TVL-55733GD035J-LW-G-AAN

R RooH HS S C CO OM MP PLLIIA AN NT T APPROVAL SHEET 承 認 書 Customer 客戶名稱 Part No. 產品型號 Product type 產品內容 RoHS 綠色產品 TVL-55733GD035J-LW-G-AAN 3.5” TFT module: Transmissive Type, Normally white mode , RGB vertical stripe, □Non-compliance ■ Compliance Remarks 備註欄 ■Preliminary Specification 暫行規格 □Final Specification 正式規格 Signature by Customer: 客戶確認簽章: Issued by QA Checked by QA TVL-55733GD035J-LW-G-AAN Ver.C Checked by PM -1- Approved By QA RD Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T Specification of LCD Module Project No.: TVL-55733GD035J-LW-G-AAN Issue date: 2013/02/21 KYOCERA DISPLAY CORPORATION 5-7-18, Higashinippori Arakawa-ku , Tokyo 116-0014, Japan TEL: +81-3-5811-8780 FAX: +81-3-5811-8782 TVL-55733GD035J-LW-G-AAN Ver.C -2- Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T TABLE OF CONTENTS 1. GENERAL DESCRIPTION........................................................................ 5 2. FEATURES ............................................................................................... 5 3. MECHANICAL SPECIFICATION .............................................................. 5 4. MECHANICALDIMENSION ...................................................................... 6 5. MAXIMUM RATINGS ................................................................................ 7 6. ELECTRICAL CHARACTERISTICS ......................................................... 8 6.1. 6.2. TFT LCD Characteristic.......................................................................................... 8 Backlight Characteristic .......................................................................................... 8 7. MODULE FUNCTION DESCRIPTION ...................................................... 9 7.1. 7.2. PIN Description....................................................................................................... 9 Timing characteristics........................................................................................... 11 8. ELECTRO-OPTICAL CHARACTERISTICS ............................................ 16 9. APPLICATION NOTE ............................................................................. 18 9.1. Suggestion of SPI code ........................................................................................ 18 10. RELIABILITY .......................................................................................... 19 10.1. 10.2. 10.3. MTTF ................................................................................................................ 19 TESTS .............................................................................................................. 19 Color performance ............................................................................................ 20 11. INSPECTION CRITERIA......................................................................... 20 11.1. 11.2. 11.3. 11.4. Inspection Conditions........................................................................................ 20 Light Method ..................................................................................................... 21 Classification Of Defects................................................................................... 21 Sampling & Acceptable Quality Level ............................................................... 21 11.5. 11.6. Definition Of Inspection Area ............................................................................ 22 Items and Criteria.............................................................................................. 22 TVL-55733GD035J-LW-G-AAN Ver.C -3- Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 12. ROHS COMPLIANT WARRANTY .......................................................... 25 13. PRECAUTIONS FOR USE...................................................................... 26 13.1. Safety................................................................................................................ 