina.
© Semiconductor Components Industries, LLC, 1997
October, 2021 − Rev. 16
1
Publication Order Number:
BC807−16LT1/D
BC807−16L, BC807−25L, BC807−40L
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
Collector −Emitter Breakdown Voltage
(IC = −10 mA)
V(BR)CEO
−45
−
−
V
Collector −Emitter Breakdown Voltage
(VEB = 0, IC = −10 mA)
V(BR)CES
−50
−
−
V
Emitter −Base Breakdown Voltage
(IE = −1.0 mA)
V(BR)EBO
−5.0
−
−
V
−
−
−
−
−100
−5.0
nA
mA
100
160
250
40
−
−
−
−
250
400
600
−
OFF CHARACTERISTICS
Collector Cutoff Current
(VCB = −20 V)
(VCB = −20 V, TJ = 150°C)
ICBO
ON CHARACTERISTICS
DC Current Gain
(IC = −100 mA, VCE = −1.0 V)
hFE
BC807−16, SBC80−16L
BC807−25, SBC807−25L
BC807−40, SBC807−40L
(IC = −500 mA, VCE = −1.0 V)
−
Collector −Emitter Saturation Voltage
(IC = −500 mA, IB = −50 mA)
VCE(sat)
−
−
−0.7
V
Base −Emitter On Voltage
(IC = −500 mA, VCE = −1.0 V)
VBE(on)
−
−
−1.2
V
fT
100
−
−
MHz
Cobo
−
10
−
pF
SMALL−SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product
(IC = −10 mA, VCE = −5.0 Vdc, f = 100 MHz)
Output Capacitance
(VCB = −10 V, f = 1.0 MHz)
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
ORDERING INFORMATION
Device
BC807−16LT1G
SBC807−16LT1G*
BC807−16LT3G
SBC807−16LT3G*
BC807−25LT1G
SBC807−25LT1G*
BC807−25LT3G
SBC807−25LT3G*
BC807−40LT1G
SBC807−40LT1G*
BC807−40LT3G
SBC807−40LT3G*
Specific Marking
Package
Shipping†
5A1
3000 / Tape & Reel
5A1
10,000 / Tape & Reel
5B1
SOT−23
(Pb−Free)
3000 / Tape & Reel
5B1
10,000 / Tape & Reel
5C
3000 / Tape & Reel
5C
10,000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
www.onsemi.com
2
BC807−16L, BC807−25L, BC807−40L
TYPICAL CHARACTERISTICS − BC807−16LT1
500
1
400
VCE(sat), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
hFE, DC CURRENT GAIN
VCE = 1 V
150°C
300
25°C
200
−55°C
100
0
0.001
0.01
0.01
0.1
1
Figure 1. DC Current Gain vs. Collector
Current
Figure 2. Collector Emitter Saturation Voltage
vs. Collector Current
VBE(on), BASE−EMITTER VOLTAGE (V)
−55°C
IC/IB = 10
25°C
0.8
150°C
0.7
0.6
0.5
0.4
0.3
0.0001
0.001
0.01
0.1
1
1.2
VCE = 5 V
1.1
1.0
−55°C
0.9
0.8
25°C
0.7
0.6
150°C
0.5
0.4
0.3
0.2
0.0001
0.001
0.01
0.1
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 3. Base Emitter Saturation Voltage vs.
Collector Current
Figure 4. Base Emitter Voltage vs. Collector
Current
1000
fT, CURRENT−GAIN−BANDWIDTH
PRODUCT (MHz)
VBE(sat), BASE−EMITTER
SATURATION VOLTAGE (V)
0.001
IC, COLLECTOR CURRENT (A)
0.9
0.2
−55°C
0.1
IC, COLLECTOR CURRENT (A)
1.1
1.0
150°C
25°C
0.01
1
0.1
IC/IB = 10
VCE = 1 V
TA = 25°C
100
10
0.1
1
10
100
1000
IC, COLLECTOR CURRENT (mA)
Figure 5. Current Gain Bandwidth Product vs.
