OPB903

Photologic® Slotted Optical Switch “Wide Gap” Series OPB900 through OPB913 Series (L, W__Z) L Series Features: • • • • • 0.375” (9.5 mm) wide gap Choice of logical output configurations Choice of opaque or IR transmissive housing material Choice of PCBoard or 26 AWG, UL rated wire Data rates to 250 kBaud W Series Product Photo Here Description: The OPB900 - OPB913 series of Photologic® Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.375” (9.5mm) wide slot, a user can specify the type and polarity of the TTL output and the type of shell material. Electrical output can be specified as either TTL Totem Pole (buffered) or TTL Open Collector, either of which can be supplied with an inverted output polarity. All versions have the added stability of hysteresis built into the amplification circuitry. Applications: • • • • • Mechanical switch replacement Speed indication (tachometer) Mechanical limit indication Edge sensing Object sensing Part Number Guide — OPB900 Series (L, W) OPB9_ _ _ _ _ _ 0 = Dust protection with apertures 1 = Open apertured 0 = Totem Pole 1 = Open Collector 2 = Inverted Totem Pole 3 = Inverted Open Collector L55 = Solder lead termination (PCBoard mount) W5_Z= 26 AWG wire termination (24” [61cm] long) Aperture sizes: 1 = 0.010” (0.25 mm) 5 = 0.050” (1.52 mm) Totem Pole Output Totem-Pole-Output OpenOpen-Collector-Output Collector Output Inverted Output Series Inverted Totem-Pole Inverted Open Collector RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 09/06 Page 1 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Photologic® Slotted Optical Switch “Wide Gap” Series OPB900 through OPB913 Series (L, W__Z) DIMENSIONS ARE IN: [ MILLIMETERS] INCHES Color-Pin # Red-1 Description Anode Color-Pin # Black-2 Description Color-Pin # Description Cathode White-3 VCC Color-Pin # Blue-4 Description Color-Pin # Description Output Green-5 Ground Absolute Maximum Ratings (TA = -40°C to + 70° Unless otherwise noted) Storage Temperature Operating Temperature Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(1) Input Infrared LED DC Forward Diode (LED) Current DC Reverse Diode (LED) Voltage Input Diode Power Dissipation Output Photologic® Supply Voltage, VCC (not to exceed 3 seconds) Voltage at Output Lead (Open Collector Output version) Output Photologic® Power Dissipation(2) Total Device Power Dissipation (3) (1) -40° C to +85° C -40° C to +70° C 260° C 40 mA 2V 100 mW 10V 35 V 200 mW 300 mW Notes: (1) Derate linearly 2.22 mW/°C above 25°C (2) Derate linearly 4.44 mW/°C above 25°C (3) Derate linearly 6.66 mW/°C above 25°C (4) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (5) Methanol or isopropanol are recommended as cleaning agents. The plastic housing is soluble in chlorinated hydrocarbons and keytones. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 09/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Photologic® Slotted Optical Switch “Wide Gap” Series OPB900 through OPB913 Series (L, W__Z) Electrical Characteristics (TA = -40°C to + 70° Unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OPB240 for more information — for reference only) VF IR Forward Voltage Reverse Current 1.7 100 V µA IF = 20 mA, TA = 25° C VR = 2 V, TA = 25° C Output Photologic® Sensor (See OPB560 for more information — for reference only) VCC Operating D.C. Supply Voltage Low Level Supply Current: Buffered Totem-Pole Output Buffered Open-Collector Output Inverted Totem-Pole Output Inverted Open-Collector Output High Level Supply Current: Buffered Totem-Pole Output Buffered Open-Collector Output Inverted Totem-Pole Output Inverted Open-Collector Output Low Level Supply Current: Buffered Totem-Pole Output Buffered Open-Collector Output Inverted Totem-Pole Output Inverted Open-Collector Output VOH High Level Output Voltage: Buffered Totem-Pole Output Inverted Totem-Pole Output High Level Output Current: Buffered Open-Collector Output Inverted Open-Collector Output IF(+) IF(+)/IF(-) LED Positive-Going Threshold Current Hysteresis Short Circuit Output Current: Buffered Totem-Pole Output Inverted Totem-Pole Output tr, tf tPLH, tPHL Output Rise Time, Output Fall Time Propagation Delay Low-High and HighLow 4.75 5.25 15 V mA VCC = 5.25 V, IF = 0 mA(1) VCC = 5.25 V, IF = 20 mA(1) VCC = 5.25 V, IF = 20 mA(1) VCC = 5.25 V, IF = 0 mA(1) VCC = 4.75 V, IOL = 12.8 mA, IF = 0 mA(1) VCC = 4.75 V, IOL = 12.8 mA , IF = 20 mA(1) ICCL - - 15 mA - - 15 mA ICCH - - 15 mA - - 0.4 V VOL 2.4 2.4 -30 -30 - 2 70 5 0.4 100 100 20 -100 -100 - V V V µA µA mA mA mA ns µs VCC = 4.75 V, IOH = -800 µA, IF = 20 mA(1) VCC = 4.75 V, IOH = -800 µA, IF = 0 mA(1) VCC = 4.75 V, VOH = 30 V, TA = 25° C VCC = 4.75 V, VOH = 30 V, TA = 25° C VCC = 5 V, TA = 25° C VCC = 5 V VCC = 5.25 V, IF = 20 mA Output = GND VCC = 5.25 V, IF = 0 mA Output = GND VCC = 5 V, TA = 25° C IF = 0 or 20 mA RL = 8 TTL Loads (Totem-Pole) RL = 360 Ω (Open-Collector) IOH IOS Notes: (1) Normal application would be with light source blocked, simulated by IF = 0 mA. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.2 09/06 Page 3 of 4 Photologic® Slotted Optical Switch “Wide Gap” Series OPB900 through OPB913 Series (L, W__Z) OPB900 - Flag Next to Emitter 1.20 1.20 OPB900 - Flag Next to Sensor 1.00 Right to Left Right to Left (back) 1.00 Right to Left Right to Left (back) 0.80 Top to Bottom Bottom to Top 0.80 Top to Bottom Logic Logic 0.60 Left to Right 0.60 Bottom to Top Left to Right Left to Right (back) 0.40 0.40 Left to Right (back) 0.20 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPB900 - Flag in Middle of Slot 1.20 1.00 Right to Left Right to Left (back) 0 Top to Bottom 0.80 Top to Bottom Bottom to Top Logic 0.60 Emitter Left to Right 0.40 Left to Right (back) Left to Right Right to Left Sensor 0.20 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 09/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com