OTS-1SDT1ETR-NOC-IC

Optiva Standard, 1 SDI 270 Mbps and 1 Duplex 10/100 Mbps Ethernet ™ OTS-1SD1ETR SDI Video and Ethernet Transmission The OTS-1SD1ETR provides for the digital transmission of 1 Channel of uncompressed SDI Video and 1 Channel of duplex 10/100 Ethernet, at absolute broadcast quality. Ethernet Data In Ethernet Data Out Video System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path S T A T U S A L E R T S T A T U S A L E R T Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. SDI Video Out ST, LC, SC or FC For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Audio SDI Video In ST, LC, SC or FC ™ Optiv a ™ Optiv a Data VAD Transmission VAD Transmission OTS-1SDT1ETR OTS-1SDR1ERT Ethernet Features • Uncompressed SDI Video and 10/100 Ethernet over one fiber • TDM - Single fiber, dual wavelength • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). The Optiva™ bandwidth requirement of this system is 523 Mbps. Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-1SDT1ETR-A2/A3M-XX-IC OTS-1SDT1ETR-A2/A3-XX-IC OTS-1SDT1ETR-A2/A3D-XX-IC OTS-1SDT1ETR-A2/A3H-XX-IC OTS-1SDT1ETR-L4/L4-XX-IC OTS-1SDT1ETR-NOC-IC Receive/Transmit** OTS-1SDR1ERT-A3M/A2-XX-IC OTS-1SDR1ERT-A3/A2-XX-IC OTS-1SDR1ERT-A3D/A2-XX-IC OTS-1SDR1ERT-A3H/A2-XX-IC OTS-1SDR1ERT-L4/L4-XX-IC OTS-1SDR1ERT-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account; link budget and range may be affected by bandwidth required. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological test code Bit rate Bit error rate Connector Data Standard Data Rate Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring SMPTE 259 RP-178 270 Mbps 10-14 BNC (IEC 60169-8) Optiva™ Configurable Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite 11 oz CATV/RF & L-Band Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration