152-4.0M-SR-10GT

Oscilent Corporation | 152 Page 1 of 4 Quartz Crystals Series Number Package Description Last Modified 152 . Quartz Crystal FEATURES - Industry standard package - Wide frequency range - Low profile - Excellent reliability/aging - "AT Strip" blank technology - Cost effective - RoHs / Lead Free compliant HC-25US Weld Type Quartz July. 01 2005 . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range Frequency Tolerance Temperature Tolerance Operating Temperature Storage Temperature Shunt Capacitance Load Capacitance Drive Level Aging (First Year) Insulation Resistance CONDITIONS fO Ref @ +25°C TL TOPR TSTG CO CL DL @ +25°C IR CHARACTERISTICS 3.200 ~ 85.00 ±10 ~ ±50 ±20 ~ ±100 -10 ~ +60 -55 ~ +125 7.0 max. 16, 20, 30, Series 0.01 ~ 1000.0 ±5.0 500 (DC100 ±10V) min. UNITS MHz PPM PPM °C °C pF pF µW PPM/Y Mohm . MODE OF OSCILLATION AND EQUIVALENT SERIES RESISTANCE FREQUENCY RANGE (MHz) 3.200 ~ 3.500 3.510 ~ 4.090 4.100 ~ 4.790 4.800 ~ 5.790 5.800 ~ 7.990 8.000 ~ 11.990 MODE Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental ohm max. 200 150 120 100 90 70 FREQUENCY RANGE (MHz) 12.000 ~ 14.000 14.100 ~ 17.000 17.100 ~ 27.000 27.100 ~ 48.000 48.100 ~ 85.000 MODE Fundamental Fundamental Fundamental 3rd Overtone 3rd Overtone ohm max. 50 40 30 80 60 - . Oscilent Corporation | 152 Page 2 of 4 . PART NUMBER GUIDE Series Number Frequency Load Capacitance Tolerance @ +25oC Tolerance Over Temp ( oC ) Operating Temp ( oC ) Value Added 152 HC-25US - 4.0M See table below for standard freq and enter here e.g. 5.815 M OR enter any desired frequency. -SR Enter desired load capacitance. See table below for standard load capacitances Enter SR for series. - 50 Blank * = ±30 PPM or Fill in E.G 10 = ±10 PPM 20 = ±20 PPM Avail. = ±10 ~ ±50 Blank* = G= H= N= K ±50 PPM ±30 PPM ±20 PPM ±100 PPM P= R= S= T= W= P 0~+50 -10~+60 -20~+70 -30~+80 -40~+85 - VS Blank * = Standard IT = Insulator Tab TL = Third Lead L2 = Alt. Third Lead VS = Vinyl Sleeving NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definition of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: Add -TR for Tape/Reel. Click here for tape/reel specifications . STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY/OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) 3.579545 3.6864 4.000 4.032 4.096 4.194304 4.433618 4.9152 5.000 5.0688 5.185 5.9904 6.000 6.144 6.500 LOAD (pF) Series Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. 12 13 16 Std. 17 18 20 Std. Std. Std. Std. Std. Std. Std. Std. Std. 32 Std. Std. Std. - Oscilent Corporation | 152 Page 3 of 4 7.3728 8.000 9.216 9.540 9.8304 10.000 10.738635 11.000 11.0592 11.520 11.98135 12.000 12.000393 12.096 12.288 12.960 14.31818 14.7456 15.000 15.360 16.000 16.000312 16.257 16.9344 17.734475 18.000 18.432 19.6608 20.000 21.47727 22.1184 24.000(F) 24.00014 (F) FREQUENCY (MHz) Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Series 12 13 Std. Std. Std. 16 LOAD (pF) 17 18 Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. 20 Std. Std. Std. 30 F = Fundamental | OT = 3RD Overtone NOTE: Other frequencies and load capacitance available. PLEASE SPECIFY IN PART NUMBER GUIDE Series No.: 152 Oscilent Corporation | 152 Page 4 of 4 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map