OTS-1HDR2DTR-NOC-IC

OTS-1HD1ETR Optiva Standard, ™ 1 HD-SDI 270/1485 Mbps w/Loopback and 1 Duplex 10/100 Mbps Ethernet HD-SDI Video and Ethernet Transmission The OTS-1HD1ETR provides for the digital transmission of 1 Channel of HD-SDI Video with Loopback and 1 Channel of Duplex 10/100 Ethernet , at absolute broadcast quality. System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 2,056 Mbps. S T A T U S A L E R T Ethernet Data In Ethernet Data Out Video HD-SDI Video In HD Video Loopback Out HD-SDI Video Out HD Video Loopback Out Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Audio S T A T U S A L E R T ST, LC, SC or FC ™ Optiv a ™ Optiv a ST, LC, SC or FC Data VAD Transmission VAD Transmission OTS-1HDT1ETR OTS-1HDR1ERT Ethernet Features • Uncompressed HD-SDI Video over one fiber • TDM - Single fiber, dual wavelength • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** OTS-1HDR1ERT-B3M/B1-XX-IC OTS-1HDR1ERT-B3/B2-XX-IC OTS-1HDR1ERT-B3D/B2-XX-IC OTS-1HDR1ERT-B3H/B2-XX-IC OTS-1HDR1ERT-L4/L4-XX-IC OTS-1HDR2DTR-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 1.5 20 40 60 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) 1310/1550 Multimode OTS-1HDT1ETR-B1/B3M-XX-IC 1310/1550 Singlemode OTS-1HDT1ETR-B2/B3-XX-IC 1310/1550 Singlemode (D) OTS-1HDT1ETR-B2/B3D-XX-IC 1310/1550 Singlemode (H) OTS-1HDT1ETR-B2/B3H-XX-IC 1270-1610 SM (CWDM) OTS-1HDT1ETR-L4/L4-XX-IC Non-Optical Version OTS-1HDT2DTR-NOC-IC Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological Test Code Nominal Bit Rate Bit error rate Connector Data Standard Data Rate Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring SMPTE 292 & 259 RP-178 1.485 Gbps; 270 Mbps 10-14 BNC (IEC 60169-8 Gold Plated) Optiva™ Configurable Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite 11 oz CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration