BTR-5820AG

Optoway BTR-5820G / BTR-5820-SPG / BTR-5820AG / BTR-5820A-SPG FEATURES l l l l l l l l l l l l l BTR-5820G 1 *********************************************************************************************************************************************************************** 1310 nm TX / 1490 nm RX , 3.3V / 155 Mbps RoHS Compliant Single-Fiber Transceiver *********************************************************************************************************************************************************************** DESCRIPTION Single Fiber Bi-Directional Transceiver 1310 nm LD Transmitter 1490 nm Receiver 1550 nm Video Block D istance Up to 20 km Industry Standard 1 x 9 Footprint Single +3.3 V Power Supply RoHS Compliant LVPECL Differential Inputs and Outputs 0 to 70oC Operating : BTR-5820G -20 to 85oC Operating : BTR-5820AG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant The BTR-5820G series is high performance module for single fiber communications by using 1310 nm transmitter and 1490 nm receiver. This module is equipped with 3W-TRXTM OE device to reject 1.55 um high power video signal. The transmitter section uses a multiple quantum well 1310 nm laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated 1490 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l l l l WDM 155/622 Mb/s Links SONET/SDH Equipment Interconnect Fiber Channel 532 Mb/s Links CATV ORDER INFORMATION P/No. Bit Rate (Mb/s) 622 622 Distance (km) 20 20 TX (nm) 1310 1310 RX (nm) 1490 1490 Voltage (V) 3.3 3.3 Package Temp (oC) 0 to 70 -20 to 85 TX RX Sens. RoHS Power (dBm) Compliant (dBm) -8 to -14 -28 Yes -8 to -14 -28 Yes BTR-5820G BTR-5820AG 1X9 1X9 Note: 1. BTR-XXXXG is 1X9 SC receptacle type package. 2. BTR-XXXX-APBBBG is 1X9 pigtail type package with different connector, A=S is SC connector, A=F is FC connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm. 3. 3W-TRX TM is trade-mark co-owned by Zenko Technologies Inc. and Optoway Technology Inc. Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -20 0 GND 0 Max 85 70 85 260 4.5 Vcc 30 Units o C o C o Notes BTR-5820G BTR-5820AG 10 seconds on leads only C V V mA *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 0/1/2005 V1.0 Optoway Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Min 3.13 0 -20 50 Typ 3.3 Max 3.47 70 85 650 260 BTR-5820G Units V o C / BTR-5820G o C / BTR-5820AG Mb/s mA 2 *********************************************************************************************************************************************************************** 622 Icc Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Symbol Min Typ Max Units Notes Po -14 ---8 dBm 1 1260 1310 1360 nm λ ----3 nm RMS (σ) ∆λ ER 8.2 ----dB Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 tr 1.2 ns 10% to 90% Values tf 1.2 ns 10% to 90% Values RIN -116 dB/Hz TJ 0.55 ns 2 IIL IIH VIH - VIL VIL - VCC V IH - VCC -350 350 300 -2.0 -1.1 -1.58 -0.74 µA µA mV V V 3 3 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Optical Return Loss Electrical Data Output Voltage – Low Data Output Voltage – High SD Output Voltage -- Low SD Output Voltage -- High Symbol --Pin Pa Pd Min ---3 ---40 1.0 1480 14 -2.0 -1.1 -2.0 -1.1 Typ ----------Max -28 ---28 --4.0 1500 Units dBm dBm dBm dBm dB nm dB V V V V Notes 1 Transition: low to high Transition: high to low 2,3 ORL V OL - VCC V OH - VCC V OL - VCC V OH - VCC -1.58 -0.74 -1.58 -0.74 4 4 4 4 Notes: 1. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 3. At least 30 dB optical isolation for the wavelength 1550 to 1600 nm. 4. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs. ************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 0/1/2005 V1.0 Optoway CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD− ) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) N/C BTR-5820G 3 *********************************************************************************************************************************************************************** TOP VIEW N/C P IN 1 2 3 4 5 6 7 8 9 Symbol Rx GND RD+ RD− SD R x Vcc T x Vcc TD− TD+ Tx GND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +3.3V dc power for the receiver section +3.3V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the transmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. ************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 0/1/2005 V1.0 Optoway PACKAGE DIAGRAM Units in mm 1) Pigtail Type BTR-5820G 4 *********************************************************************************************************************************************************************** BTR-5820-SP50G / BTR-5820A-SP50G Note: Length L is 50 ± 3 cm. Other pigtail’s length is available upon request. 2 ) Receptacle Type BTR-5820G / BTR-5820AG Note: Specifications subject to change without notice. ************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 0/1/2005 V1.0