Collector Current
www.onsemi.com
3
1
BC807−16L, BC807−25L, BC807−40L
VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS)
TYPICAL CHARACTERISTICS − BC807−16LT1
-1.0
TJ = 25°C
-0.8
IC =
-500 mA
-0.6
-0.4
IC = -300 mA
-0.2
IC = -100 mA
IC = -10 mA
0
-0.01
-0.1
-1.0
-10
IB, BASE CURRENT (mA)
-100
100
+1.0
qVC for VCE(sat)
C, CAPACITANCE (pF)
θV, TEMPERATURE COEFFICIENTS (mV/°C)
Figure 6. Saturation Region
0
-1.0
-2.0
-1.0
qVB for VBE
-10
-100
IC, COLLECTOR CURRENT (mA)
Cib
10
Cob
1.0
-0.1
-1000
Figure 7. Temperature Coefficients
-1.0
-10
VR, REVERSE VOLTAGE (VOLTS)
Figure 8. Capacitances
www.onsemi.com
4
-100
BC807−16L, BC807−25L, BC807−40L
TYPICAL CHARACTERISTICS − BC807−25LT1
500
1
VCE = 1 V
VCE(sat), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
hFE, DC CURRENT GAIN
150°C
400
25°C
300
200
−55°C
100
0
0.001
0.01
0.01
0.1
1
Figure 9. DC Current Gain vs. Collector
Current
Figure 10. Collector Emitter Saturation Voltage
vs. Collector Current
VBE(on), BASE−EMITTER VOLTAGE (V)
−55°C
IC/IB = 10
25°C
0.8
150°C
0.7
0.6
0.5
0.4
0.3
0.0001
0.001
0.01
0.1
1
1.2
VCE = 5 V
1.1
1.0
−55°C
0.9
0.8
25°C
0.7
0.6
150°C
0.5
0.4
0.3
0.2
0.0001
0.001
0.01
0.1
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 11. Base Emitter Saturation Voltage vs.
Collector Current
Figure 12. Base Emitter Voltage vs. Collector
Current
1000
fT, CURRENT−GAIN−BANDWIDTH
PRODUCT (MHz)
VBE(sat), BASE−EMITTER
SATURATION VOLTAGE (V)
0.001
IC, COLLECTOR CURRENT (A)
0.9
0.2
−55°C
0.1
IC, COLLECTOR CURRENT (A)
1.1
1.0
150°C
25°C
0.01
1
0.1
IC/IB = 10
VCE = 1 V
TA = 25°C
100
10
0.1
1
10
100
IC, COLLECTOR CURRENT (mA)
Figure 13. Current Gain Bandwidth Product
vs. Collector Current
www.onsemi.com
5
1000
1
BC807−16L, BC807−25L, BC807−40L
VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS)
TYPICAL CHARACTERISTICS − BC807−25LT1
-1.0
TJ = 25°C
-0.8
IC =
-500 mA
-0.6
-0.4
IC = -300 mA
-0.2
IC = -100 mA
IC = -10 mA
0
-0.01
-0.1
-1.0
-10
IB, BASE CURRENT (mA)
-100
100
+1.0
qVC for VCE(sat)
C, CAPACITANCE (pF)
θV, TEMPERATURE COEFFICIENTS (mV/°C)
Figure 14. Saturation Region
0
-1.0
-2.0
-1.0
qVB for VBE
-10
-100
IC, COLLECTOR CURRENT (mA)
Cib
10
Cob
1.0
-0.1
-1000
Figure 15. Temperature Coefficients
-1.0
-10
VR, REVERSE VOLTAGE (VOLTS)
Figure 16. Capacitances
www.onsemi.com
6
-100
BC807−16L, BC807−25L, BC807−40L
TYPICAL CHARACTERISTICS − BC807−40LT1
1000
1
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR−EMITTER
SATURATION VOLTAGE (V)
VCE = 1 V
900
150°C
800
700
600
500
25°C
400
300
−55°C
200
100
0
0.001
0.01
0.01
0.1
1
Figure 17. DC Current Gain vs. Collector
Current
Figure 18. Collector Emitter Saturation Voltage
vs. Collector Current
VBE(on), BASE−EMITTER VOLTAGE (V)
−55°C
IC/IB = 10
25°C
0.8
150°C
0.7
0.6
0.5
0.4
0.3
0.0001
0.001
0.01
0.1
1
1.2
VCE = 5 V
1.1
1.0
0.9
−55°C
0.8
25°C
0.7
0.6
0.5
150°C
0.4
0.3
0.2
0.0001
0.001
0.01
0.1
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 19. Base Emitter Saturation Voltage vs.
Collector Current
Figure 20. Base Emitter Voltage vs. Collector
Current
1000
fT, CURRENT−GAIN−BANDWIDTH
PRODUCT (MHz)
VBE(sat), BASE−EMITTER
SATURATION VOLTAGE (V)
0.001
IC, COLLECTOR CURRENT (A)
0.9
0.2
−55°C
0.1
IC, COLLECTOR CURRENT (A)
1.1
1.0
150°C
25°C
0.01
1
0.1
IC/IB = 10
VCE = 1 V
TA = 25°C
100
10
0.1
1
10
100
IC, COLLECTOR CURRENT (mA)
Figure 21. Current Gain Bandwidth Product
vs. Collector Current
www.onsemi.com
7
1000
1
BC807−16L, BC807−25L, BC807−40L
VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS)
TYPICAL CHARACTERISTICS − BC807−40LT1
-1.0
TJ = 25°C
-0.8
IC =
-500 mA
-0.6
-0.4
IC = -300 mA
-0.2
IC = -100 mA
IC = -10 mA
0
-0.01
-0.1
-1.0
-10
IB, BASE CURRENT (mA)
-100
100
+1.0
qVC for VCE(sat)
C, CAPACITANCE (pF)
θV, TEMPERATURE COEFFICIENTS (mV/°C)
Figure 22. Saturation Region
0
-1.0
-2.0
-1.0
qVB for VBE
-10
-100
IC, COLLECTOR CURRENT (mA)
Cib
10
Cob
1.0
-0.1
-1000
Figure 23. Temperature Coefficients
-1.0
-10
VR, REVERSE VOLTAGE (VOLTS)
Figure 24. Capacitances
www.onsemi.com
8
-100
BC807−16L, BC807−25L, BC807−40L
TYPICAL CHARACTERISTICS − BC807−16LT1, BC807−25LT1, BC807−40LT1
IC, COLLECTOR CURRENT (A)
1
1 mS
1S
100 mS
0.1
10 mS
Thermal Limit
0.01
0.001
0.1
1
10
VCE, COLLECTOR EMITTER VOLTAGE (V)
Figure 25. Safe Operating Area
www.onsemi.com
9
100
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AS
DATE 30 JAN 2018
SCALE 4:1
D
0.25
3
E
1
2
T
HE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.
MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF
THE BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
DIM
A
A1
b
c
D
E
e
L
L1
HE
T
L
3X b
L1
VIEW C
e
TOP VIEW
A
A1
SIDE VIEW
SEE VIEW C
c
MIN
0.89
0.01
0.37
0.08
2.80
1.20
1.78
0.30
0.35
2.10
0°
MILLIMETERS
NOM
MAX
1.00
1.11
0.06
0.10
0.44
0.50
0.14
0.20
2.90
3.04
1.30
1.40
1.90
2.04
0.43
0.55
0.54
0.69
2.40
2.64
−−−
10 °
MIN
0.035
0.000
0.015
0.003
0.110
0.047
0.070
0.012
0.014
0.083
0°
INCHES
NOM
0.039
0.002
0.017
0.006
0.114
0.051
0.075
0.017
0.021
0.094
−−−
MAX
0.044
0.004
0.020
0.008
0.120
0.055
0.080
0.022
0.027
0.104
10°
GENERIC
MARKING DIAGRAM*
END VIEW
RECOMMENDED
SOLDERING FOOTPRINT
XXXMG
G
1
3X
2.90
3X
XXX = Specific Device Code
M = Date Code
G
= Pb−Free Package
0.90
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
0.95
PITCH
0.80
DIMENSIONS: MILLIMETERS
STYLE 1 THRU 5:
CANCELLED
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
STYLE 7:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
STYLE 9:
PIN 1. ANODE
2. ANODE
3. CATHODE
STYLE 10:
PIN 1. DRAIN
2. SOURCE
3. GATE
STYLE 11:
STYLE 12:
PIN 1. ANODE
PIN 1. CATHODE
2. CATHODE
2. CATHODE
3. CATHODE−ANODE
3. ANODE
STYLE 15:
PIN 1. GATE
2. CATHODE
3. ANODE
STYLE 16:
PIN 1. ANODE
2. CATHODE
3. CATHODE
STYLE 17:
PIN 1. NO CONNECTION
2. ANODE
3. CATHODE
STYLE 18:
STYLE 19:
STYLE 20:
PIN 1. NO CONNECTION PIN 1. CATHODE
PIN 1. CATHODE
2. CATHODE
2. ANODE
2. ANODE
3. GATE
3. ANODE
3. CATHODE−ANODE
STYLE 21:
PIN 1. GATE
2. SOURCE
3. DRAIN
STYLE 22:
PIN 1. RETURN
2. OUTPUT
3. INPUT
STYLE 23:
PIN 1. ANODE
2. ANODE
3. CATHODE
STYLE 24:
PIN 1. GATE
2. DRAIN
3. SOURCE
STYLE 27:
PIN 1. CATHODE
2. CATHODE
3. CATHODE
STYLE 28:
PIN 1. ANODE
2. ANODE
3. ANODE
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42226B
SOT−23 (TO−236)
STYLE 8:
PIN 1. ANODE
2. NO CONNECTION
3. CATHODE
STYLE 13:
PIN 1. SOURCE
2. DRAIN
3. GATE
STYLE 25:
PIN 1. ANODE
2. CATHODE
3. GATE
STYLE 14:
PIN 1. CATHODE
2. GATE
3. ANODE
STYLE 26:
PIN 1. CATHODE
2. ANODE
3. NO CONNECTION
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative