Optoway
FEATURES
l l l l l l l l l l l l l l l
TRS-7380G
***********************************************************************************************************************************************************************
TRS-7380G / TRS-7380CG / TRS-7380TG / TRS-7380TCG / TRS-7380FG / TRS-7380FCG 3.3V / 1550 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
DESCRIPTION
D uplex SC Single Mode Transceiver: TRS-7380G D uplex ST Single Mode Transceiver: TRS-7380TG D uplex FC Single Mode Transceiver: TRS-7380FG Compliant with IEEE-802.3z Gigabit Ethernet 1550 nm DFB LD Transmitter 22 dB Power Budget At Least 0 to 70oC Operating: TRS-7380G -20 to 85oC Operating: TRS-7380AG Industry Standard 1 x 9 Footprint Single +3.3V Power Supply RoHS Compliant LVPECL Signal Detect Output: TRS-7380G LVTTL Signal Detect Output: TRS-7380CG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 825 Compliant
The TRS-7380 series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such Gigabit Ethernet and Fibre Channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. A guaranteed minimum optical link budget of 22 dB is offered which can correspond to a link distance of over 80 km (assuming worst case fiber loss of 0.25 dB/km). The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC 825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
Package Temp. (oC) TX Power (dBm) 3 to -2 3 to -2 RX Sens. RoHS (dBm) Compliant -24 -24 Y Y
APPLICATIONS
l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops
ORDER INFORMATION
P/No. B it Rate (Mb/s) 1250 1250 1000 BASE ZX ZX Distance Wavelength Voltage (km) (nm) (V) 80 80 1550 DFB 1550 DFB 3 .3 3 .3
TRS-7380G TRS-7380AG
1X9 SC/ST/FC 0 to 70 1X9 SC/ST/FC -20 to 85
Absolute Maximum Ratings
Parameter Storage Temperature O perating Temperature Soldering Temperature P ower Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -20 0 GND 0 Max 85 70 85 260 4.5 Vcc 30 Units o C o C
o
Notes TRS-7380G TRS-7380AG 10 seconds on leads only
C V V
mA
Recommended Operating Conditions
Parameter P ower Supply Voltage O perating Temperature D ata Rate P ower Supply Current Symbol Vcc Topr Min 3.1 0 -20 Typ 3.3 Max 3.5 70 85 1300 280 Units V o C / TRS-7380G o C / TRS-7380AG Mb/s mA
Icc
1250 200
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0
Optoway
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V)
Parameter Optical O ptical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio E xtinction Ratio Output Eye O ptical Rise Time O ptical Fall Time R elative Intensity Noise T otal Jitter E lectrical D ata Input Current – Low D ata Input Current – High D ifferential Input Voltage D ata Input Voltage – Low D ata Input Voltage -- High Symbol Min Typ --1550 ----Max 3 1580 1 --0.26 0.26 -120 0.227 Units dBm nm nm dB dB ns ns dB/Hz ns µA µA mV V V Po -2 1480 λ --∆λ SMSR 30 ER 9 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH VIH - VIL VIL - VCC VIH - VCC -350 350 300 -2.0 -1.1 -1.58 -0.74
TRS-7380G
Notes 1 -20 dB Width
2
*********************************************************************************************************************************************************************
20% to 80% Values 20% to 80% Values 2
3 3
N otes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3.5V)
Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation E lectrical D ata Output Voltage – Low D ata Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min ---3 ---36 1.0 1100 -2.0 -1.1 -2.0 -1.1 2.0 Typ ----------Max -24 ---24 --1600 -1.58 -0.74 -1.58 -0.74 0.8 Units dBm dBm dBm dBm dB nm V V V V V V Notes 1 Transition: low to high Transition: high to low
VOL - VCC VOH - VCC VOL - VCC VOH - VCC VSDL VSDH
3 3 TRS-7380G TRS-7380CG
N otes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 2 7-1 PRBS at Er= 9 dB. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0
Optoway
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD− ) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) N/C
TRS-7380G
3
*********************************************************************************************************************************************************************
TOP VIEW
N/C
PIN 1 2 3 4 5 6 7 8 9
Symbol R x GND RD+ RD− SD Rx Vcc Tx Vcc T D− TD+ T x GND
Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +3.3V dc power for the receiver section +3.3V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the transmitter ground plane
RECOMMENDED CIRCUIT SCHEMATIC
Transceiver
TX GND 9
SerDes IC
VCC 3.3V
LD Driver 100R
TD+ 0.1uF TD0.1uF
8 Z=50R 7 Z=50R 1uH
Vcc 3.3V VCC 3.3V
TD+ LVPECL TD-
TX Vcc
6
10nF
10uF
1uH R1
RX Vcc
5 10nF 10uF R2
SD Level
VCC 3.3V
SD RD0.1uF POST Amp RD+ 0.1uF 180R RX GND 180R
4 3 Z=50R R7 2 Z=50R 1 CDR or PHY DEVICE RD+ LVPECL RD-
For TTL SD Level, R1=R2=N.C., R7=100 ohm For PECL SD Level, R1=130 ohm, R2=82 ohm, R7=100 ohm The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0
Optoway
PACKAGE DIAGRAM
Units in mm
TRS-7380G
4
*********************************************************************************************************************************************************************
1) SC Type With Extended Shielding
TX OPTICAL
RX OPTICAL
TRS-7380-EMG / TRS-7380C-EMG / TRS-7380A-EMG / TRS-7380AC-EMG 2) ST Type
TX OPTICAL
RX OPTICAL
TRS-7380TG / TRS-7380TCG / TRS-7380ATG / TRS-7380ATCG
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0
Optoway
3) FC Type
12.7
TRS-7380G
5
*********************************************************************************************************************************************************************
TX OPTICAL
RX OPTICAL
2.54*8 20.32
25.4
13.9
10
5.97
10.18
20.32
34.5MAX
TRS-7380FG / TRS-7380FCG / TRS-7380AFG / TRS-7380AFCG
N ote: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0
0.7 5
O1.3
13.7
很抱歉,暂时无法提供与“TRS-7380G”相匹配的价格&库存,您可以联系我们找货
免费人工找货