OHI-631-870H

OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: contact@osa-opto.com Series 631 - High current, with lens Features size 1210: 3,3(L) x 2,9(W) x 2,9(H) mm circuit substrate: glass laminated epoxy replacement for PLCC2 higher current up to 50 mA with lens, view angle 40° soldering pads: gold plated, all soldering methods applicable taped in 12 mm blister tape, cathode to transporting perforation all devices sorted into luminous intensity classes on request high radiation intensity types Absolute Maximum Ratings IF, max[mA] 50 IF,P [mA] tp ≤ 100 µs τ=1: 10 250 VR [V] 5 IR, max [µA] 100 Thermal resistance R thJA [K / W] 24 TOp [°C] -40...85 TSt °[C] -55...85 50 40 30 20 Maximal forward current (DC) characteristic IF [mA] 10 0 -40 -20 0 20 40 Top[° C] 60 80 100 Electro-Optical Characteristics Type OHI-631 -870H Marking at cathode Measurement Switching time (rise & fall) IF [mA] typ [ns] max [ns] 50 20 80 VF[V] typ max 1,4 1,6 λp [nm] 870 ±15 Ie[mW/sr] min typ 10 20 © 2004 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 11/04 90 1,0 120 60 150 0,5 30 view angle 0,0 180 0 10 IF (mA) 870H UF – IF characteristic 1 1,0 1,1 1,2 1,3 1,4 UF (V) 1,00 0,75 IV rel (at 50 mA ) 870H 0,50 IF – Ie, rel characteristic 0,25 0,00 10 20 30 40 50 IF (mA) © 2004 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 11/04 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 250 10-20 s T m p era ture (°C) e 230° C 200 150 Max. 40 s 100 IR reflow soldering profile 50 0 50 100 150 200 250 300 T ime (sec) 300 Max. 10 s 250 235° C-260° C First W ave S econd W ave T m p era ture (°C) e 200 150 P rocess Limits 100 4° C/sec. W ave soldering profile 50 0 50 100 150 200 250 T ime (sec) Manual soldering: max power of iron 25W/1s/300° C © 2004 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 11/04 Ordering Code For Parts Series Color Encapsulation Packaging OHI-631 - ??????? - X - T T - taped X - uncolored clear Type definition, e.g. OHI-631 -870H-X -T LED Luminous Intensity Groups And Subgroups [ mW/sr ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. © 2004 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 11/04 Tape And Reel Packing D 180 mm 330 mm Parts/reel 500 2000 Packing: The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. Type Intensity group Charge No. Quantity XXXXXXXXX OHI-631 ?????-??-T ZZ 1122-AAAAAA 9999 Customer order No. 11 Week – 22 year – A internal identification © 2004 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com