161-10.0M-20-25KP

Oscilent Corporation | 161 - 162 Page 1 of 3 Quartz Crystals Series Number Package Description Last Modified 161 ~ 162 . Quartz Crystal FEATURES - Excellent Aging - Wide Frequency range - Low Profile, industry standard package - Excellent reliability - Tape and Reel (1,000 pcs) - Cost effective - RoHs / Lead Free compliant UM-1 / UM-5 Quartz July. 01 2005 . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range Frequency Tolerance Temperature Tolerance Operating Temperature Storage Temperature Shunt Capacitance Load Capacitance Drive Level Aging Insulation Resistance CONDITIONS Fundamental @ +25°C @ +25°C TOPR TSTG CO CL DL @ +25°C IR 161 (UM-1) 10.00 ~ 125.00 162 (UM-5) 16.00 ~ 125.00 UNITS MHz PPM PPM °C °C pF pF mW PPM Mohm ±10 Std. (±5 ~ ±100 Avail.) ±10 Std. (See Table 2 Below) -20 ~ +70 Std. (See Table 2 Below) -55 ~ +125 7 max. 8 - 50, Series, (18pF Std.) 0.05 ~ 1.0 ±5 max. 500 (DC 100 ±10V) min. . TABLE 1 - MODE OF OSCILLATION AND EQUIVALENT SERIES RESISTANCE FREQUENCY RANGE (MHz) 10.00 ~ 15.00 15.00 ~ 20.00 15.00 ~ 25.00 25.00 ~ 30.00 30.00 ~ 75.00 75.00 ~ 100.00 100.00 ~ 125.00 MODE Fundamental Fundamental Fund / 3rd Overtone Fund / 3rd Overtone 3rd / 5th Overtone 3rd / 5th Overtone 5th Overtone MAX ESR UM-1 40 30 25 50 / 70 70 / 80 80 UM-5 40 35 50 70 70 / 80 80 . TABLE 2 - FREQUENCY - TEMPERATURE TOLERANCE ( @+25°C ) Cutting Temperature Range ±5.00 0 ~ +50°C x x Tolerance (x10-6) ±10.0 ±15.0 x ±20.0 x ±30.0 -x Oscilent Corporation | 161 - 162 Page 2 of 3 -10 ~ +60°C AT -20 ~ +70°C -30 ~ +80°C -40 ~ +85°C - O - x x - x x x - x x O x x O available recommended .. . PART NUMBER GUIDE Series Number Frequency Load Capacitance Tolerance @ +25°C Tolerance Over Temp ( °C ) Operating Temp ( °C ) Value Added 161 - 10.0M -20 Enter desired load capacitance. See table below for standard load capacitances Enter SR for series. - 25 Blank = ±30 PPM or Fill in E.G 05 = ±5 PPM 10 = ±10 PPM * Avail. = ±5 ~ ±100 L G = ±30 PPM H = ±20 PPM K = ±15 PPM L = ±10 PPM * M = ±5 PPM R P = 0~+50 R = -10~+60 * S = -20~+70 T = -30~+80 W = -40~+85 - VS Blank * = Standard IT = Insulator Tab TL = Third Lead L2 = Alt. Third Lead VS = Vinyl Sleeving 161 = UM-1 See table below 162 = UM-5 for standard freq. and enter here e.g. 15.0 M OR enter any desired frequency. NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: Indicatse standard variables for that particular characteristic. PACKAGING: Add "-TR" for Tape and Reel. Click here for tape/reel specifications . STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY/OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) 10.000 10.738635 11.000 11.046 11.0592 LOAD (pF) Series Std. Std. Std. Std. Std. 12 13 16 17 18 20 Std. 32 Std. Oscilent Corporation | 161 - 162 Page 3 of 3 11.228 11.520 11.98135 12.000 12.000393 12.096 12.288 13.5168 14.31818 14.690 14.7456 15.000 16.000 16.000312 18.000 18.432 19.6608 20.000 22.1184 24.000(F) 24.00014 (F) 35.2512 (OT) 38.00053 (OT) 40.32 (OT) 48.00 (OT) 49.86 (OT) FREQUENCY (MHz) Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Series 12 13 16 LOAD (pF) 17 Std. Std. Std. Std. Std. Std. Std. 18 Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. 20 Std. 32 F = Fundamental | OT = 3RD Overtone NOTE: Other frequencies and load capacitance available. PLEASE SPECIFY IN PART NUMBER GUIDE Series No.: 161 to 162 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map