OTS-1V2ATR1DTR1ETR

Optiva™ Standard, 1 Composite Video, 2 Duplex Analog Audio,1 Duplex RS-232/422/485 and 1 Duplex 10/100 Mbps Ethernet OTS-1V2ATR1DTR1ETR Composite Video, Audio, Serial Data and Ethernet Transmission The OTS-1V2ATR1DTR1ETR provides for the digital transmission of 1 Channel of Composite Video, 2 Channels of Duplex Analog Audio, 1 Channel of Duplex Serial Data and 1 Channel of Duplex 10/100 Ethernet. System Design Ethernet In/Out Ethernet Out/In Video 2 Analog Audio In/Out S T A T U S A L E R T 2 Analog Audio Out/In S T A T U S A L E R T Serial Data In/Out Serial Data In/Out Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Audio Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). bandwidth requirement The of this system is 542 Mbps. Optiva™ Composite Video In ST, LC, SC or FC Composite Video Out ST, LC, SC or FC ™ Optiv a ™ Optiv a VAD Transmission VAD Transmission OTS-1VT2ATR1DTR1ETR OTS-1VR2ART1DRT1ERT Ethernet Features • Composite Video, Analog Audio, Serial Data and Ethernet over one fiber • 10-Bit Digital Transmission • TDM - Single fiber, dual wavelength • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-1VT2ATR1DTR1ETR-A1/A3M-XX-IC OTS-1VT2ATR1DTR1ETR-A2/A3-XX-IC OTS-1VT2ATR1DTR1ETR-A2/A3D-XX-IC OTS-1VT2ATR1DTR1ETR-A2/A3H-XX-IC OTS-1VT2ATR1DTR1ETR-L4/L4-XX-IC OTS-1VT2ATR1DTR1ETR-NOC-IC Receive/Transmit** OTS-1VR2ART1DRT1ERT-A3M/A1-XX-IC OTS-1VR2ART1DRT1ERT-A3/A2-XX-IC OTS-1VR2ART1DRT1ERT-A3D/A2-XX-IC OTS-1VR2ART1DRT1ERT-A3H/A2-XX-IC OTS-1VR2ART1DRT1ERT-L4/L4-XX-IC OTS-1VR2ART1DRT1RT-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot IC (1-slot) IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Compatibility Signal to Noise Ratio Connector Analog Audio Level Bandwidth Signal to Noise Ratio Total Harmonic Distortion Signal Coding Connector Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Contact Closure Data Rate Ethernet Standard Data Rate Connector General SMPTE 170M; RS-250C 10-Bit Processing; 10-Bit Transmission 1.0 Volt p-p 5.5 MHz < 1% < 0.7° NTSC, PAL > 67 dB BNC (IEC 60169-8) 6 dBm In/Out 20 Hz to 20 KHz > 80 dB < 0.1% 20-bit Micro DB25 Micro DB25 DC to 1 Mbps DC to 1 Mbps DC to 1 Mbps DC to 1 Mbps Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 Impedance Options: Input Balanced 600 Ohm Balanced Hi-Z Unbalanced Hi-Z Optiva™ Multi-Signal Optiva™ Configurable Transmission Platform Communication Platform Network Management Network Management SDI and HD-SDI SDI & HD-SDI Composite Video, Composite Video, Audio & Data Audio & Data Output Balanced 600 Ohm Balanced Low-Z Unbalanced Low-Z Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Data (Ethernet/Serial/USB) CATV/RF & L-Band CATV/RF & L-Band Optical Switching, Routing Optical Switching, Routing & Redundancy & Redundancy Passive Multiplexing Passive Multiplexing Solutions Solutions Enclosures, Racks Enclosures, Racks & Frames & Frames Power Supplies Power Supplies and Accessories & Accessories Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms (Audio