SMA3101-TL-E

Ordering number : ENA1431B SMA3101 MMIC Amplifier, 5V, 10mA, 0.1 to 3GHz, MCPH6 http://onsemi.com Features • • • • High Gain Wideband response Low current Port impedance : Gp=25dB typ. @1GHz : fu=3.0GHz : ICC=10mA typ. : input/output 50Ω Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Supply Voltage Conditions Ratings Unit VCC ICC 6 V 25 mA PD Topr 280 mW Operating Temperature --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Circuit Current Allowable Power Dissipation Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7022A-018 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 0 to 0.02 1 2 Marking TL 3 0.65 LA LOT No. 0.3 0.85 0.25 Packing Type : TL 4 LOT No. 0.07 SMA3101-TL-E 0.15 2.1 1.6 0.25 2.0 1 2 3 1 : VCC 2 : GND 3 : OUT 4 : GND 5 : GND 6 : IN 6 5 4 MCPH6 Semiconductor Components Industries, LLC, 2013 August, 2013 72512 TKIM/93009 TKIM/42209AM MSIM TC-00001893 No. A1431-1/8 SMA3101 Recommended Operating Condition at Ta=25°C Parameter Supply Voltage Operating Ambient Temperature Symbol Conditions VCC Topr Ratings min typ Unit max 4.5 5 5.5 V --40 +25 +85 °C Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted. Electrical Characteristics at Ta=25°C, VCC=5V, Zs=ZL=50Ω Parameter Circuit Current Symbol Conditions Gp Isolation ISL Input Return Loss RLin Output Return Loss RLout Noise Figure NF Gain 1dB Compression Output Power Po(1dB) Upper Limit Operating Frequency fu typ max 7.1 10.0 12.6 f=1GHz 21.5 25.0 28.5 f=2.2GHz 21.5 25.5 28.5 f=1GHz 33.0 38.0 f=2.2GHz 31.0 36.0 f=1GHz 11.0 16.0 f=2.2GHz 12.0 21.0 f=1GHz 10.0 18.5 8.0 12.0 ICC Power Gain Ratings min f=2.2GHz dB 4.0 5.3 4.0 5.3 --5.0 --2.0 --7.0 --4.0 3dB down below flat gain at f =1GHz 3.0 dB dB f=2.2GHz f=1GHz mA dB f=1GHz f=2.2GHz Unit dB dBm GHz Ordering Information Device SMA3101-TL-E Package Shipping memo MCPH6 3,000pcs./reel Pb Free No. A1431-2/8 SMA3101 Equivalent Circuit VCC OUT IN IT14496 Test Circuit 100pF IN 6 5 4 1 2 3 100pF OUT 1000pF VCC Connect 2, 4 and 5 with GND. IT14497 Design of the Evaluation Board IN OUT C1 C3 C2 VCC Symbol C1, C3 C2 Value 100pF 1000pF No. A1431-3/8 SMA3101 ICC -- VCC 14 Circuit Current, ICC -- mA 12 10 8 6 4 2 0 0 1 2 3 4 5 Circuit Voltage, VCC -- V 6 IT14487 Gp -- f 30 5.5V Input Return Loss, RLin -- dB --5 Power Gain , Gp -- dB 5.0V 4.5V 25 20 15 1000 0 2000 3000 --30 5.0V 5.5V 4.5V 1000 2000 3000 --30 0 1000 2000 Pout -- Pin 3000 4000 IT14489 RLout -- f --5 5.0V --10 5.5V --15 4.5V --20 --25 --30 0 1000 2000 3000 4000 Frequency, f -- MHz VCC=5.0V f=1.0GHz IT14491 Pout -- Pin 10 VCC=5.0V f=2.2GHz 5 Output Level, Pout -- dBm Output Level, Pout -- dBm --25 IT14490 5 0 --5 --10 --15 --20 --60 5.5V --35 4000 Frequency, f -- MHz 10 --20 Frequency, f -- MHz Output Return Loss, RLout -- dB Isolation, ISL -- A --20 0 5.0V 0 --10 --50 4.5V --15 IT14488 ISL -- f --40 --10 --35 4000 Frequency, f -- MHz 0 RLin -- f 0 0 --5 --10 --15 --50 --40 --30 --20 Input Level, Pin -- dBm --10 0 IT14492 --20 --60 --50 --40 --30 --20 Input Level, Pin -- dBm --10 0 IT14493 No. A1431-4/8 SMA3101 S Parameter S11 S22 50 50 100 25 250 10 25 3GHz 10 0 50 100 100 25 250 250 10 10 0 2GHz 25 50 1GHz 100 250 3GHz 1GHz 2GHz --10 --250 --25 --10 --250 --25 --100 --50 IT14494 --100 --50 IT14495 No. A1431-5/8 SMA3101 Embossed Taping Specification SMA3101-TL-E No. A1431-6/8 SMA3101 Outline Drawing SMA3101-TL-E Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No. A1431-7/8 SMA3101 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1431-8/8