26 13.2. Storage Conditions ........................................................................................... 26 13.3. 13.4. Installing LCD Module ....................................................................................... 26 Precautions for Operation ................................................................................. 26 13.5. 13.6. Handling Precautions........................................................................................ 27 Warranty ........................................................................................................... 27 14. REVISION HISTORY .............................................................................. 27 TVL-55733GD035J-LW-G-AAN Ver.C -4- Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 1. GENERAL DESCRIPTION TVL-55733GD035J-LW-G-AAN is a Transmissive type color active matrix liquid crystal display (LCD), which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT LCD panel, driver ICs, FPC, and a backlight unit. The following table described the features of TVL-55733GD035J-LW-G-AAN. 2. FEATURES Display Mode Transmissive Type TFT LCD, Positive Display Format RGB Strip type Driver IC. ILI9322-B Color 16.7M color Interface 8 bits RGB serial data Viewing Direction Higher Contrast ratio: 6 O’clock Less gray scale reversal: 12 o’clock Backlight type / color LED / white *6 3. MECHANICAL SPECIFICATION Item Specifications Unit 76.9(W)×63.9(H)×3.2(D) mm Resolution 320×(R,G,B)×240 dot Active area 70.08(W)×52.56(H) mm Pixel pitch 0.219(W)×0.219(H) mm Dimensional outline TVL-55733GD035J-LW-G-AAN Ver.C -5- Issue Date: 2013/02/21 TVL-55733GD035J-LW-G-AAN Ver.C -6- DISPLAY SCALE 40/1 RGB 40 MYLAR TAPE SINGLE SIDE AREA STIFFENER Viewing Direction CONDUCTIVE LED FPC E D C B A REVISED RECORD FINISH MATERIAL UNIT SCALE mm 1 TOLERANCE APPROVED BY CONCURRED BY CHECKED BY DRAWN BY ORG DATE ±0.2 02.22.12 vivian 40 DWG NO. M1199B0-1A LCM125020 PROJECT NO: COMPONENT AREA H=1.5 MAX. NOTE：Silicone applied to cover whole pin surface ,but NOT IC 1 320xRGBx240 DOTS NON BENDING AREA P 1 DCN OF A4 1 GPM1199B0 MODULE: BEZEL A VERSION Customer's Approval Customer Date R RooH HS S C CO OM MP PLLIIA AN NT T 4. MECHANICALDIMENSION Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 5. MAXIMUM RATINGS ITEM SYMBOL MIN. MAX. UNIT NOTE Power Supply Voltage VCI -0.3 +4.6 V Note2 Power Supply Voltage VDD -0.3 +4.6 Note2 Operation Temperature Top -20 70 V ℃ Storage Temperature Tstg -30 80 ℃ - 90 %RH Humidity Note1: TA≦40℃ Without dewing Note2: Note1 a. All of voltage listed above are with respective to GND=VSS=0V. b. Device is subject to be damaged permanently if stresses beyond those absolute maximum ratings listed above. TVL-55733GD035J-LW-G-AAN Ver.C -7- Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 6. ELECTRICAL CHARACTERISTICS 6.1.TFT LCD Characteristic Typical operating conditions Item (GND=AVSS=0V) Symbol Min. Typ. Max. Unit VCI 3.0 3.3 3.6 V IOVcc 1.8 3.3 VCI V Power dissipation P - 33 50 mW Current dissipation I - 10 15 mA Power supply Driver Input signal H VIH 0.7* IOVcc - IOVcc V voltage L VIL GND - 0.3* IOVcc V Driver output signal voltage H VOH 0.8* IOVcc - IOVcc V L VOL GND - 0.2* IOVcc V Note 6.2.Backlight Characteristic Item Symbol LED Current Values Unit Min. Typ. Max. IL --- 20 --- mA LED Voltage VL 16.8 --- 21.0 V Power dissipation PL 400 Remark mW Note: KYOCERA DISPLAY suggests using constant current driving this backlight unit. K A TVL-55733GD035J-LW-G-AAN Ver.C -8- Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 7. MODULE FUNCTION DESCRIPTION 7.1.PIN Description Pin Symbol Function 1 NC NC 2 NC NC 3 NC NC 4 NC NC 5 GND Power GND 6 VCI Analog power (3.3V) 7 VCI Analog power (3.3V) 8 IOVcc IO Power(3.3V) 9 GND Power GND 10 /RESET 11 nCS SPI Chip select 12 SCL SPI Clock 13 SDO SPI data output Leave the pin to open when not in use. 14 SDA SPI data input 15 GND Power GND 16 D7 17 GND 18 D6 19 GND 20 D5 21 GND 22 D4 23 GND 24 D3 25 GND 26 D2 27 GND 28 D1 Remark Reset Data input D7 (MSB) Power GND Data input D6 Power GND Data input D5 Power GND Data input D4 Power GND Data input D3 Power GND Data input D2 Power GND Data input D1 TVL-55733GD035J-LW-G-AAN Ver.C -9- Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 29 GND Power GND 30 D0 31 GND Power GND 32 CLK Pixel Clock signal 33 GND Power GND 34 HSYNC Horizontal Sync Input signal 35 VSYNC Vertical Sync Input signal 36 DE 37 LED_K2 Backlight Power (-) 38 LED_K1 Backlight Power (-) 39 LED_A2 Backlight Power (+) 40 LED_A1 Backlight Power (+) Data input D0 (LSB) Data enable signal Fix to GND level when not in use. TVL-55733GD035J-LW-G-AAN Ver.C - 10 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 7.2.Timing characteristics 7.2.1.8-bits serial RGB interface TVL-55733GD035J-LW-G-AAN Ver.C - 11 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 7.2.2.SPI TVL-55733GD035J-LW-G-AAN Ver.C - 12 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T Power ON sequence TVL-55733GD035J-LW-G-AAN Ver.C - 13 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T R08h 0x02h (Back,front porch,setting by real case) Reset R0Bh 0x01h (DE or sync mode,setting by real case) R02h 0x32h (Please follow) R01h 0x12h (Please follow) R10h 0xA7h (Please follow) R11h 0x57h (Please follow) R12h 0x73h (Please follow) R13h 0x72h (Please follow) R07h 0xEFh Turn on Charge-pump R14h 0x73h (Please follow) R15h 0x55h (Please follow) R16h 0x17h (Please follow) R17h 0x62h (Please follow) Power OFF sequence TVL-55733GD035J-LW-G-AAN Ver.C - 14 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T Turn off Charge-pump ( R07h 0xEEh ) Stand by sequence TVL-55733GD035J-LW-G-AAN Ver.C - 15 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T ( R07h 0xEEh ) Turn off charge-pump Turn On charge-pump ( R07h 0xEFh ) 8. ELECTRO-OPTICAL CHARACTERISTICS The following items are measured under stable conditions. The optical characteristics should be measured in dark room or equivalent state with the methods shown in Note 1. Item Symbol Condition Min Typ Max Unit Remark 2 Brightness L 250 280 --cd/m Response time TR+TF Θ=0 --25 --ms Note 2 At the Contrast ratio CR center 250 300 Note 3 point of A.A. TVL-55733GD035J-LW-G-AAN Ver.C - 16 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T White Color Chromaticity Red Green Blue Viewing Angle Horizontal Vertical Wx Wy Wx Wy Wx Wy Wx Wy 3” 9” 12” 6” Θ =0˚ Φ=0˚ Θ =0˚ Φ=0˚ Θ =0˚ Φ=0˚ Θ =0˚ Φ=0˚ CR≧10 (0.29) (0.28) (0.59) (0.30) (0.35) (0.51) (0.10) (0.04) (0.34) (0.33) (0.64) (0.35) (0.40) (0.56) (0.15) (0.09) (0.39) (0.38) (0.69) (0.40) (0.45) (0.61) (0.20) (0.14) 55 60 - 55 60 - 55 40 55 60 - - Note 4 Degree Note 5 Ta=25±2℃ Note: 1.Test equipment setup After stabilizing and leaving the panel alone at a given temperature for 30 minutes, the measurement should be executed. Measurement should be executed in a stable, windless, and dark room. Optical specifications are measured by Topcon BM-7(fast) with a viewing angle of 2° at a distance of 50cm and normal direction. 2.Definition of response time: TR and TF The figure below is the output signal of the photo detector. Display Area Optical Response White 100% Black White TR TF 90% 10% 0% Time 3.Definition of contrast ratio: Contrast ratio (CR) = Brightness measured when LCD is at “white state” Brightness measured when LCD is at “black state” White Vi=Vi50%±1.5V Black Vi=Vi50% m 2.0V ”±” means that the analog input signal swings in phase with VCOM signal. ” m ” means that the analog input signal swings out of phase with VCOM signal. Vi50%: The analog input voltage when transmission is 50%. The 100% transmission is defined as the transmission of LCD panel when all the input TVL-55733GD035J-LW-G-AAN Ver.C - 17 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T terminals of module are electrically opened. 4.Measured at the center area of the panel when all the input terminals of LCD panel are electrically opened. 5. Definition of viewing angle: Normal line θ = 0 ;φ = 0 θL θR φL 12 o’clock direction φ H = 90 φH Left Right θ L = 90 θ R = 90 Top Bottom 6 o’clock direction φ L = 90 9. APPLICATION NOTE 9.1.Suggestion of SPI code Register No. 08h 0Bh 02h Setting Description value 02h Vertical Back Porch Set line inversion 01h Set RGB I/F signal HSYNC+VSYNC mode 32h Set the VCOMH voltage from 0.87 x VREG1OUT. TVL-55733GD035J-LW-G-AAN Ver.C - 18 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T 01h 12h 10h 11h 12h 13h 14h 15h 16h 17h A7h 57h 73h 72h 73h 55h 17h 62h Set the amplitude of Vcom alternating voltage be 1.06 x VREG1OUT. Set Neg_Gamma 1, Pos_Gamma 1 Set Neg_Gamma 2, Pos_Gamma 2 Set Neg_Gamma 3, Pos_Gamma 3 Set Neg_Gamma 4, Pos_Gamma 4 Set Neg_Gamma 5, Pos_Gamma 5 Set Neg_Gamma 6, Pos_Gamma 6 Set Neg_Gamma 7, Pos_Gamma 7 Set Neg_Gamma 8, Pos_Gamma 8 Note: 10.RELIABILITY 10.1.MTTF The LCD module shall be designed to meet a minimum MTTF value of 50,000 hours with normal condition. (25°C in the room without sunlight; not include life time of backlight) 10.2.TESTS NO. 1 ITEM High Temperature Operating CONDITION 70℃ TVL-55733GD035J-LW-G-AAN Ver.C 240 hrs CRITERION 。No Defect Of Operational Function In - 19 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T Low Temperature 2 240 hrs -20℃ Room Temperature Are Operating Allowable(23±5°C). 60℃ ,90%RH ,240 hrs High Temperature/ Humidity Non-Operating 3 High Temperature 4 80℃ 240 hrs Non-Operating Low Temperature Non-Operating 5 -30℃ Temperature Shock 6 Non-Operating 240 hrs -30℃ (30min) 80℃ (5min) (30min) 10 CYCLES 7 Electro-static Discharge HBM：±2kv Note 1: Test after 24 hours in room temperature(23±5°C). Note 2: The sampling above is individually for each reliability testing condition. Note 3: The color fading of polarizing filter should not care. Note 4: All of the reliability testing chamber above, is using D.I. water. (Min value: 1.0 MΩ -cm) Note 5: In case of malfunction defect caused by ESD damage, if it would be recovered to normal state after software resetting, it would be judged as a good part. 10.3.Color performance No. ITEM Criterion (initial) 1 Luminance >50% 2 NTSC >70% 3 Contrast Ratio >50% 11.INSPECTION CRITERIA 11.1.Inspection Conditions 11.1.1.Environmental conditions The environmental conditions for inspection shall be as follows Room temperature: 23±5°C Humidity: 50±20%RH 11.1.2.The external visual inspection With a single 1000±200lux fluorescent lamp as the light source, the inspection TVL-55733GD035J-LW-G-AAN Ver.C - 20 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T was in the distance of 30cm or more from the LCD to the inspector’s eyes. 11.2.Light Method 11.2.1.Environment lamp under 1000±200 lux, Viewing direction for inspection over 30 ㎝ 11.2.2.The distance from eye to defect around 300mm, the distance from ND Filter to defect around 25~30mm Eye 300mm ND Filter Defect place 11.3.Classification Of Defects 11.3.1.Major defect A major defect refers to a defect that may substantially degrade usability for product applications. 11.3.2.Minor defect A minor defect refers to a defect which is not considered to be able substantially degrade the product application or a defect that deviates from existing standards almost unrelated to the effective use of the product or its operation. Notes: If the LCD/LCM ’s cosmetic and display performance do not specify in “inspection criterion”, it should be based on these delivered samples. 11.4.Sampling & Acceptable Quality Level Level II, MIL-STD-105E Cosmetic TVL-55733GD035J-LW-G-AAN Ver.C Major Minor 1.0 % 1.5 % - 21 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T Electrical-display 0.4% 0.65 % 11.5.Definition Of Inspection Area V.A: Viewing Area A.A: Active Area Active Area Viewing Area Outside of Viewing area 11.6.Items and Criteria 11.6.1.Visual inspection criterion in cosmetic (1) Glass defect No Defect Dimension Criteria Remark By engineering diagram Y Z (Minor) 1 X Extensive crack 【Reject】 Cracks 2 (Major) TVL-55733GD035J-LW-G-AAN Ver.C - 22 - Issue Date: 2013/02/21 R RooH HS S C CO OM MP PLLIIA AN NT T (2) LCM appearance defect within A.A No Defect Criteria Round type Permissible Qty Spec. (Minor) ψ ≦ 0.10mm 1 Disregard L: Length, W: Width 2. Disregard if out of A.A. 3 0.20mm