SMA5101-TL-H

Ordering number : ENA1839A SMA5101 MMIC http://onsemi.com Mixer, IIP3=15dBm, Gc=-0.5dB@450MHz, MCPH6 Features • • • Wide band : up to Ku band Low distortion : IIP3=20dBm (@ICC > 11mA) SMT, Ultra small package : 2.0×2.1×0.85mm • • • High conversion gain : --0.5dB (@450MHz) Low voltage available : 1.2V and above Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Max Power Dissipation Conditions Ratings Unit VCBO VCEO 8 V 6 V VEBO ICC 2 V 50 mA 280 mW Operating Temperature PC Topr --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7022A-020 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 Marking 0 to 0.02 1 2 TL 3 0.65 LD LOT No. 0.3 0.85 0.25 Packing Type : TL 4 LOT No. 0.07 SMA5101-TL-H 0.15 2.1 1.6 0.25 2.0 1 2 3 1 : Base2 2 : Collector1 3 : Collector2 4 : Emitter2 5 : Emitter1 6 : Base1 6 5 4 MCPH6 Equivalent Circuit 1 2 6 3 5 4 IT15506 Semiconductor Components Industries, LLC, 2013 August, 2013 90512 TKIM/O0610AM TKIM TC-00002495 No. A1839-1/7 SMA5101 Recommended Operating Condition at Ta=25°C Parameter Symbol Supply Voltage Ratings Conditions min typ Unit max VC1E1 1.2 3 6 V VC2E1 1.2 3 6 V VC1E2 1.2 3 6 V VC2E2 1.2 3 6 V Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain Conversion Gain *1 Ratings Conditions min typ Unit max IC1B1O VC1B1=5V 1 μA IC2B1O VC2B1=5V 1 μA IC1B2O VC1B2=5V 1 μA IC2B2O VC2B2=5V 1 μA IE1B1O VE1B1=1V 1 μA IE2B1O VE2B1=1V 1 μA IE1B2O VE1B2=1V 1 μA IE2B2O VE2B2=1V 1 μA hFE1 VC1E1=1V, IC1E1=3mA 20 120 hFE2 VC2E1=1V, IC2E1=3mA 20 120 hFE3 20 120 hFE4 VC1E2=1V, IC1E2=3mA VC2E2=1V, IC2E2=3mA 20 120 Gc VCC=5V, ICC=6mA, f(RF)=450MHz, f(LO)=500MHz, --0.5 dB P(RF)=--15dBm, P(LO)=--6dBm Input Intercept Point *1 VCC=5V, ICC=6mA, f(RF1)=450MHz, f(RF2)=451MHz, IIP3 15 f(LO)=500MHz, dBm P(RF1)=P(RF2)=--15dBm, P(LO)=--6dBm *1 : On evaluation board Ordering Information Device SMA5101-TL-H Package Shipping memo MCPH6 3,000pcs./reel Pb Free and Halogen Free Measurement Circuit VCC Balun Balun 0.1μF SMA5101 LD RF 0.1μF IF Balun 10kΩ 0.1μF 0.1μF VB LO IT15507 No. A1839-2/7 SMA5101 Evaluation Board C4 T3 T1 RF IF IC C3 R1 T2 VCC R2 C2 IC : SMA5101 T1 to T3 : Balun C1 to C4 : 0.1μF R1 : 10kΩ R2 : 0Ω (short) C1 VB LO IT15508 Circuit Example (Self Bias) Balun Balun 0.1μF SMA5101 IF LD RF 0.1μF Rbias Balun VCC 0.1μF 0.1μF LO IT15509 No. A1839-3/7 SMA5101 P1dB -- ICC 10 VCC=5V f(RF)=450MHz f(LO)=500MHz P(RF)= --15dBm 5 m = O) dB --3 P(L 0 Gc -- dB P1dB -- dBm 5 Bm d --6 P(LO)= --3dBm 0 --6dBm 0dBm Bm --5 --10 --5 0d 0 5 10 15 20 Collector Current, ICC -- mA Bm 20 )= LO --10 0 5 10 15 Collector Current, ICC -- mA 20 25 IT15977 Bm d --6 0d m dB P( 15 25 IT15976 IIP3 -- ICC 25 IIP3 -- dBm Gc -- ICC 10 VCC=5V f(RF)=450MHz f(LO)=500MHz --3 10 VCC=5V f(RF1)=450MHz f(RF2)=451MHz f(LO)=500MHz P(RF)= --15dBm 5 0 0 5 10 15 Collector Current, ICC -- mA 20 25 IT15978 No. A1839-4/7 SMA5101 Embossed Taping Specification SMA5101-TL-H No. A1839-5/7 SMA5101 Outline Drawing SMA5101-TL-H Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No. A1839-6/7 SMA5101 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1839-7/7